Dead bolt

Door with two locks, one in the doorknob and a separate deadbolt.

A dead bolt, dead lock or deadbolt is a locking mechanism distinct from a spring bolt lock because a deadbolt cannot be moved to the open position except by rotating the lock cylinder. The more common spring bolt lock uses a spring to hold the bolt in place, allowing retraction by applying force to the bolt itself. A deadbolt can therefore make a door more resistant to entry without the correct key.

A deadbolt is often used to complement a spring-bolt lock on an entry door to a building.

Common types

A deadlock, if it is cylinder operated, may be either single cylinder or double cylinder. A single cylinder deadlock will accept a key on one side of the lock, but is operated by a twist knob on the other side. Double cylinder locks will accept a key on both sides and therefore do not require (and often do not have) any twist knob. This prevents unwanted unlocking of the door by forced access to the interior twist knob (via a nearby window, for example). Some lock manufacturers also have a "lockable" knob: there a key is always needed on one side (usually external), and a twist knob can be used on the other (internal), unless a button has been pressed, in which case a key is also needed on the (internal) side.^[1][2]

A variant of the standard deadbolt is the vertical deadbolt, invented by Samuel Segal. Vertical deadbolts resist jimmying, in which an intruder inserts a pry bar between the door and the jamb and attempts to pry the bolt out of the door.^[3]

Other types of deadbolts include:

• Single Cylinder with removable thumb-turn
• Classroom Function (thumb-turn only unlocks door)
• Exit Only Function (no external cylinder)
• Push-button Deadbolt (mechanical or electrical)

Safety

This double cylinder design raises a safety issue. In the event of a fire, occupants will be prevented from escaping through double-cylinder locked doors unless the correct key is used. This is often an avoidable cause of death in house fires.^[4] The risk can be mitigated by locking the deadlock only when there are no occupants inside the building, or leaving the key near the keyhole. Some fire departments suggest putting the key on a small nail or screw near the door at floor level, since the cleanest air is at floor level and you may be crawling to get to the exit, thus placing the key where it is easiest to find.

See also

• Door security
• Lock bumping

References

v t e Locksmithing & Lock picking Topics Electric strike Key control Key relevance Lock bumping Lock picking Lockout-tagout Maison key system Rekeying Single-point locking Three-point locking Components Bitting Bolt stump Break Interchangeable core Key blank Key code Keyhole Lockset Shear line Split pin Key types Berlin key Bump key Change key Master key Skeleton key Smart key Tubular key Transponder key Lock designs Bored cylindrical lock Bramah lock Cylinder lock Disc tumbler lock Electromagnetic lock Electronic lock Key retainer Lever tumbler lock (Chubb detector lock) Magnetic-coded lock Magnetic keyed lock Mortise lock Padlock Combination lock Rotary combination lock Time-delay combination locks Pin tumbler lock (Snib) Protector lock Relocking device Time lock Tubular pin tumbler lock Warded lock Wafer tumbler lock 5 lever lock Specific lock types Bicycle lock Chamber lock Child safety lock Dead bolt Keycard lock Kensington Security Slot Luggage lock Power door locks The Club Tools Lockpick Slim Jim Snap gun Tubular lock pick Related Bolt cutter Door chain Exit control lock Famous locksmiths Hex key Keychain Key (engineering) Lock manufacturers Lock puzzle Locksport Rope lock Twistlock Category:Locksmithing Keys Locks Book