Coded mark inversion

In telecommunication, coded mark inversion (CMI) is a non-return-to-zero (NRZ) line code. It encodes zero bits as a half bit time of zero followed by a half bit time of one, and while one bits are encoded as a full bit time of a constant level. The level used for one bits alternates each time one is coded.

This is vaguely reminiscent of, but quite different from, Miller encoding, which also uses half-bit and full-bit pulses, but additionally uses the half-one/half-zero combination and arranges them so that the signal always spends at least a full bit time at a particular level before transitioning again.

CMI doubles the bitstream frequency, when compared to its simple NRZ equivalent, but allows easy and reliable clock recovery.

References

• ITU-T G.703 (11/2001), Annex A, A.3 Definition of CMI.
• US 4325053, Pierre Le Brozec; Francois Ferret & Pierre Doussoux, "Method and a circuit for decoding a C.M.I. encoded binary signal", issued 1982-04-13  (google patents link)

See also

Wikimedia Commons has media related to Coded mark inversion.

• Manchester code

v t e Line coding (digital baseband transmission) Main articles Unipolar encoding Bipolar encoding On-off keying Basic line codes Return to zero (RZ) Non-return-to-zero, level (NRZ/NRZ-L) Non-return-to-zero, inverted (NRZ-I) Non-Return-to-Zero, space (NRZ-S) Manchester Differential Manchester/Biphase (Bi-φ) Extended line codes Conditioned Diphase 4B3T 4B5B 2B1Q Alternate Mark Inversion Modified AMI code Coded mark inversion MLT-3 encoding Hybrid ternary code 6b/8b encoding 8b/10b encoding 64b/66b encoding Eight-to-fourteen modulation Delay/Miller encoding TC-PAM Optical line codes Carrier-Suppressed Return-to-Zero Alternate-Phase Return-to-Zero See also: Baseband Baud Bit rate Digital signal Digital transmission Ethernet physical layer Pulse modulation methods Pulse-amplitude modulation (PAM) Pulse code modulation (PCM) Serial communication Category:Line codes