Khatyrkite | |
---|---|
General | |
Category | Native element class, alloy |
Chemical formula | (Cu,Zn,Fe)Al2 |
Strunz classification | 01.AA.15 |
Identification | |
Color | Gray-yellow (reflection), opaque |
Crystal system | Tetragonal (4/m 2/m 2/m), space group I4/mcm |
Cleavage | {100}, distinct |
Fracture | Malleable |
Mohs scale hardness | 5–6 |
Luster | Metallic |
Streak | Dark gray |
Specific gravity | 4.42 g/cm3 (calculated) |
Other characteristics | non-magnetic, non-radioactive |
References | [1][2][3] |
Khatyrkite ( /ˈkæti.ərkaɪt/ kat-ee-ər-kyt)[4] is a rare mineral which is mostly composed of copper and aluminium, but might contain up to about 15% of zinc or iron;[3][5] its chemical structure is described by an approximate formula (Cu,Zn)Al2 or (Cu,Fe)Al2. It was discovered in 1985 in placers derived from serpentine, in association with another rare mineral cupalite ({Cu,Zn,Fe}Al). Both minerals are thus far restricted to the area of Listvenitovyi Stream, in the Khatyrka ultramafic (silicon-poor) zone of the Koryak–Kamchatka fold area, Koryak Mountains, Beringovsky District, Chukotka Autonomous Okrug, Far Eastern Federal District, Russia. The mineral's name derives from the Khatyrka (Russian: Хатырка) zone where it was discovered.[6] Its holotype (defining sample) is preserved in the Mining Museum in Saint Petersburg, and parts of it can be found in other museums, such as Museo di Storia Naturale di Firenze.[1][2][5]
Contents |
In the initial studies of khatyrkite, a negative correlation was observed between copper and zinc, i.e. the higher the copper the lower the zinc content and vice versa, which is why the formula was specified as (Cu,Zn)Al2.[7] It was found later that iron can be substituted for zinc.[5] The mineral is opaque and has a steel-gray yellow tint in reflected light, similar to native platinum. Isotropic sections are light blue whereas anisotropic ones are blue to creamy pink. Strong optical anisotropy is observed when the crystals are viewed in polarized light. Khatyrkite forms dendritic, rounded or irregular grains, typically below 0.5 millimeter in size, which are intergrown with cupalite. They have a tetragonal symmetry with point group 4/m 2/m 2/m, space group I4/mcm and lattice constants a = 0.607(1) nm, c = 0.489(1) nm and four formula units per unit cell. The crystalline structure parameters are the same for khatyrkite and synthetic CuAl2 alloy. The density, as calculated from XRD the lattice parameters, is 4.42 g/cm3. The crystals are malleable, that is they deform rather than break apart upon a strike; they have the Mohs hardness is between 5 and 6 and Vickers hardness is in the range 511–568 kg/mm2 for a 20–50 gram load and 433–474 kg/mm2 for a 100 gram load.[7]
Khatyrkite and cupalite are accompanied by spinel, corundum, stishovite, augite, forsteritic olivine, diopsidic clinopyroxene and several Al-Cu-Fe metal alloy minerals. The presence of unoxidized aluminium in khatyrkite and association with the stishovite – a form of quartz which exclusively forms at high pressures of several tens gigapascals – suggest that the mineral is formed either upon meteoritic impact or in the deep earth mantle.[5][8]
Khatyrkite is remarkable by that it contains micrometre-sized grains of the only known naturally occurring quasicrystal – aperiodic, yet ordered structure. The quasicrystal has a composition of Al63Cu24Fe13 which is close to that of a well-characterized synthetic Al-Cu-Fe material. This was the first quasicrystal found in nature and remains the only known naturally occurring example of a quasicrystal.[5]
Quasicrystals were first reported in 1984[9] and named so by Dov Levine and Paul Steinhardt.[10] More than 100 quasicrystal compositions have been discovered by 2009 – all synthesized in the laboratory. Steinhardt initiated a large-scale search for natural quasicrystals around the year of 2000 using the database of the International Centre for Diffraction Data. About 50 candidates were selected out of 9,000 minerals based on a set of parameters defined by the structure of the known quasicrystals. The corresponding samples were examined with X-ray diffraction and transmission electron microscopy but no quasicrystals were found. Widening of the search eventually included khatyrkite. A sample of the mineral was provided by the Museo di Firenze and was later proven to be part of the Russian holotype specimen. Mapping its chemical composition and crystalline structure revealed agglomerate of grains up to 0.1 millimeter in size of various phases, mostly khatyrkite, cupalite (zinc or iron containing), some yet unidentified Al-Cu-Fe minerals and the Al63Cu24Fe13 quasicrystal phase. The quasicrystal grains were of high crystalline quality equal to that of the best laboratory specimens, as demonstrated by the narrow diffraction peaks. The mechanism of their formation is yet uncertain. The specific composition of the accompanying minerals and the location where the sample was collected – far from any industrial activities – confirm that the discovered quasicrystal is of natural origin.[5][8]