The outer hull of HMAS Otway, at Holbrook, New South Wales |
|
| Career (Australia) | |
|---|---|
| Builder: | Scotts Shipbuilding and Engineering Company |
| Laid down: | 29 June 1965 |
| Launched: | 29 November 1966 |
| Commissioned: | 23 April 1968 |
| Decommissioned: | 17 February 1994 |
| Fate: | Decommissioned, now a monument |
| General characteristics | |
| Class and type: | Oberon-class submarine |
| Displacement: | 1,610 tons standard 2,030 tons surfaced 2,410 tons submerged |
| Length: | 295.2 ft (90.0 m) |
| Beam: | 26.5 ft (8.1 m) |
| Draught: | 18 ft (5.5 m) |
| Propulsion: | 2 x Admiralty Standard Range supercharged V16 diesel generators 2 x English Electric motors 3,500 bhp (2,600 kW) 4,500 shp (3,400 kW) 2 shafts |
| Speed: | 12 knots (22 km/h; 14 mph) surfaced 17 knots (31 km/h; 20 mph) submerged 11 knots (20 km/h; 13 mph) at snorkel depth |
| Range: | 9,000 nautical miles (17,000 km; 10,000 mi) at 12 knots (22 km/h; 14 mph) |
| Test depth: | 200 metres (660 ft) |
| Complement: | As launched: 8 officers, 56 sailors At decommissioning: 8 officers, 60 sailors |
| Sensors and processing systems: |
Sonar: Atlas Elektronik Type CSU3-41 bow array BAC Type 2007 flank array Sperry BQQ 4 Micropuffs rangefinding array Radar: Kelvin Hughes Type 1006 |
| Armament: | Torpedo tubes: 6 x 21-inch (53 cm) bow tubes 2 x short-length 21-inch (53 cm) stern tubes (later removed) 1996 payload: Mix of 20: • Mark 48 Mod 4 torpedoes • UGM-84 Sub Harpoon missiles |
HMAS Otway (S 59) was an Oberon-class submarine of the Royal Australian Navy (RAN).
Contents |
The Oberon class was based heavily on the preceding Porpoise class of submarines, with changes made to improve the vessels' hull integrity, sensor systems, and stealth capabilities.[1] Eight submarines were ordered for the RAN, in two batches of four.[2] The first batch (including Otway) was approved in 1963, and the second batch was approved during the late 1960s, although two of these were cancelled before construction started in 1969, with the funding redirected to the Fleet Air Arm.[3][4] This was the fourth time the RAN had attempted to establish a submarine branch.[5]
The submarine is 295.2 feet (90.0 m) long, with a beam of 26.5 feet (8.1 m), and a draught of 18 feet (5.5 m) when surfaced.[6] At full load displacement, she displaces 2,030 tons when surfaced, and 2,410 tons when submerged.[6] The two propeller shafts are each driven by an English Electric motor providing 3,500 brake horsepower (2,600 kW) and 3,500 shaft horsepower (2,600 kW); the electricity for these is generated by two Admiralty Standard Range supercharged V16 diesel generators.[7] The submarine could travel at up to 12 knots (22 km/h; 14 mph) on the surface, and up to 17 knots (31 km/h; 20 mph) when submerged, had a maximum range of 9,000 nautical miles (17,000 km; 10,000 mi) at 12 knots (22 km/h; 14 mph), and a test depth of 200 metres (660 ft).[6][7] When launched, the boat had a company of 8 officers and 56 sailors, but by the time she decommissioned, the number of sailors had increased to 60.[6][7] In addition, up to 16 trainees could be carried.[7]
The main armament of the Oberons consisted of six 21-inch (533.4 mm) torpedo tubes.[1] The British Mark 8 torpedo was initially carried by the submarine; this was later replaced by the wire-guided Mark 23.[8] Between 1977 and 1985, the Australian Oberons were upgraded to carry United States Navy Mark 48 torpedoes and UGM-84 Sub Harpoon anti-ship missiles.[5][9] As of 1996, the standard payload of an Australian Oberon was a mix of 20 Mark 48 Mod 4 torpedoes and Sub Harpoon missiles.[6] Some or all of the torpedo payload could be replaced by Mark 5 Stonefish sea mines, which were deployed through the torpedo tubes.[6][8] On entering service, two stern-mounted, short-length 21-inch (53 cm) torpedo tubes for Mark 20 anti-submarine torpedoes.[10] However, the development of steerable wire-guided torpedoes made the less-capable aft-firing torpedoes redundant; they were closed off, and later removed during a refit.[10]
Otway was laid down by Scotts Shipbuilding and Engineering Company at Greenock, Scotland on 29 June 1965,[9] The submarine was launched on 29 November 1966 by Princess Marina: the first RAN submarine and second RAN vessel after the cruiser HMAS Canberra to be launched by a member of the Royal Family.[11] In January 1968, RAN personnel sent to Scotland to train before the submarine was completed provided assistance to residents whose houses were destroyed in a storm.[12] Otway was commissioned into the RAN on 23 April 1968.[9]
Otway arrived in Australian waters in September 1968 after sailing from the United Kingdom via ports in Africa.[12] During this voyage, the boat became the first RAN vessel to visit Ghana, and the first RAN submarine to round the Cape of Good Hope.[13]
On 10 January 1969, the submarine escorted HMS Trump, the last submarine of the Royal Navy's Australia-based 4th Submarine Squadron out of Sydney Harbour.[12]
During 1970, the submarine visited New Zealand and was involved in training exercises in the Indian Ocean.[13]
In March and April 1971, Otway participated in SEATO Exercise Subok.[13] On 26 August 1971, Otway's fin was struck by a dummy helicopter-dropped torpedo during training exercises in Jervis Bay.[13] There was only superficial damage to the submarine, which was quickly repaired.[13] On 1 September, the fin was damaged again when a periscope mast was hit by a whale: repairs were completed in Sydney that day.[13] In October, the submarine visited Brisbane for Navy Week, but was forced to sail on short notice and with only two-thirds of her personnel to locate and rescue the crew of the ketch One and All, which had run aground on Middleton Reef.[13]
HMAS Otway paid off on 17 February 1994 and was sold in November 1995. The casing and fin of Otway is on display at a park in Holbrook, New South Wales.[5]
Media related to [//commons.wikimedia.org/wiki/Category:HMAS_Otway_(S_59) HMAS Otway (S 59)] at Wikimedia Commons
|
||||||||||||||||||||
|
||||||||||||||||||||||||||||