Centrifugal railway

Centrifugal railway
Original design drawings of the Centrifugal Railway
Opening date	1840s
General statistics
Designer	Clavieres; Hutchinson, Higgins et al.
Inversions	1
Locations	Various locations in the United Kingdom and France

Centrifugal railway was the name of a number of early looping roller coasters that were built in Western Europe in the middle of the 19th century. The rides were similar in their basic design to many modern day shuttle roller coasters (i.e., they did not make a complete circuit), but with only one lift hill and no launch. A single roller coaster car would ascend to the tallest point on the coaster before descending rapidly down the same hill and then passing through the central loop at high speeds with large amounts of centripetal and reactive centrifugal force.^[1] The size of these centrifugal railways differed; some were purported to have vertical loops of a mere 6.5 feet (2.0 m),^[1] while others were estimated to be 40 feet (12 m)^[2] (although, as described below, early coaster designers were prone to cases of gross exaggeration).^[1]

History

It was not long after the creation of the first wheeled roller coasters in the late 18th century or the early 19th century^[3] that the first roller coaster inversion was designed. This first design was created in 1833 by an engineer named Clavieres, but it was not implemented into a functioning ride until more than a decade later. In 1843, designers Hutchinson and Higgins registered a design and exhibited a "Centrifugal Iron Railway" at theaters in various British cities including London, Manchester,^[4] and Liverpool.^[2]

A more permanent outdoor version called the "Centrifugal Railway", the first permanent looping roller coaster, was installed at the Frascati Gardens in Paris in 1846.^[5] The coaster had a 43-foot (13 m) drop and a 13-foot (4.0 m) loop.^[6][7]

Although installations were later placed in the cities of Bordeaux, Havre, and Lyons, the ride ultimately proved to be unpopular and more looping roller coasters were not built for nearly twenty years.^[1]

The centrifugal railways built in the 1840s were extensively tested before allowing human riders.^[2] The operators of the Railways tested the rides with a variety of things occupying the cars, including egg crates, glasses of water, flowers, sandbags, and even a monkey.^[1] Although the 1840s centrifugal railways had no reported safety issues, a later version built in 1865 at the Cirque Napoléon was quickly closed by police after the first car sent through the loop derailed.^[1]

Ride experience

A detailed sketch of a centrifugal railway in Manchester

There are few first-hand accounts that remain preserved from riders of the various centrifugal railways. Ride operators and promoters engaged in incredible levels of exaggeration regarding the speed and dimensions of the ride. For example, one individual made the absurd claim that the centrifugal railway reached a "terrific speed...[of] more than one hundred and fifty miles per hour"^[1] (By comparison, this is the approximate speed Formula Rossa, the world's fastest roller coaster, currently reaches).^[8] Although reports by some were favorable, the ride's overall success was poor, and it became the subject of derision in various editorial cartoons of the day.^[1] The centrifugal railways shared a circular loop shape that produced intense g-forces on riders of Lina Beecher's 1895 Flip Flap Railway. This circular shape differed from the teardrop-shaped loops which are used in modern roller coaster inversions—producing lower g-forces and less rider discomfort.^[5]

References