Dark field microscopy

From Wikipedia, the free encyclopedia

Dark field microscopy (dark ground microscopy) describes microscopy methods, in both light and electron microscopy, which exclude the unscattered beam from the image. As a result, the field around the specimen (i.e. where there is no specimen to scatter the beam) is generally dark.

Light microscopy applications

In optical microscopy, darkfield describes an illumination technique used to enhance the contrast in unstained samples. It works by illuminating the sample with light that will not be collected by the objective lens, and thus will not form part of the image. This produces the classic appearance of a dark, almost black, background with bright objects on it.

The light's path

The steps are illustrated in the figure where an upright microscope is used.

Diagram illustrating the light path through a dark field microscope.
  1. Light enters the microscope for illumination of the sample.
  2. A specially sized disc, the patch stop (see figure) blocks some light from the light source, leaving an outer ring of illumination. A wide phase annulus can also be reasonably substituted at low magnification.
  3. The condenser lens focuses the light towards the sample.
  4. The light enters the sample. Most is directly transmitted, while some is scattered from the sample.
  5. The scattered light enters the objective lens, while the directly transmitted light simply misses the lens and is not collected due to a direct illumination block (see figure).
  6. Only the scattered light goes on to produce the image, while the directly transmitted light is omitted.

Advantages and disadvantages

Dark field microscopy produces an image with a dark background.
Dark field microscopy is a very simple yet effective technique and well suited for uses involving live and unstained biological samples, such as a smear from a tissue culture or individual water-borne single-celled organisms. Considering the simplicity of the setup, the quality of images obtained from this technique is impressive.

The main limitation of dark field microscopy is the low light levels seen in the final image. This means the sample must be very strongly illuminated, which can cause damage to the sample. Dark field microscopy techniques are almost entirely free of artifacts, due to the nature of the process. However the interpretation of dark field images must be done with great care as common dark features of bright field microscopy images may be invisible, and vice versa.

While the dark field image may first appear to be a negative of the bright field image, different effects are visible in each. In bright field microscopy, features are visible where either a shadow is cast on the surface by the incident light, or a part of the surface is less reflective, possibly by the presence of pits or scratches. Raised features that are too smooth to cast shadows will not appear in bright field images, but the light that reflects off the sides of the feature will be visible in the dark field images.

  • Comparison of transillumination techniques used to generate contrast in a sample of tissue paper. 1.559 μm/pixel (when viewed at full resolution).

  • Dark field illumination, sample contrast comes from light scattered by the sample.

  • Bright field illumination, sample contrast comes from absorbance of light in the sample.

  • Cross-polarized light illumination, sample contrast comes from rotation of polarized light through the sample.

  • Phase contrast illumination, sample contrast comes from interference of different path lengths of light through the sample.

Use in computing

Dark field microscopy has recently been used in computer mouse pointing devices, in order to allow an optical mouse to work on transparent glass by imaging microscopic flaws and dust on its surface.

Transmission electron microscope applications

Main article: transmission electron microscopy
Weak beam DF of strain around nuclear track cores.

Darkfield studies in transmission electron microscopy play a powerful role in the study of crystals and crystal defects, as well as in the imaging of individual atoms.

Conventional darkfield imaging

Briefly, imaging[1] involves tilting the incident illumination until a diffracted, rather than the incident, beam passes through a small objective aperture in the objective lens back focal plane. Darkfield images, under these conditions, allow one to map the diffracted intensity coming from a single collection of diffracting planes as a function of projected position on the specimen, and as a function of specimen tilt.

In single crystal specimens, single-reflection darkfield images of a specimen tilted just off the Bragg condition allow one to "light up" only those lattice defects, like dislocations or precipitates, which bend a single set of lattice planes in their neighborhood. Analysis of intensities in such images may then be used to estimate the amount of that bending. In polycrystalline specimens, on the other hand, darkfield images serve to light up only that subset of crystals which is Bragg reflecting at a given orientation.

Weak beam imaging

Digital darkfield of internal twins.

Weak beam imaging involves optics similar to conventional darkfield, but use of a diffracted beam harmonic rather than the diffracted beam itself. Much higher resolution of strained regions around defects can be obtained in this way.

Low and high angle annular darkfield imaging

Annular dark-field imaging requires one to form images with electrons diffracted into an annular aperture centered on, but not including, the unscattered beam. For large scattering angles in a scanning transmission electron microscope, this is sometimes called Z-contrast imaging because of the enhanced scattering from high atomic number atoms.

Digital darkfield analysis

This a mathematical technique intermediate between direct and reciprocal (Fourier-transform) space for exploring images with well-defined periodicities, like electron microscope lattice-fringe images. As with analog darkfield imaging in a transmission electron microscope, it allows one to "light up" those objects in the field of view where periodicities of interest reside. Unlike analog darkfield imaging it may also allow one to map the Fourier-phase of periodicities, and hence phase-gradients which provide quantitative information on vector lattice-strain.

See also

External links and references

Library resources about
Dark field microscopy
Wikimedia Commons has media related to Dark-field microscopy.

Footnotes

  1. ↑ P. Hirsch, A. Howie, R. Nicholson, D. W. Pashley and M. J. Whelan (1965/1977) Electron microscopy of thin crystals (Butterworths/Krieger, London/Malabar FL) ISBN 0-88275-376-2
Optical microscopy
Illumination and
contrast methods
Fluorescence methods
Sub-diffraction
limit techniques

This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.