Cray

Cray Inc.

Type	Public
Traded as	NASDAQ: CRAY
Founded	1972 as Cray Research, Inc.
Founder(s)	Seymour Cray
Headquarters	Seattle, Washington, United States
Key people	Peter J. Ungaro
Products	Supercomputers
Revenue	US$421.06 million (2012)[1]
Operating income	US$168.06 million (2012)[1]
Net income	US$161.24 million (2012)[1]
Total assets	US$510.31 million (2012[1]
Total equity	US$340.55 million (2012)[1]
Employees	929 (Dec 2012)[1]
Website	cray.com

Cray Inc. is an American supercomputer manufacturer based in Seattle, Washington.^[1] The company's predecessor, Cray Research, Inc. (CRI), was founded in 1972 by computer designer Seymour Cray.^[2] Seymour Cray went on to form the spin-off Cray Computer Corporation (CCC), in 1989, which went bankrupt in 1995, while Cray Research was bought by SGI the next year. Cray Inc. formed in 2000 when Tera Computer Company purchased the Cray Research Inc. business from SGI and adopted the name of its acquisition.^[3]

Company history

Background: 1950 to 1972

Seymour Cray began working in the computing field in 1950 when he joined Engineering Research Associates (ERA) in Saint Paul, Minnesota. There, he helped to create the ERA 1103. ERA eventually became part of UNIVAC, and began to be phased out. He left the company in 1960, a few years after former ERA employees set up Control Data Corporation (CDC). He eventually set up a lab at his home in Chippewa Falls, Wisconsin, about 85 miles to the east. Cray had a string of successes at CDC, including the CDC 6600 and CDC 7600.

Cray Research Inc. and Cray Computer Corporation: 1972 to 1996

Cray-2 supercomputer.

When CDC ran into financial difficulties in the late 1960s, development funds for his follow-on CDC 8600 became scarce, and when he was told the project would have to be put "on hold" in 1972, Cray left to form his own company, Cray Research Inc., with research and development facilities in Chippewa Falls and the business headquarters in Minneapolis. The company's first product, the Cray-1 supercomputer, was a major success because it was faster than all other computers at the time. The first system was sold within a month for US$8.8 million. Seymour Cray continued working, this time on the Cray-2, though it only ended up being marginally faster than the Cray X-MP, developed by another team at the company.

Cray soon left the CEO position to become an independent contractor. He started a new VLSI technology lab for the Cray-2 in Boulder, Colorado, Cray Laboratories, in 1979, which were closed in 1982; undaunted, Cray later headed a similar spin-off in 1989, Cray Computer Corporation (CCC) in Colorado Springs, where he worked on the Cray-3 project—the first attempt at major use of gallium arsenide (GaAs) semiconductors in computing. However, the changing political climate (collapse of the Warsaw Pact and the end of the Cold War) resulted in poor sales (only one Cray-3 was delivered) and the company fell by the wayside, eventually filing for bankruptcy in 1995. CCC's remains then began Cray's final corporation, SRC Computers, Inc. which still exists.

Cray Research continued development along a separate line of computers, originally with lead designer Steve Chen and the Cray X-MP. After Chen's departure, the Cray Y-MP, Cray C90 and Cray T90 were developed on the original Cray-1 architecture but achieved much greater performance via multiple additional processors, faster clocks, and wider vector pipes. The uncertainty of the Cray-2 project gave rise to a number of Cray-object-code compatible "Crayette" firms: Scientific Computer Systems (SCS), American Supercomputer, Supertek, and perhaps one other firm. These firms did not mean to compete against Cray and therefore attempted less expensive, slower CMOS versions of the X-MP with the release of the COS operating system (SCS) and the CFT Fortran compiler; they also considered National labs (LANL/LLNL) developed CTSS operating system as well before caving in to the tide of Unixes.

Cray T3E processor board

A series of massively parallel computers from Thinking Machines, Kendall Square Research, Intel Supercomputing Systems Division, nCUBE, MasPar and Meiko Scientific took over the 1980s high performance market. At first, Cray Research denigrated such approaches by complaining that developing software to effectively use the machines was difficult — a true complaint in the era of the ILLIAC IV, but becoming less so each day. Cray eventually realized that the approach was likely the only way forward and started a five-year project to capture the lead in this area: the plan's result was the DEC Alpha-based Cray T3D and Cray T3E series, which left Cray as the only remaining supercomputer vendor in the market besides NEC by 2000.

Most sites with a Cray installation were considered a member of the "exclusive club" of Cray operators. Cray computers were considered quite prestigious because Crays were extremely expensive machines, and the number of units sold was small compared to ordinary mainframes. This perception extended to countries as well: to boost the perception of exclusivity, Cray Research's marketing department had promotional neckties made with a mosaic of tiny national flags illustrating the "club of Cray-operating countries".(Computer History Museum, Cray 1 30th Anniversary recorded presentation, 2006)

New vendors introduced small supercomputers, known as minisupercomputers (as opposed to superminis) during the late 1980s and early 1990s, which out-competed low-end Cray machines in the market. The Convex Computer series, as well as a number of small-scale parallel machines from companies like Pyramid Technology and Alliant Computer Systems were particularly popular. One such vendor was Supertek, whose S-1 machine was an air-cooled CMOS implementation of the X-MP processor. Cray purchased Supertek in 1990 and sold the S-1 as the Cray XMS, but the machine proved problematic; meanwhile, their not-yet-completed S-2, a Y-MP clone, was later offered as the Cray Y-MP EL (later becoming the EL90 series) which started to sell in reasonable numbers in 1991-92—mostly smaller companies, notably in the oil exploration business. This line evolved into the Cray J90 and eventually the Cray SV1 in 1998.

In December 1991, Cray purchased some of the assets of Floating Point Systems, another minisuper vendor who had moved into the file server market with their SPARC-based Model 500 line.^[4] These SMP machines scaled up to 64 processors and ran a modified version of Sun Microsystems' Solaris. Cray set up Cray Research Superservers, Inc. (later the Business Systems Division) to sell this system as the Cray S-MP, later replacing it with the Cray CS6400. In spite of these machines being some of the most powerful available when applied to appropriate workloads, Cray was never very successful in this market, possibly due to it being so foreign to their existing market niche.

Silicon Graphics: 1996 to 2000

Cray Research merged with Silicon Graphics (SGI) in February 1996. At the time the industry was highly critical of the move, noting that there was little overlap between the two companies in terms of market or technology. Founder Seymour Cray died as a result of a traffic accident later that year.

SGI immediately sold off the Superservers business to Sun, who quickly turned the UltraSPARC-based Starfire project then under development into the extremely successful Enterprise 10000 range of servers.

SGI did use a number of Cray technologies in their attempt to move from the graphics workstation market into supercomputing. Key among these was the use of the Cray-developed HIPPI data-bus and details of the interconnects used in the T3 series.

SGI's long-term strategy was to merge their high-end server line with Cray's product lines in two phases, code-named SN1 and SN2 (SN standing for "Scalable Node"). The SN1 was intended to replace the T3E and SGI Origin 2000 systems and later became the SN-MIPS or SGI Origin 3000 architecture. The SN2 was originally intended to unify all high-end/supercomputer product lines including the T90 into a single architecture. This goal was never achieved before SGI divested itself of the Cray business, and the SN2 name was later associated with the SN-IA or SGI Altix 3000 architecture.

Under SGI ownership, one new Cray model line, the SV1, was launched in 1998. This was a clustered SMP vector processor architecture, developed from J90 technology.

SGI set up a separate Cray Research Business Unit in August 1999 in preparation for detachment. On March 2, 2000, the unit was sold to Tera Computer Company. Tera Computer Company was then renamed Cray Inc. when the deal closed on April 4.

Cray Inc.: 2000 to present

After the Tera merger, the Tera MTA system was relaunched as the Cray MTA-2. This was not a commercial success and shipped to only two customers. Cray Inc. also unsuccessfully badged the NEC SX-6 supercomputer as the Cray SX-6 and acquired exclusive rights to sell the SX-6 in the USA, Canada and Mexico.

In 2002, Cray Inc. announced their first new model, the Cray X1 combined architecture vector / MPP supercomputer. Previously known as the SV2, the X1 is the end result of the earlier SN2 concept originated during the SGI years. In May 2004, Cray was announced to be one of the partners in the U.S. Department of Energy's fastest-computer-in-the-world project to build a 50 teraflops machine for the Oak Ridge National Laboratory. As of November 2004, the Cray X1 had a maximum measured performance of 5.9 teraflops, being the 29th fastest supercomputer in the world. Since then the X1 has been superseded by the X1E, with faster dual-core processors.

On October 4, 2004, the company announced the Cray XD1 range of entry-level supercomputers which use dual-core 64-bit AMD Opteron CPUs running Linux. This system was previously known as the OctigaBay 12K before Cray's acquisition of that company. The XD1 provided one Xilinx Virtex II Pro field-programmable gate array (FPGA) with each node of four Opteron processors. The FPGAs could be configured to embody various digital hardware designs and could augment the processing or input/output capabilities of the Opteron processors. Furthermore, each FPGA contains a pair of PowerPC 405 processors which can add to the already considerable power of a single node. The Cray XD1, although moderately successful, was eventually discontinued.

In 2004, Cray completed the Red Storm system for Sandia National Laboratories. Red Storm was to become the jumping-off point for a string of successful products that eventually revitalized Cray in supercomputing. Red Storm had processors clustered in 96 unit cabinets, a theoretical maximum of 300 cabinets in a machine, and a design speed of 41.5 teraflops. Red Storm also included an innovative new design for network interconnects, which was dubbed SeaStar and destined to be the centerpiece of succeeding innovations by Cray. The Cray XT3 massively parallel supercomputer became a commercialized version of Red Storm, similar in many respects to the earlier T3E architecture, but, like the XD1, using AMD Opteron processors. The Cray XT4, introduced in 2006 added support for DDR2 memory, newer dual-core and future quad-core Opteron processors and utilized a second generation SeaStar2 communication coprocessor. It also included an option for FPGA chips to be plugged directly into processor sockets, unlike the Cray XD1, which required a dedicated socket for the FPGA coprocessor.^[5]

On November 13, 2006, Cray announced a new system, the Cray XMT, based on the MTA series of machines.^[6][7] This system combined multi-threaded processors, as used on the original Tera systems, and the SeaStar2 interconnect used by the XT4. By reusing ASICs, boards, cabinets, and system software used by the comparatively higher volume XT4 product, the cost of making the very specialized MTA system can be reduced. A second generation of the XMT is scheduled for release in 2011, with the first system ordered by the Swiss National Supercomputing Center (CSCS).^[8]

In 2006, Cray announced a vision of products dubbed 'Adaptive Supercomputing'.^[9] The first generation of such systems, dubbed the Rainier Project, used a common interconnect network (SeaStar2), programming environment, cabinet design, and I/O subsystem. These systems included the existing XT4 and the XMT. The second generation, launched as the XT5h, allowed a system to combine compute elements of various types into a common system, sharing infrastructure. The XT5h combined Opteron, vector, multithreaded, and FPGA compute processors in a single system.

In April 2008, Cray and Intel announced they would collaborate on future supercomputer systems. This partnership produced the Cray CX1 system, launched in September the same year. This was a deskside blade server system, comprising up to 16 dual- or quad-core Intel Xeon processors, with either Microsoft Windows HPC Server 2008 or Red Hat Enterprise Linux installed. In early 2010, Cray also introduced the Cray CX1000, a rack-mounted system with a choice of compute-based, GPU-based, or SMP-based chassis. The CX1 and CX1000 product lines were sold until late 2011.

By 2009, the largest computer system Cray had delivered was the XT5 system at National Center for Computational Sciences at Oak Ridge National Laboratories.^[10] This system, with over 224,000 processing cores, was dubbed Jaguar and was the fastest computer in the world as measured by the LINPACK benchmark^[11] at the speed of 1.75 petaflops^[12] until being surpassed by the Tianhe-1A in October 2010. It was the first system to exceed a sustained performance of 1 petaflops on a 64-bit scientific application.

In May 2010 the Cray XE6 supercomputer was announced. The Cray XE6 system had at its core the new Gemini system interconnect. This new interconnect included a true global-address space represented a return to the T3E feature set that had been so successful with Cray Research. This product was a successful follow-on the XT3,XT4 and XT5 products. The first multi-cabinet XE6 system was shipped in July 2010. The next generation Cascade^[13] systems were designed make use of future multicore and/or manycore processors from vendors such as Intel and NVIDIA. Cascade is scheduled to be introduced in early 2013 and designed to use the next-generation network chip and follow-on to Gemini, code named Aries.

In 2011, Cray announced the Cray XK6 hybrid supercomputer. The Cray XK6 system, capable of scaling to 500,000 processors and 50 petaflops of peak performance, combines Cray's Gemini interconnect, AMD's multi-core scalar processors, and NVIDIA's Tesla GPGPU processors. In October 2012 Cray announced the Cray XK7 which supports the NVIDIA Kepler GPGPU and announced that the ORNL Jaguar system would be upgraded to an XK7 (renamed Titan) and capable of over 20 petaflops. Titan was the world's fastest supercomputer as measured by the LINPACK benchmark^[14] until the introduction of the Tianhe-2 in 2013, which is substantially faster. In 2011 Cray also announced it had been awarded the $188M US Blue Waters contract with the University of Illinois, after IBM had pulled out of the delivery.^[15] This system was delivered in 2012 and was the largest system to date, in terms of cabinets and general-purpose x86 processors, that Cray had ever delivered.

In November 2011, the Cray Sonexion 1300 Data Storage System was introduced and signaled Cray entry into the high performance storage business. This product used modular technology and a Lustre file system.

In April 2012, Cray Inc. announced the sale of its interconnect hardware development program and related intellectual property to Intel Corporation for $140 million USD.^[16][17]

On November 9, 2012, Cray announced the acquisition of Appro International, Inc., a California based privately held developer of advanced scalable supercomputing solutions.^[18] Currently the #3 provider on the Top100 supercomputer list, Appro builds some of the world's most advanced high performance computing (HPC) cluster systems.

On November 1st 2013 Cray announced the acquisition of the Gnodal IP and team in Europe.^[19][20]

References

Further reading

• Murray, Charles J. (1997). The Supermen: The Story of Seymour Cray and the Technical Wizards behind the Supercomputer. New York: John Wiley & Sons. ISBN 0-471-04885-2. 

External links

Wikimedia Commons has media related to Cray.

• Official website
• Cray SEC Filings
• Cray Manuals Library @ Computing History
• Cray Manuals at bitsavers.org
• Historic Cray Research Marketing Materials at the Computer History Museum
• Cray-Cyber.org - Working Cray machines with free login
• Top 500 Supercomputers
• Fred Gannett's Cray Supercomputer FAQ
• Cray User Group
• Cray Research Alumni Site
• DigiBarn Computer Museum: Cray Supercomputers and Memorabilia
• Cray headquarters is at coordinates 47°36′22″N 122°19′55″W / 47.6060°N 122.3320°W / 47.6060; -122.3320

Related information

v t e Cray computers Cray Research Cray-1 Cray X-MP Cray-2 Cray Y-MP Cray XMS Cray Y-MP EL Cray C90 Cray EL90 Cray T3D Cray J90 Cray T90 Cray T3E Cray SV1 Cray Computer Corp. Cray-3 Cray-3/SSS Cray-4 Cray Research Superservers Cray APP Cray S-MP Cray CS6400 Cray Inc. Cray SX-6 Cray MTA-2 Cray Red Storm Cray X1 Cray XT3 Cray XD1 Cray XT4 Cray XMT Cray XT5 Cray CX1 Cray XT6 Cray XE6 Cray CX1000 Cray XK6 Cray XK7 Cray XC30 YarcData uRiKA Threadstorm4