A mechanical pencil (U.S. English) or a propelling pencil (UK English)[1][2][3] is a pencil with a replaceable and mechanically extendable solid pigment core called a lead ( /ˈlɛd/). It is designed such that the lead can be extended as its point is worn away. The lead is not bonded to the outer casing and is usually graphite based, though colored pigments and other solid substances are also used.
Mechanical pencils are often designed and used to provide lines of constant thickness without requiring sharpening, making them well suited to applications like technical drawing and fine-point or general writing. They have also, relatively unusually, been used, either with conventional pencils,[4] or by themselves, for fine-art drawing.[5]
Contents |
The earliest extant example of a mechanical pencil has been found aboard the wreckage of HMS Pandora, which sank in 1791.[6]
The first patent for a refillable pencil with lead-propelling mechanism was issued to Sampson Mordan and John Isaac Hawkins in Britain in 1822. After buying out Hawkins' patent rights, Mordan entered into a business partnership with Gabriel Riddle from 1823 to 1837. The earliest Mordan pencils are thus hallmarked SMGR.[7][8] After 1837, Sampson Mordan ended the partnership with Riddle and continued to manufacture pencils as "S.MORDAN & CO". His company continued to manufacture pencils and a wide range of silver objects until World War II, when the factory was bombed.
Between 1822 and 1874, more than 160 patents were registered pertaining to a variety of improvements to mechanical pencils. The first spring-loaded mechanical pencil was patented in 1877 and a twist-feed mechanism was developed in 1895. The 0.9 mm lead was introduced in 1938, and later it was followed by 0.3, 0.5, 0.7, 0.9. Even 1.3 and 1.4 mm mechanisms were available, and 0.4 and 0.2 versions are now produced.
The mechanical pencil became successful in Japan with some improvements in 1915 by Tokuji Hayakawa, a metal worker who had just finished his apprenticeship. It was introduced as the Ever-Ready Sharp Pencil. Success was not immediate, since the metal shaft—essential for the pencil's long life—was unfamiliar to users. The Ever-Sharp began selling in huge numbers, however, after a company from Yokohama made a large order. Later Tokuji Hayakawa's company got its name from that pencil: Sharp.
At nearly the same time, in America, Charles R. Keeran was developing a similar pencil that would be the precursor of most of today's pencils. Keeran's design was ratchet-based, whereas Hayakawa's was screw-based. These two development histories are often combined into one.
Mechanical pencils can be divided into two basic types: those that both hold the lead and actively propel it forward during use, and those that only hold the lead in position against gravity.
Most mechanical pencils use small sub-millimeter leads and have an internal mechanism that propels the lead forward from a holding chamber inside the barrel. There are a number of different mechanism types:
Ratchet-based pencils are a variant of the clutch pencil, in which the lead is held in place by two or three small jaws inside a ring at the tip. The jaws are controlled by a button on the end or the side of the pencil. When the button is pushed, the jaws move forward and separate, allowing the lead to advance. When the button is released and the jaws retract, the "lead retainer" (a small rubber device inside the tip) keeps the lead in place, prevents the lead from either falling freely outward or riding back up into the barrel until the jaws recover their grip.
A clutch pencil (or leadholder) tends to use thicker leads (2–4 mm) and generally holds only one piece of lead at a time.
A typical clutch pencil is activated by pressing the eraser cap to open the jaws inside the tip, allowing the lead to freely drop through from the barrel (or into it when retracting). Because the lead falls freely when the jaws are opened, its forward movement cannot be controlled except by externally halting its progress. This can be easily done by keeping the tip of the pencil a few millimeters above a work surface or the palm of one's hand.
Some clutch pencils do have mechanisms which incrementally advance the lead, such as the Alvin Tech-Matic leadholder, but are not normally considered to be in the same category as most pencils with propellant mechanisms.
Compared to standard pencils, mechanical pencils have a smaller range of marking types. Nevertheless, numerous variations exist. Most mechanical pencils can be refilled, but some inexpensive models are meant to be disposable and discarded when empty.
Mechanical pencil mechanisms use only a single lead diameter. Some pencils, such as the Pentel Function 357, place several mechanisms within the same housing, so as to offer a range of thicknesses, in this case three: 0.3, 0.5 and 0.7 mm.
Different sizes of lead diameters are available to accommodate various preferences and pencil builds, as shown in the table below. The most popular lead sizes are 0.5mm and 0.7mm, whose line widths allow for precise writing and drawing. There are also rare .05, .1, and .2 mm leads.
Pencil Lead Diameters
| Diameter | Uses |
|---|---|
| 0.2mm | technical work |
| 0.3mm | technical work |
| 0.4mm | technical work |
| 0.5mm | general writing, general technical work, beginner’s technical work |
| 0.7mm | general writing |
| 0.9mm | students/general writing |
| 1.0mm | rare, used in pre-1950 Parker pencils |
| 1.18mm | older, used in pencils like the Yard-O-Led |
| 1.3mm | Pentel manufactures glitter leads in this diameter |
| 1.4mm | Faber-Castell e-Motion and the new Lamy ABC as well as some Stabilo children's pencils |
| 2mm | drafting leadholders |
| 3.15mm | non-drafting leadholders |
| 5.6mm | non-drafting leadholders |
Pencils with sub-millimeter leads can usually hold multiple leads at the same time, reducing the frequency of refills. A notable exception was the Pentel 350 E, possibly Pentel's first mechanical pencil,[10] which could only hold a single stick of 0.5mm lead. Refill leads can be bought in small tubes and inserted into the barrel as needed.
As with non-mechanical pencils, the leads of mechanical pencils are available in a range of graphite/binder ratios, depending on the user's desired balance between darkness and durability.
Mechanical pencils with colored leads are relatively rare, but do exist. Crayola's "Twistable" product line includes two different types of colored pencils (erasable and non-erasable) with mechanical feed mechanisms, but does not offer refill leads. Several non-US companies such as Pentel, Pilot, and uni-ball currently manufacture colored refill leads in a limited range of diameters (0.5mm, 0.7mm, or 2mm) for their own products. Koh-i-Noor makes mechanical colored pencils with replaceable leads in 2.0, 3.15 and 5.6mm sizes.[11]
| Book: Pencils | |
| Wikipedia books are collections of articles that can be downloaded or ordered in print. | |
|
||||||||||||||||
