Cantor function

From Wikipedia, the free encyclopedia
The graph of the Cantor function on the unit interval

In mathematics, the Cantor function, named after Georg Cantor, is an example of a function that is continuous, but not absolutely continuous. It is also referred to as the Devil's staircase.

Definition

See figure. To formally define the Cantor function c : [0,1] → [0,1], let x be in [0,1] and obtain c(x) by the following steps:

  1. Express x in base 3.
  2. If x contains a 1, replace every digit after the first 1 by 0.
  3. Replace all 2s with 1s.
  4. Interpret the result as a binary number. The result is c(x).

For example:

  • 1/4 becomes 0.02020202... base 3; there are no 1s so the next stage is still 0.02020202...; this is rewritten as 0.01010101...; when read in base 2, this is 1/3 so c(1/4) = 1/3.
  • 1/5 becomes 0.01210121... base 3; the digits after the first 1 are replaced by 0s to produce 0.01000000...; this is not rewritten since there are no 2s; when read in base 2, this is 1/4 so c(1/5) = 1/4.
  • 200/243 becomes 0.21102 (or 0.211012222...) base 3; the digits after the first 1 are replaced by 0s to produce 0.21; this is rewritten as 0.11; when read in base 2, this is 3/4 so c(200/243) = 3/4.

Properties

The Cantor function challenges naive intuitions about continuity and measure; though it is continuous everywhere and has zero derivative almost everywhere, c goes from 0 to 1 as x goes from 0 to 1, and takes on every value in between. The Cantor function is the most frequently cited example of a real function that is uniformly continuous (precisely, it is Hölder continuous of exponent α = log2/log3) but not absolutely continuous. It is constant on intervals of the form (0.x1x2x3...xn022222..., 0.x1x2x3...xn200000...), and every point not in the Cantor set is in one of these intervals, so its derivative is 0 outside of the Cantor set. On the other hand, it has no derivative at any point in an uncountable subset of the Cantor set containing the interval endpoints described above.

Extended to the left with value 0 and to the right with value 1, it is the cumulative probability distribution function of a random variable that is uniformly distributed on the Cantor set. This distribution, called the Cantor distribution, has no discrete part. That is, the corresponding measure is atomless. This is why there are no jump discontinuities in the function; any such jump would correspond to an atom in the measure.

However, no non-constant part of the Cantor function can be represented as an integral of a probability density function; integrating any putative probability density function that is not almost everywhere zero over any interval will give positive probability to some interval to which this distribution assigns probability zero.

The Cantor function is the standard example of a singular function.

The Cantor function is non-decreasing, and so in particular its graph defines a rectifiable curve. The arc length of the graph is 2.[1]

Alternative definitions

Iterative construction

Below we define a sequence {ƒn} of functions on the unit interval that converges to the Cantor function.

Let ƒ0(x) = x.

Then, for every integer n 0, the next function ƒn+1(x) will be defined in terms of ƒn(x) as follows:

Let ƒn+1(x) = 0.5 × ƒn(3x),  when 0 ≤ x ≤ 1/3;

Let ƒn+1(x) = 0.5,  when 1/3 ≤ x ≤ 2/3;

Let ƒn+1(x) = 0.5 + 0.5 × ƒn(3x 2),  when 2/3 ≤ x ≤ 1.

The three definitions are compatible at the end-points 1/3 and 2/3, because ƒn(0) = 0 and ƒn(1) = 1 for every n, by induction. One may check that ƒn converges pointwise to the Cantor function defined above. Furthermore, the convergence is uniform. Indeed, separating into three cases, according to the definition of ƒn+1, one sees that

\max _{{x\in [0,1]}}|f_{{n+1}}(x)-f_{n}(x)|\leq {\frac  12}\,\max _{{x\in [0,1]}}|f_{{n}}(x)-f_{{n-1}}(x)|,\quad n\geq 1.

If ƒ denotes the limit function, it follows that, for every n  0,

\max _{{x\in [0,1]}}|f(x)-f_{n}(x)|\leq 2^{{-n+1}}\,\max _{{x\in [0,1]}}|f_{1}(x)-f_{0}(x)|.

Also notice that the choice of starting function does not really matter, provided ƒ0(0) = 0, ƒ0(1) = 1 and ƒ0 is bounded.

Fractal volume

The Cantor function is closely related to the Cantor set. The Cantor set C can be defined as the set of those numbers in the interval [0, 1] that do not contain the digit 1 in their base-3 (triadic) expansion, except if the 1 is followed by zeros only (in which case the tail 1000\ldots can be replaced by 0222\ldots to get rid of any 1). It turns out that the Cantor set is a fractal with (uncountably) infinitely many points (zero-dimensional volume), but zero length (one-dimensional volume). Only the D-dimensional volume H_{D} (in the sense of a Hausdorff-measure) takes a finite value, where D=\log(2)/\log(3) is the fractal dimension of C. We may define the Cantor function alternatively as the D-dimensional volume of sections of the Cantor set

f(x)=H_{D}(C\cap (0,x)).

There is [2]

H_{D}\left({C\cap \left({a,b}\right)}\right)+H_{D}\left({C\cap \left({b,c}\right)}\right)=H_{D}\left({C\cap \left({a,c}\right)}\right),

where the set C is a Cantor set.

If the set C is a Cantor set, then we have a Lebesgue-cantor staircase function,[3][4] namely,

H_{D}\left({C\cap \left({a,b}\right)}\right)=\Gamma \left({1+D}\right)_{a}I_{b}^{{\left(D\right)}}1,

where

_{a}I_{b}^{{\left(D\right)}}1={\frac  {1}{\Gamma \left({1+\alpha }\right)}}\int _{a}^{b}{\left({dt}\right)^{D}}

denotes local fractional integral operator.[5]

As a direct result, we have

H_{D}\left({C\cap \left({a,b}\right)}\right)=(b-a)^{D}.

such that

f\left(x\right)=H_{D}\left({F\cap \left({0,x}\right)}\right)=x^{D},
f\left(x\right)=H_{D}\left({F\cap \left({a,x}\right)}\right)=(x-a)^{D}.

Generalizations

Let

y=\sum _{{k=1}}^{\infty }b_{k}2^{{-k}}

be the dyadic (binary) expansion of the real number 0 ≤ y ≤ 1 in terms of binary digits bk = {0,1}. Then consider the function

C_{z}(y)=\sum _{{k=1}}^{\infty }b_{k}z^{{k}}.

For z = 1/3, the inverse of the function x = 2 C1/3(y) is the Cantor function. That is, y = y(x) is the Cantor function. In general, for any z < 1/2, Cz(y) looks like the Cantor function turned on its side, with the width of the steps getting wider as z approaches zero.

Minkowski's question mark function visually loosely resembles the Cantor function, having the general appearance of a "smoothed out" Cantor function, and can be constructed by passing from a continued fraction expansion to a binary expansion, just as the Cantor function can be constructed by passing from a ternary expansion to a binary expansion. The question mark function has the interesting property of having vanishing derivatives at all rational numbers.

References

  1. http://math.stackexchange.com/questions/27859/arc-length-of-the-cantor-function
  2. X. -J., Yang. (2012). Advanced Local Fractional Calculus and Its Applications. World Science Publisher. ISBN 978-1-938576-01-0. 
  3. X. -J., Yang. (2011). Local Fractional Functional Analysis and Its Applications. Asian Academic Publisher. ISBN 978-988-19132-1-0. 
  4. Yang, X. -J. (2012). "Heat transfer in discontinuous media". Advances in Mechanical Engineering and its Applications 1 (3): 47–53. 
  5. Yang, X. -J., Baleanu. D. (2013). "Fractal heat conduction problem solved by local fractional variation iteration method". Thermal Science 17 (2): 625–628. doi:10.2298/TSCI121124216Y. 

External links

This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.