Baldwin 4-8+8-4-750/8-DE

From Wikipedia, the free encyclopedia
Baldwin 4-8+8-4 750/8 DE
Specifications
Power type Diesel-electric
Builder Baldwin Locomotive Works
Serial number BLW 64639, also 4-8+8-4 750/8 DE 1
Model 4-8+8-4 750/8 DE
Build date 1943
Total produced 1
AAR wheel arr. 2-D+D-2
UIC classification (2′Do)+(Do2′)
Gauge 4 ft 8 12 in (1,435 mm)
Length 91 ft 6 in (27.89 m)
Locomotive weight 685,000 pounds (311,000 kg)
Fuel capacity 2,850 US gal (10,800 l; 2,370 imp gal)]
Prime mover Eight 408 (but only four installed)
Engine type Four-stroke diesel
Aspiration Supercharger
Generator DC generator
Traction motors DC traction motors
Cylinders V8 (×8 planned)
Transmission Electric
Top speed 120 mph (190 km/h)
Power output 6,000 hp (4.47 MW) (with all 8 engines installed)
Tractive effort 45,000 lbf (200.17 kN) at 39 mph (63 km/h)
Locomotive brake Straight air
Train brakes Air
Career
Locale North America

The Baldwin 4-8+8-4 750/8 DE1 was the Baldwin Locomotive Works' first attempt at road diesel locomotive. The trucks were configured in a 2-D+D-2 wheel arrangement. Only a single test unit was built.

In 1943 Baldwin built an experimental "Centipede" as a demonstrator unit, which was assigned road #6000. The uniquely styled unit, with its upright, aggressive prow, was to be powered with eight model 408 V8 diesel engines (which would have produced 6,000 horsepower (4,500 kW)), though only four were actually installed. The locomotive's running gear design reflected Baldwin steam and electric locomotive practice. The carbody rode on two massive articulated cast steel half-frames cast by General Steel Castings, linked at the middle with a hinged joint. Unpowered four-wheel trucks at each end guided the locomotive through curves for stability at speed.

The locomotive utilized unique "power packages", each consisting of an engine, generator, radiator, electrical cabinet, and other auxiliaries. These power packages could be changed out in as little as 20 minutes. While the locomotive was designed to carry 8 of these power packages, only 4 were ever installed. Each engine powered a single axle of the locomotive.

The lone unit was dismantled soon after production, and its running gear was used for the one of a kind prototype #4500 Seaboard Air Line 3,000 horsepower (2,200 kW) "Centipede".

References

  • Kirkland, John F. (1994). The Diesel Builders (Volume 3, Baldwin Locomotive Works). Interurban Press. ISBN 0-916374-93-9. 
  • Pinkepank, Jerry A. (1973). The Second Diesel Spotter's Guide. Kalmbach Publishing Co. ISBN 0-89024-026-4. 
  • Dolzall, Gary W. & Dolzall, Stephen F. (1984). Diesels From Eddystone: The Story of Baldwin Diesel Locomotives. Kalmbach Publishing Co. ISBN 0-89024-052-3. 


This article is issued from Wikipedia. The text is available under the Creative Commons Attribution/Share Alike; additional terms may apply for the media files.