Gong

A gong (Malay: gong) is an East and South East Asian musical percussion instrument that takes the form of a flat metal disc which is hit with a mallet.

Gongs are broadly of three types. Suspended gongs are more or less flat, circular discs of metal suspended vertically by means of a cord passed through holes near to the top rim. Bossed or nipple gongs have a raised centre boss and are often suspended and played horizontally. Bowl gongs are bowl-shaped, and rest on cushions and belong more to bells than gongs. Gongs are made mainly from bronze or brass but there are many other alloys in use.

Gongs produce two distinct types of sound. A gong with a substantially flat surface vibrates in multiple modes, giving a "crash" rather than a tuned note. This category of gong is sometimes called a tam-tam to distinguish it from the bossed gongs that give a tuned note. In Indonesian gamelan ensembles, some bossed gongs are deliberately made to generate in addition a beat note in the range from about 1 to 5 Hz. The use of the term "gong" for both these types of instrument is common.

Contents

Types of gong

Suspended gongs are played with beaters and are of two main types: flat faced discs either with or without a turned edge, and gongs with a raised center boss. In general, the larger the gong, the larger and softer the beater. In Western symphonic music the flat faced gongs are generally referred to as tam-tams to distinguish them from their bossed counterparts, although the term "gong" is correct to use for either type. The gong has been an ancient Chinese custom for many eras. They were first used to signal peasant workers in from the fields as some gongs are loud enough to hear from up to 50 miles away. In Japan, they are used to start the beginning of sumo wrestling contests.

Large flat gongs may be 'primed' by lightly hitting them before the main stroke, greatly enhancing the sound and causing the instrument to "speak" sooner, with a shorter delay for the sound to "bloom". Keeping this priming stroke inaudible calls for a great deal of skill. The smallest suspended gongs are played with bamboo sticks, or even western-style drumsticks. Contemporary & avant-garde music, where different sounds are sought, will often use friction mallets (producing squeals & harmonics), bass bows (producing long tones and high overtones), and various striking implements (wood/plastic/metal) to produce the desired tones.

Rock gongs are large stones struck with smaller stones to create a metallic resonating sound.

Traditional suspended gongs

Chau gongs (Tam-tam)

By far the most familiar to most Westerners is the chau gong or bullseye gong. Large chau gongs, called tam-tams (not to be confused with tom-tom drums)[1] have become part of the symphony orchestra. Sometimes a chau gong is referred to as a Chinese gong, but in fact it is only one of many types of suspended gongs that are associated with China.

The chau gong is made of copper-based alloy, bronze or brass. It is almost flat except for the rim, which is turned up to make a shallow cylinder. On a 10" gong, for example, the rim extends about a half an inch perpendicular to the gong surface. The main surface is slightly concave when viewed from the direction to which the rim is turned. The centre spot and the rim of a chau gong are left coated on both sides with the black copper oxide that forms during the manufacture of the gong, the rest of the gong is polished to remove this coating. Chau gongs range in size from 7" to 80" in diameter.

The earliest Chau gong is from a tomb discovered at the Guixian site in the Guangxi Zhuang Autonomous Region of China. It dates from the early Western Han Dynasty. They were known for their very intense and spiritual drumming in rituals and tribal meetings.

Traditionally, chau gongs were used to clear the way for important officials and processions, much like a police siren today. Sometimes the number of strokes on the gong was used to indicate the seniority of the official. In this way, two officials meeting unexpectedly on the road would know before the meeting which of them should bow down before the other.

Uses of gongs in the symphony orchestra

Gioachino Rossini, Vincenzo Bellini and Richard Wagner were some of the first composers[2] to use the tam-tam in their works; Rossini in the final of act 3 of Armida (1817),[3] Bellini in Norma (1831) and Wagner in Rienzi (1842). Within a few decades the tam-tam became an important member of the percussion section of a modern symphony orchestra. Fine examples of its use are demonstrated in the symphonies of Gustav Mahler, Dmitri Shostakovich and, to a lesser extent, Sergei Rachmaninov. Karlheinz Stockhausen used a 60" Paiste tam-tam in his Momente. Puccini as mentioned before used both Gongs and Tam-tams in his Operas.

Big Nipple Gong

A nipple gong has a central raised boss or nipple, often made of a different metal to the rest of the gong. They have a clear resonant tone with less shimmer than other gongs, and two distinct sounds depending on whether they are struck on the boss or next to it. They most often are tuned to various pitches.

Nipple gongs range in size from 6" to 14" or larger. Sets of smaller, tuned nipple gongs can be used to play a tune.

Nipple gongs are used in Chinese temples for worship.

In Indonesian gamelan ensembles, instruments that are organologically gongs come in various sizes with different functions and different names. For example, in the central Javanese gamelan, the largest gong is called gong ageng, ranges in size up to 1 meter in diameter, has the deepest pitch and is played least often; the next smaller gong is the gong suwukan or siyem, has a slightly higher pitch and replaces the gong ageng in pieces where gong strokes are close together; the kempul is smaller still, has a higher pitch, and is played more frequently. The gong ageng and some gong suwukan have a beat note.

Opera gongs

An essential part of the orchestra for Chinese opera is a pair of gongs, the larger with a descending tone, the smaller with a rising tone. The larger gong is used to announce the entrance of major players, of men, and to identify points of drama and consequence. The smaller gong is used to announce the entry of lesser players, of women, and to identify points of humour.

Opera gongs range in size from 7" to 12", with the larger of a pair one or two inches larger than the smaller.

Pasi gongs

A Pasi gong is a medium-size gong 12" to 15" in size, with a crashing sound. It is used traditionally to announce the start of a performance, play or magic. Construction varies, some having nipples and some not, so this type is named more for its function than for its structure or even its sound.

Pasi gongs without nipples have found favour with adventurous middle-of-the-road kit drummers.

Tiger gong

A tiger gong is a slightly descending or less commonly ascending gong, larger than an opera gong and with a less pronounced pitch shift. Most commonly 15" but available down to 8".

Shueng Kwong

A Sheng Kwong gong is a medium to large gong with a sharp staccato sound.

Wind gong

Wind gongs (also known as Feng or Lion Gongs) are flat bronze discs, with little fundamental pitch, heavy tuned overtones, and long sustain. They are most commonly made of B20 bronze, but can also be made of M63 brass or NS12 nickel-silver. Traditionally, a wind gong is played with a large soft mallet, which gives it a roaring crash to match their namesake. They are lathed on both sides and are medium to large in size, typically 15" to 22" but sizes from 7" to 40" are available. The 22" size is most popular due to its portability and large sound. They are commonly used by drum-kit drummers in rock music.

Played with a nylon tip drumstick they sound rather like the coil chimes in a mantle clock. Some have holes in the centre, but they are mounted like all suspended gongs by other holes near the rim. The smaller sizes (7"-12") have a more bell-like tone due to their thickness and small diameter.

Sculptural gongs

Sculptural gongs (also known as Gong Sculptures) are gongs which serve the dual purpose of being a musical instrument and a work of visual art. They are generally not disc shaped, but instead take more complex, even abstract forms. Sculptural gongs were pioneered in the early 1990s by Welsh percussionist and metal crafter, Steve Hubback, who was partially inspired by the work of the French Sound Sculptors, Francois and Bernard Baschet.

Hubback's works have been used by many musicians including solo percussionist Dame Evelyn Glennie and rock drummer Carl Palmer.

English gong and cymbal maker, Matt Nolan, partially inspired by the work of Hubback, also creates Sculptural gongs of his own design or to private commission.

Other uses

In older Javanese usage and in modern Balinese usage, gong is used to identify an ensemble of instruments. In contemporary central Javanese usage, the term gamelan is preferred and the term gong is reserved for the gong ageng, the largest instrument of the type, or for surrogate instruments such as the gong komodong or gong bumbu (blown gong) which fill the same musical function in ensembles lacking the large gong. In Balinese usage, gong refers to Gamelan Gong Kebyar.

Gong manufacturers

Besides many traditional and centuries old manufacturers in places such as China, Tibet, Burma, Korea, Indonesia, and the Philippines, since the 20th Century gongs have also been made in Europe and America.

Paiste are the largest non-Asian manufacturer of gongs. This Swiss company of Estonian lineage makes gongs at their German factory. Also in Europe, Italian company UFIP make a range of gongs at their factory in Pistoia.

In North-America, Sabian make a small number of gongs and Zildjian sell Zildjian-branded gongs which have in the past been made by Zildjian, but current production looks to be Chinese in origin.

Some of the smaller Turkish cymbal companies have also been seen to dabble in gongs but very much as a side-line to their core business of hand-hammered cymbals.

More unusual and innovative types of gong have been made in recent years by independent gong smiths, most notably Steve Hubback, Michael Paiste (now independent of the family business) and Matt Nolan.

Gongs - general

A gong (Chinese: 鑼; pinyin: luó; Malay language or Javanese language: gong) is a percussion sonorous or musical instrument of Chinese origin and manufacture, made in the form of a broad thin disk with a deep rim, that has spread to Southeast Asia - a type of flat bell.

Gongs vary in diameter from about 20 to 40 inches, and they are made of bronze containing a maximum of 22 parts of tin to 78 of copper; but in many cases the proportion of tin is considerably less. Such an alloy, when cast and allowed to cool slowly, is excessively brittle, but it can be tempered and annealed in a peculiar manner. If suddenly cooled from a cherry-red heat, the alloy becomes so soft that it can be hammered and worked on the lathe, and afterwards it may be hardened by re-heating and cooling it slowly. In these properties it will be observed, the alloy behaves in a manner exactly opposite to steel, and the Chinese avail themselves of the known peculiarities for preparing the thin sheets of which gongs are made. They cool their castings of bronze in water, and after hammering out the alloy in the soft state, harden the finished gongs by heating them to a cherry-red and allowing them to cool slowly. These properties of the alloy long remained a secret, said to have been first discovered in Europe by Jean Pierre Joseph d'Arcet at the beginning of the 19th century. Riche and Champion are said to have succeeded in producing tam-tams having all the qualities and timbre of the Chinese instruments. The composition of the alloy of bronze used for making gongs is stated to be as follows: Copper, 76.52; Tin, 22.43; Lead, 0.26; Zinc, 0.23; Iron, 0.81. The gong is beaten with a round, hard, leather-covered pad, fitted on a short stick or handle. It emits a peculiarly sonorous sound, its complex vibrations bursting into a wave-like succession of tones, sometimes shrill, sometimes deep. In China and Japan it is used in religious ceremonies, state processions, marriages and other festivals; and it is said that the Chinese can modify its tone variously by particular ways of striking the disk.

The gong has been effectively used in the orchestra to intensify the impression of fear and horror in melodramatic scenes. The tam-tam was first introduced into a western orchestra by François Joseph Gossec in the funeral march composed at the death of Mirabeau in 1791. Gaspare Spontini used it in La Vestale (1807), in the finale of Act II, an impressive scene in which the high pontiff pronounces the anathema on the faithless vestal. It was also used in the funeral music played when the remains of Napoleon were brought back to France in 1840. Meyerbeer made use of the instrument in the scene of the resurrection of the three nuns in Robert le diable. Four tam-tams are now used at Bayreuth in Parsifal to reinforce the bell instruments, although there is no indication given in the score. The tam-tam has been treated from its ethnographical side by Franz Heger. In more modern music, the tam-tam has been used by composers such as Karlheinz Stockhausen in Mikrophonie I (1964–65) and by George Crumb. Crumb expanded the timbral range of the tam-tam by giving performance directions (in Makrokosmos III: Music For A Summer Evening, composed in 1974) such as using a "well-rosined contrabass bow" to bow the tam-tam, producing an eerie harmonic sound, while Stockhausen exploited amplification (via hand-held microphones) of a wide range of scraping, tapping, rubbing, and beating techniques using unconventional implements (plastic dishes, egg timer, cardboard tubes, etc.). Gongs can also be immersed into a tub of water after being struck. This is called "water gong" and is called for in several orchestral pieces.

Signal gongs

Railcar mounted

The signal bell mounted on a tram, streetcar, cable car or light rail train is known as a gong. It is a bowl-shaped bell typically mounted on the front of the leading car. It is sounded to act as a warning in areas where whistles and horns are prohibited. The "Clang" of the trolley refers to the sound made by the warning gong. In the Tram controls, the gong is operated by a foot lever. A smaller gong with a bell pull is mounted by the rear door of these railcars. It operated by the conductor to notify the motorman that it is safe to proceed.

Vehicle mounted

In the Commonwealth, emergency vehicles were fitted with electric, manual, or vacuum operated bell gongs in the time before Martin's horns became available or rotary sirens came into use.

Rail crossing

A railroad crossing with a flashing traffic signal or wigwag will also typically have a warning bell, also known as a gong. The gong is struck by an electric-powered hammer to give motorists and pedestrians an audible warning of an oncoming train. Many railroad crossing gongs are now being replaced by electronic devices with no moving parts.

Boxing (sport)

A bowl-shaped center mounted gong is standard equipment in a boxing ring and is known as a gong. It is struck with a hammer to signal the start and end of each round.

Theater

Electromechanical, electromagnetic or electronic devices producing sound of gong have been installed in Czech theaters to gather audience from lounge to auditorium before show begins or proceeds after interlude.[4][5][6]

Time signal

German radio uses the gong sound to mark the exact time.[7]

Gongs in popular culture

List of gongs

See also

References

  1. ^ Morris Goldberg in his Modern School... Guide for The Artist Percussionist (Chappell & Co., Inc., New York, New York, 1955), says that "in modern symphony orchestra names gong and tam-tam mean the same thing, that in scholarly circles, tam-tam is considered to be a slang expression taken from an African word meaning drum", later associated with gongs of indefinite pitch, and as such was adopted by virtually all composers using the term and thus is used now interchangeably.
  2. ^ Although in modern, 20th century and beyond, performances sometimes conductors were adapting tam-tam in orchestra for the performances of Gluck's Alceste and Orfeo ed Euridice (as ones used in the Metropolitan Opera historical productions, there is no trace of it in original scores of Gluck himself, so it must be considered an effect additions rather than the wish of the composer himself.
  3. ^ Instrumentation used in Armida by Rossini
  4. ^ Palantir
  5. ^ Webmagazín Rozhledna .::. nezávislý kulturně-společenský deník
  6. ^ Město Rumburk - oficiální stránky města
  7. ^ http://de.wikipedia.org/wiki/Gong

External links