Howard DGA-3

Howard DGA-3 "Pete"
"Little Audrey" on display
Role Racing aircraft
National origin United States of America
Designer Ben Howard, Gordon Israel

The Howard DGA-3 "Pete" aka "Damned Good Airplane - 3", aka "Baker Special", aka "Little Audrey" was the third aircraft built by Ben Howard, and the first in a series of racing aircraft. Howard claimed the ship was so fast from his use of "Go Grease".[1]

Contents

Design and development

The DGA-3 was started as a side project based on getting the best performing aircraft using an Wright Gipsy engine Howard had available. The aircraft went from the drawing board to completion in eight months.

The fuselage was made of welded steel tubing with aircraft fabric covering. The control surfaces were wood with plywood covering. The cockpit was sized to an absolute minimum. The axle between wheels was shaped like an airfoil, producing some of the lift. In 1947, "Pete" was rebuilt as the "Baker Special" with a Continental engine for midget racing. The aircraft was rebuilt once again by the Experimental Aircraft Association founder Paul Poberezny as "Little Audey". The aircraft was mounted with Luscombe wings and a Continental A-75.[2]

Operational history

In 1953 "Pete" was rebuilt as a homebuilt sportsplane "Little Audrey". The aircraft flew up until 1981. It was once in the collection of the Crawford Auto-Aviation Museum.[3] A restoration was performed and the aircraft was donated to the EAA Airventure Museum in Oshkosh, Wisconsin in 1991.[4]

Specifications (Howard DGA-3)

Data from Sport Aviation

General characteristics

Performance

References

  1. ^ Don Dwiggins. They flew the Bendix Race: the history of the competition for the Bendix Trophy. 
  2. ^ Sport Aviation. March 1959. 
  3. ^ Thomas G. Matowitz, Jr.. Cleveland's Legacy of Flight. 
  4. ^ "Howard-Poberezney Pete III". http://www.airventuremuseum.org/collection/aircraft/Howard-Poberezny%20Pete%20III%20Little%20Audrey.asp. Retrieved 20 June 2011.