Thermal paper is a special fine paper that is coated with a chemical that changes color when exposed to heat. It is used in thermal printers and particularly in inexpensive or lightweight devices such as adding machines, cash registers, and credit card terminals.
The surface of the paper is coated with a solid-state mixture of a dye and a suitable matrix; a combination of a fluoran leuco dye, octadecylphosphonic acids as an example. When the matrix is heated above its melting point, the dye reacts with the acid, shifts to its colored form, and the changed form is then conserved in metastable state when the matrix solidifies back quickly enough.
Typically the coating will turn black when heated. But coatings that turn blue or red are sometimes used. While an open heat source such as a flame can discolor the paper, a fingernail swiped quickly across the paper will also generate enough heat from friction to produce a mark on such paper.
Most direct thermal papers require a protective topcoating to:
Contents |
The earliest direct thermal papers were developed by NCR Corporation (using dye chemistry) and 3M (using metallic salts). The NCR technology became the market leader over time, although the image would fade rather rapidly compared with the much more expensive, but durable 3M technology.
Texas Instruments invented the thermal print head in 1965, and the Silent 700, a computer terminal with a thermal printer, was put on market in 1969. The Silent 700 was the first thermal print system that printed on thermal paper. During the 1970s, Hewlett Packard integrated thermal paper printers into the design of its HP9800 series desktop computers, and integrated into the top of 2600-series CRT terminals as well as in plotters.
In the 1970s and early 1980s, Japanese producers (such as Ricoh, Jujo, and Kanzaki) using similar dye-based chemistry formed partnerships with barcode printer manufacturers (such as TEC, Sato, and others) and entered the emerging global bar code industry, primarily in supermarkets. U.S. producers such as Appleton (NCR's licensee), Nashua Corporation, Graphic Controls, and others fought to gain market share. Leading pressure-sensitive label producers such as Avery Dennison became major consumers of direct thermal paper for label applications.
In the late 1980s and early 1990s, thermal transfer, laser printing, electrophotography, and, to a lesser extent, ink jet printing began to take away industrial and warehouse barcode applications due to better durability. Direct thermal made a strong comeback with point of sale receipts (gasoline pumps, cash registers, rental car receipts, etc.).
During 1998, Nintendo used thermal paper technology for their Game Boy Printer.
In 2006, NCR Corporation's Systemedia division introduced two-sided thermal printing technology, called "2ST"[1]
Some thermal papers are coated with Bisphenol A (BPA), a chemical considered to be an endocrine disruptor. This material can contaminate recycled paper [1][2]. BPA can transfer readily to skin in small amounts:
When taking hold of a receipt consisting of thermal printing paper for 5 seconds, roughly 1 μg BPA (0.2–6 μg) was transferred to the forefinger and the middle finger if the skin was rather dry and about ten times more if these fingers were wet or very greasy. …exposure of a person repeatedly touching thermal printer paper for 10 h/day, such as at a cash register, could reach 71 microg/day, which is 42 times less than the present tolerable daily intake (TDI).[3]