Beam compass

From Wikipedia, the free encyclopedia

A beam compass is a compass with a beam and sliding sockets or cursors for drawing and dividing circles larger than those made by a regular pair of compasses.^[1] The instrument can be as a whole, or made on the spot with individual sockets (called trammel points) and any suitable beam.

Trammel points

Trammels or trammel points are the sockets or cursors that, together with the beam, make up a beam compass. Their relatively small size makes them easy to store or transport. They consist of two separate metal pieces (approx. 2.5" × 5" × 1/2") that are usually connected by a piece of wood, The wood timber is not included in the purchase of the trammel points. It can be ripped on a table saw. A lumber yard or woodworking store should have a piece readily available to fit the opening also, metal, or pipe. They work like a scratch awl.

Use

As for any compass, there are two uses.

Scribing a circle

sharp point used to score a fine line in the birch plywood connected to each other by a piece of 3/4" X 3/8" mahogany

The beam compass is used to scribe a circle. The radius can be adjusted by sliding the metal across the wood (beam) and locking it by turning a knob at the desired location. The threaded machine rod is similar to the bolt. The only limitation is the rigidity of the wood being used. Longer pieces tend to get floppier depending on the species of wood used. Metal can be used as an alternative but also has length limitations. Trammel points score a precise cut out line with the sharp point of the rod. When the circular knob is turned, it micro adjusts the radius of the circle. The spring locks the mechanism at the precise desired location. Turning clockwise decreases the radius while turning counterclockwise increases the radius slightly.

Transferring measurements

A beam compass can also be used to make a series of repetitious measurements in a precise manner. Each point is rotated 180° and this process is repeated until the desired measurement is reached. The indentation created by the sharp point of the trammel is easily seen and makes a precise point to reference to the next location.

Variants

Circle cutter used to score drywall.

The circle cutter is a basic variation of the beam compass. There are many types of circle cutters. This cutter is used primarily to score a circular pattern in the drywall to fit over recessed lighting in the ceiling. The tool consists of a square shank with a sliding pivot that is locked into the desired location with a turn knob. The shank is graduated into 16 units and each unit is further divided into increments of one quarter. One end of the shank has a fixed cutter wheel that scores a fine line in the drywall.

References

Notes

↑ This article incorporates text from a publication now in the public domain: Chambers, Ephraim, ed. (1728). "Beam-Compasses". Cyclopaedia, or an Universal Dictionary of Arts and Sciences (first ed.). James and John Knapton, et al.

Bibliography

McMaster-Carr catalog (114th ed.), McMaster-Carr .

Metalworking

Tools

Cutting machines	Bandsaw Cold saw Laser Miter saw Plasma Water jet cutter

Cutting tools	Broach Burr Chisel Counterbore Countersink End mill File Hand scraper Milling cutter Nibbler Reamer Shears Tipped tool Tool bit

Forming tools	Brake Die English wheel Hydraulic press Machine press Punch press Screw press Stamping press

Hand tools	Clamp Combination square Drift pin Hacksaw Hammer Hand scraper Machinist square Needlegun scaler Piercing saw Pliers Punch Scriber Tap and die Tongs Vise Workbench Wrench

Machine tooling	Angle plate Chuck Collet Fixture Indexing head Jig Lathe center Machine taper Magnetic base Mandrel Rotary table Wiggler

Measuring instruments	Bore gauge Caliper Center gauge Dial indicator Engineer's blue Engineer's spirit level Feeler gauge Gauge Gauge block Go/no go gauge Height gauge Machinist square Marking blue Marking gauge Marking out Micrometer Optical comparator Radius gauge Ruler Sine bar Straightedge Surface plate Tape measure Thread pitch gauge Vernier scale

Smithing tools	Anvil Forge Fuller Hardy tools Pritchel Steam hammer Swage block Trip hammer

v t e Measuring and alignment tools

architect's scale beam compass caliper chalk box combination square compass coordinate-measuring machine drafting machine engineer's scale flat spline jig laser level laser line level laser measuring tool lesbian rule micrometer plumb-bob protractor ruler set square sliding T bevel spirit level steel square stencil straightedge T-square tape measure theodolite vise weighing scale yardstick

Types of tools Cleaning Cutting and abrasive Forestry and gardening Hand Machine and metalworking Measuring and alignment Power

This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.