Peridynamics

Peridynamics is a formulation of continuum mechanics that is oriented toward deformations with discontinuities, especially fractures.

Contents

Purpose of peridynamics

The peridynamic theory is based on integral equations, in contrast with the classical theory of continuum mechanics, which is based on partial differential equations. Since partial derivatives do not exist on crack surfaces and other singularities, the classical equations of continuum mechanics cannot be applied directly when such features are present in a deformation. The integral equations of the peridynamic theory can be applied directly, because they do not require partial derivatives.

The ability to apply the same equations directly at all points in a mathematical model of a deforming structure helps the peridynamic approach avoid the need for the special techniques of fracture mechanics. For example, in peridynamics, there is no need for a separate crack growth law based on a stress intensity factor.

Definition and basic terminology

The basic equation of peridynamics is the following equation of motion:

\rho(x)\ddot u(x,t)=\int_R f(u(x',t)-u(x,t),x'-x,x)dV_{x'} %2B b(x,t)

where x is a point in a body R, t is time, u is the displacement vector field, and \rho is the mass density in the undeformed body. x' is a dummy variable of integration.

The vector valued function f is the force density that x' exerts on x. This force density depends on the relative displacement and relative position vectors between x' and x. The dimensions of f are force per volume squared. The function f is called the "pairwise force function" and contains all the constitutive (material-dependent) properties. It describes how the internal forces depend on the deformation.

The interaction between any x and x' is called a "bond." The physical mechanism in this interaction need not be specified. It is usually assumed that f vanishes whenever x' is outside a neighborhood of x (in the undeformed configuration) called the horizon.

The term "peridynamic," an adjective, was proposed in the year 2000 and comes from the prefix peri, which means all around, near, or surrounding; and the root dyna, which means force or power. The term "peridynamics," a noun, is a shortened form of the phrase peridynamic model of solid mechanics.

Pairwise force functions

Using the abbreviated notation u=u(x,t) and u'=u(x',t) Newton's third law places the following restriction on f:


\displaystyle f(u-u', x-x', x') = -f(u'-u, x'-x, x)

for any x, x', u, u'. This equation states that the force density vector that x exerts on x' equals minus the force density vector that x' exerts on x. Balance of angular momentum requires that f be parallel to the vector connecting the deformed position of x to the deformed position of x':

\displaystyle ((x'%2Bu')-(x%2Bu))\times f(u'-u, x'-x, x)=0.

A pairwise force function is specified by a graph of |f| versus bond elongation e, defined by

\displaystyle e=|(x'%2Bu')-(x%2Bu)|-|x'-x|.

A schematic of a pairwise force function for the bond connecting two typical points is shown in the following figure:

Damage

Damage is incorporated in the pairwise force function by allowing bonds to break when their elongation exceeds some prescribed value. After a bond breaks, it no longer sustains any force, and the endpoints are effectively disconnected from each other. When a bond breaks, the force it was carrying is redistributed to other bonds that have not yet broken. This increased load makes it more likely that these other bonds will break. The process of bond breakage and load redistribution, leading to further breakage, is how cracks grow in the peridynamic model.

Peridynamic states

The theory described above assumes that each peridynamic bond responds independently of all the others. This is an oversimplification for most materials and leads to restrictions on the types of materials that can be modeled. In particular, this assumption implies that any isotropic linear elastic solid is restricted to a Poisson ratio of 1/4.

To address this lack of generality, the idea of "peridynamic states" was introduced. This allows the force density in each bond to depend on the stretches in all the bonds connected to its endpoints, in addition to its own stretch. For example, the force in a bond could depend on the net volume changes at the endpoints. The effect of this volume change, relative to the effect of the bond stretch, determines the Poisson ratio. With peridynamic states, any material that can be modeled within the standard theory of continuum mechanics can be modeled as a peridynamic material, while retaining the advantages of the peridynamic theory for fracture.

See also

Further reading

External links