BMW M40

The BMW M40 is an inline-four SOHC piston engine which replaced the M10 and was produced from 1987-1995. It uses a camshaft belt like the 6 cylinder M20. Displacement ranges from 1.6 L to 1.8 L. The direct successor was the M43, which uses a chain driven camshaft, however in 1989 BMW also released the M42, a higher performance DOHC four-cylinder engine with the same block dimensions as the 1.8 litre M40.

The M40 engine uses Motronic 1.3 fuel injection system, has hydraulic tappets and are known for ticking over time, this is usually due to wear from oil starvation and poor maintenance, also M40 engine is more susceptible to lobe wear than any other E30 engine, usually caused by a blocked oil spray bar and a poor combination of materials. When the cam is worn, the engine won't rev high and the only solution is to replace it.

M40B16

The M40B16 is a 1.6 L (1,596 cc) version of the M40 producing 102 hp (76 kW) and 105 lb·ft (142 N·m) of torque.^[1] The E30 version uses Bosch Motronic 1.3 fuel injection, while the E36 version uses Motronic 1.7.^[2]

Applications:

• 1988–1994 E30 316i
• 1990–1994 E36 316i

M40B18

The M40B18 is a 1.8 L (1,796 cc) version of the M40 producing 113 hp (84 kW) and 120 lb·ft (160 N·m) of torque.^[2] Like the M40B16, the fuel injection system is Bosch Motronic 1.3 for the E30 versions and Motronic 1.7 for the E36.

Applications:

• 1987–1994 E30 318i
• 1988–1994 E34 518i
• 1992–1993 E36 318i

References

See also

• List of BMW engines
• BMW M42
• BMW M43