Tin dioxide | |
---|---|
Tin dioxide |
|
Other names
Stannic oxide |
|
Identifiers | |
CAS number | 18282-10-5 , 13472-47-4 (hydrate) |
EC number | 242-159-0 |
RTECS number | XQ4000000 |
Properties | |
Molecular formula | SnO2 |
Molar mass | 150.71 g/mol |
Appearance | white powder |
Density | 6.95 g/cm3 |
Melting point |
1630 °C |
Boiling point |
1800–1900 °C |
Solubility in water | insoluble |
Refractive index (nD) | 2.006 |
Structure | |
Crystal structure | Rutile (tetragonal), tP6 |
Space group | P42/mnm, No. 136 |
Coordination geometry |
Octahedral (SnIV); trigonal planar (O2–) |
Hazards | |
MSDS | ICSC 0954 |
EU Index | Not listed |
NFPA 704 |
0
2
0
|
Flash point | Non-flammable |
Related compounds | |
Other anions | Tin disulfide |
Other cations | Carbon dioxide Silicon dioxide Titanium dioxide Germanium dioxide Zirconium dioxide Hafnium dioxide Lead dioxide |
Related tin oxides | Tin(II) oxide |
(verify) (what is: / ?) Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa) |
|
Infobox references |
Tin dioxide is the inorganic compound with the formula SnO2. The mineral form of SnO2 is called cassiterite, and this is the main ore of tin.[1] With many other names (see infobox), this oxide of tin is the most important raw material in tin chemistry. This colourless, diamagnetic solid is amphoteric.
Contents |
It crystallises with the rutile structure, wherein the tin atoms are six coordinate and the oxygen atoms three coordinate.[1] SnO2 is usually regarded as an oxygen-deficient n-type semiconductor.[2] Hydrous forms of SnO2 have been described in the past as stannic acids, although such materials appear to be hydrated particles of SnO2 where the composition reflects the particle size.[3]
Tin dioxide occurs naturally but is purified by reduction to the metal followed by burning tin in air.[3] Annual production is in the range of 10 kilotons.[3] SnO2 is reduced industrially to the metal with carbon in a reverbatory furnace at 1200-1300 °C.[4]
Although SnO2 is insoluble in water, it is an amphoteric oxide, although cassiterite ore has been described as difficult to dissolve in acids and alkalis.[5] "Stannic acid" refers to hydrated tin dioxide, SnO2, which is also called "stannic hydroxide."
Tin oxides dissolve in acids. Halogen acids attack SnO2 to give hexahalostannates,[6] such as [SnI6]2-. One report describes reacting a sample in refluxing HI for many hours.[7]
Similarly, SnO2 dissolves in sulfuric acid to give the sulfate:[3]
SnO2 dissolves in strong base to give "stannates," with the nominal formula Na2SnO3.[3] Dissolving the solidified SnO2/NaOH melt in water gives Na2[Sn(OH)6]2, "preparing salt," which is used in the dye industry.[3]
In conjunction with vanadium oxide, it is used as a catalyst for the oxidation of aromatic compounds in the synthesis of carboxylic acids and acid anhydrides.[1]
Tin dioxide has long been used as an opacifier and as a white colorant in ceramic glazes.[8] Its use has been particular common in glazes for earthenware, sanitaryware and wall tiles; see the articles tin-glazing and Tin-glazed pottery. Tin oxide remains in suspension in vitreous matrix of the fired glazes, and, with its high refractive index being sufficiently different from the matrix, light is scattered, and hence increases the opacity of the glaze. The degree of dissolution increases with the firing temperature, and hence the extent of opacity diminishes.[9] Although dependant on the other constituents the solubility of tin oxide in glaze melts is generally low. Its solubility is increased by Na2O, K2O and B2O3, and reduced by CaO, BaO, ZnO, Al2O3, and to a limited extent PbO.[10]
SnO2 wires are commonly used as the detecting element in carbon monoxide detectors.
SnO2 coatings can be applied using chemical vapor deposition, vapour deposition techniques that employ SnCl4[1] or organotin trihalides[11] e.g. butyltin trichloride as the volatile agent. This technique is used to coat glass bottles with a thin (<0.1 μm) layer of SnO2, which helps to adhere a subsequent, protective polymer coating such as polyethylene to the glass.[1] Thicker layers doped with Sb or F ions are electrically conducting and used in electroluminescent devices.[1] SnO2 has been used as pigment in the manufacture of glasses, enamels and ceramic glazes. Pure SnO2 gives a milky white colour; other colours are achieved when mixed with other metallic oxides e.g. V2O5 yellow; Cr2O3 pink; and Sb2O5 grey blue.[3] SnO2 has been used as a polishing powder[3] and is sometimes known as "putty powder",[5] SnO2 is used in sensors of combustible gases. In these the sensor area is heated to a constant temperature (few hundred °C) and in the presence of a combustible gas the electrical resistivity drops.[12] Doping with various compounds has been investigated (e.g. with CuO [13]). Doping with cobalt and manganese, gives a material that can be used in e.g. high voltage varistors.[14] Tin dioxide can be doped into the oxides of iron or manganese.[15]
|