Bodging

Bodging is a traditional wood-turning craft, using green (unseasoned) wood to make chair legs and other cylindrical parts of chairs.

Etymology

The origins of the term are obscure. It may be a folk extension of beech or birch+suffix -er- one who works or is involved with beech or birch- common woods employed by the bodger. Another theory is that bodges, defined as rough sacks of corn, closely resembled packages of finished goods the bodgers carried when they left the forest or workshop. Yet another theory is that bodger was a corruption of badger, as similarly to the behaviour of a badger, the bodger dwelt in the woods and seldom emerged until evenings.^[1]

Other theories about its origin include the German word Böttcher (cooper, a trade that uses similar tools), and similar Scandinavian words, such the Danish name Bødker. These words have similar origins to the English word butt, as in water butt. More on this at Cooper (profession).

Note: There is no known etymology of the modern term bodger referring to skilled woodworkers. It first appears c. 1910, and only applied to a few dozen turners around High Wycombe, the reference quoted above dated 1879 can not refer to this type of bodger. All the hypotheses above are pure guesswork and not supported by etymologists. The etymology of the bodger and botcher (poor workmanship) is well recorded from Shakespeare onwards, and now the two terms are synonymous.

Tools

Shave horse

Polelathe in a museum in Seiffen, Germany.

The bodger's equipment was so easy to move and set up that it was easier to go to the timber and work it there than to transport it to a workshop. The completed chair legs were sold to furniture factories to be married with other chair parts made in the workshop.^[2]

Common bodger's or bodging tools included:

• the polelathe and a variety of chisels, and likely sharpening stones or grinding wheel for honing the rapidly blunted tools (which are blunted far more rapidly than if used to shape seasoned wood stock- for turning and finishing the chair leg or stretcher pole (the horizontal structural member joining the chair-legs- to prevent them splaying
• the spokeshave-like drawknife: for crudely rounding billets of green wood to be intermediately finished for the wood-turner. This is because "green" wood is far easier to slice near-finished to shape with the grain than to cut against the grain as per turning on the lathe.
• trestle or saw-horse (likely fabricated in the forest as required)
• a coarse saw: for cutting fallen or newly felled wood to length
• axes and adzes: for hewing wood into rough billets
• a shave horse to firmly hold the wooden billets for using the drawknife

Accommodation

A bodger commonly camped in the open woods in a "bodger's hovel" or basic "lean-to"-type shelter constructed of forest-floor lengths suitable for use as poles lashed, likely with twine, together to form a simple triangular frame for waterproof thatch roof. The "sides" of the shelter may have been enclosed in wicker or wattled manner to keep out driving rain, animals, etc.^[3][4]

Note: It should be noted that these "camps" were not where the bodgers lived, just where they worked during the day. They lived in cottages in the villages of the area and walked to work each day. They were no more "itinerant" than a modern day dry stone waller or thatcher.

High Wycombe lathe

High-Wycombe lathe became a commonly used generic term to describe any wooden-bed pole lathe, irrespective of user or location, and remained the bodger's preferred lathe until the 1960s when the trade died out, losing to the more cost-effective and rapid mechanised mass production factory methods.^[4][5]

Wycombe Wanderers Football Club's official mascot is a man called Bodger.^[6]

History

The term was once common around the furniture-making town of High Wycombe in Buckinghamshire, England. Bodgers were highly skilled itinerant wood-turners, who worked in the beech woods of the Chiltern Hills.^[2][7] The term and trade also spread to Ireland and Scotland.

The term was always confined to High Wycombe until the recent (post 1980) revival of pole lathe turning with many chairmakers around the country now calling themselves bodgers. Chairs were made and parts turned in all parts of the UK before the semi industrialised production of High Wycombe. As well recorded in Cotton the English Regional Chair

Bodgers also sold their waste product as kindling, or as exceptionally durable woven-baskets.^[8]

Chair bodgers were one of three types of craftsmen associated with the making of the traditional country "Windsor Chair" chairs.^[9]

In the early years of the 20th century, there were about 30 chair bodgers scattered within the vicinity of the High Wycombe furniture trade. Although there was great camaraderie and kinship amongst this close community nevertheless a professional eye was kept upon what each other was doing. Most important to the bodger was which company did his competitors supply and at what price. Bodger Samuel Rockall's account book for 1908 shows he was receiving 19 shillings (95p) for a gross (144 units) of plain legs including stretchers. With three stretchers to a set of four legs this amounted to 242 turnings in total.^[10][11]

Another account states: "a bodger worked ten hours a day, six concurrent days a week, in all weathers, only earning thirty shillings a week" (150 pence=£1-10 s).^[12]

The rate of production was surprisingly high. According to Ronald Goodearl, who photographed one of the last professional bodgers Alec and Owen Dean in the late 1940s, recalled they had stated "each man would turn out 144 parts per day (one gross) including legs and stretchers- this would include cutting up the green wood, and turning it into blanks, then turning it".^[13]

Bodger's method

Traditionally, a bodger would buy a stand of trees from a local estate, set up a place to live (his bodger's hovel) and work close to trees.^[9]

After felling a suitable tree, the bodger would cut the tree into billets, approximately the length of a chair leg. The billet would then be split using a wedge. Using the side-axe, he would roughly shape the pieces into chair legs. The drawknife would farther refine the leg shape. The finishing stage was turning the leg with the pole lathe (the pole lathe was made on site). Once the leg or stretchers were finished, being of "green" wood, they required seasoning. Chair legs would be stored in piles until the quota (usually a gross of legs and the requisite stretchers) was complete. The bodger would then take their work to one of the large chair-making centres. The largest consumer of the day was the High Wycombe Windsor chair industry.

Notable bodgers

Samuel Rockall learnt the trade from his uncle, Jimmy Rockall. At the age of 61, Samuel was almost the last of the living chair bodgers.^[14] Rockall’s bodging tradition was captured on film shortly after he died in 1962. His two sons helped in the reconstruction of his working life in the woods and his workshop. The colour film was produced by the furniture manufacturer Parker Knoll and follows the complete process using Sam’s own tools and equipment. A film copy is available at the Wycombe Museum.^[10]

English slang

In contemporary British English slang, bodging can also refer to a job done of necessity using whatever tools and materials come to hand and which, whilst not necessarily elegant, is nevertheless serviceable. Bodged should not be confused with a "botched" job: a poor, incompetent or shoddy example of work, deriving from the mediaeval word "botch" – a bruise or carbuncle, typically in the field of DIY, though often in fashion magazines to describe poorly executed cosmetic surgery. A "bodge", like its cognates kludge and fudge, is serviceable: a "botched" job most certainly is not – but a total failure.

See also

• Chair
• Artisan

References

External links

• The Association of Polelathe Turners and Greenwood Workers
• The Artful Bodger
• Green Wood Work
• Guide to Bodging
• The Chair Bodgers of Buckinghamshire
• The last Chiltern chair bodger photographic memorial of Owen Dean and his workshop