Durable water repellent

From Wikipedia, the free encyclopedia
A shiny spherical drop of water on blue cloth
Fluorine-containing durable water repellent makes a fabric water-resistant.

DWR (durable water repellent) is a coating added to fabrics at the factory to make them water-resistant (or hydrophobic). Most factory-applied treatments are fluoropolymer based.[1] Durable water repellents are commonly used in conjunction with waterproof breathable fabrics such as Gore-Tex to prevent the outer layer of fabric from becoming saturated with water. This saturation, called 'wetting out,' can reduce the garment's breathability (moisture transport through the breathable membrane) and let water through. As the DWR wears off over time, re-treatment is recommended when necessary. Many spray-on and wash-in products for treatment of non-waterproof garments and re-treatment of proofed garments losing their water-repellency are available from sources of sporting apparel. Sprays are made by Grangers, Nikwax, McNett, Trek7, and others.

Older methods for factory application of DWR treatments involve applying a solution of a chemical onto the surface of the fabric by spraying or dipping. More recently the chemistry is applied in the vapor phase using Chemical Vapor Deposition (CVD) machinery. The advantages of CVD include: (1) It eliminates the use of hazardous and environmentally harmful solvents in the application process; (2) The process requires less chemical; (3) the waterproof layer is extremely thin and has less effect on the natural look and feel of the fabric. Later advances have eliminated perfluorinated acids, considered to be potentially hazardous to human health by the US Environmental Protection Agency,[2] from the application process. [citation needed]

Re-treating garments

Durable water-repellent finishes tend to wear off over time, and fabrics need to be re-treated to maintain water-repellency. Washing the garment first helps any DWR that remains to work better; a subsequent treatment with a 'spray-on' or 'soak-in' treatment will improve water-repellency.

Top part is ironed after washing and the water repellent is working by making the water bead up. Bottom part was not ironed after washing and becomes soaked.


See also

References

  1. ↑ Durable Water Repellents
  2. ↑ Frequent Questions | PFOA and Fluorinated Telomers | OPPT | OPPTS| US EPA


This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.