Glyoxal

Glyoxal
Identifiers
CAS number 107-22-2 Y
PubChem 7860
ChemSpider 7572 Y
UNII 50NP6JJ975 Y
KEGG C14448 Y
ChEBI CHEBI:34779 Y
Jmol-3D images Image 1
Properties
Molecular formula C2H2O2
Molar mass 58.04 g/mol
Density 1.27 g/cm3
Melting point

15 °C, 288 K, 59 °F

Boiling point

51 °C, 324 K, 124 °F

Thermochemistry
Specific heat capacity, C 1.044 J/k/g
Hazards
NFPA 704
1
2
1
Flash point −4 °C, 269 K, 25 °F
Autoignition
temperature
285 °C, 558 K, 545 °F
Related compounds
Related aldehydes acetaldehyde
glycolaldehyde
propanedial
methylglyoxal
Related compounds glyoxylic acid
glycolic acid
oxalic acid
pyruvic acid
diacetyl
acetylacetone
 Y (verify) (what is: Y/N?)
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa)
Infobox references

Glyoxal is an organic compound with the formula OCHCHO. This yellow colored liquid is the smallest dialdehyde (two aldehyde groups). Its tautomer acetylenediol is unstable.

Contents

Production

Commercial glyoxal is prepared either by the gas phase oxidation of ethylene glycol in the presence of a silver or copper catalyst or by the liquid phase oxidation of acetaldehyde with nitric acid. Global nameplate capacity is ~220,000 tons, with production rates less, due to over-capacity mostly in Asia. Most production is done via the gas phase oxidation route.

The first commercial glyoxal source was in Lamotte, France, started in 1960 and currently owned by Clariant. The single largest commercial source is BASF in Ludwigshafen, Germany at ~60,000 tons/annum. Only 2 production sites (Geismer, LA and Charlotte, NC) exist in the Americas. Significant capacity has been added recently in China. Commercial bulk glyoxal is made and reported as a 40%-strength solution.

Glyoxal may be synthesized in the laboratory by oxidation of acetaldehyde with selenious acid.[1] The preparation of anhydrous glyoxal entails heating solid glyoxal hydrate(s) with phosphorus pentoxide and condensing the vapors in a cold trap.[2] The experimentally determined Henry's law constants of glyoxal is: KH = 4.19 × 105 × exp[(62.2 × 103/R) × (1/T − 1/298)][3]

Applications

Coated paper and in the textile finishes use large amounts of glyoxal as a crosslinker for starch-based formulations and as a starting material with ureas for wrinkle-resistant chemical treatments. It is used as a solubilizer and cross-linking agent in polymer chemistry:

It is a valuable building block in organic synthesis, especially in the synthesis of heterocycles such as imidazoles.[4] A convenient form of the reagent for use in the laboratory is its bis-hemiacetal with ethylene glycol, 1,4-dioxane-2,3-diol. This compound is commercially available.

Speciation in solution

Glyoxal is supplied typically as a 40% aqueous solution. Like other small aldehydes, glyoxal forms hydrates. Furthermore, the hydrates condense to give a series of oligomers, the structures of which remain uncertain. For most applications, the exact nature of the species in solution is inconsequential. At least two hydrates of glyoxal are sold commercially:

It is estimated that, at concentrations less than 1 M, glyoxal exists predominantly as the monomer or hydrates thereof, i.e., OCHCHO, OCHCH(OH)2, or (HO)2CHCH(OH)2. At concentrations >1 M, dimers predominate. These dimers are probably dioxolanes, with the formula [(HO)CH]2O2CHCHO.[5] Dimer and trimer can precipitate, due to lower solubility, from solution at <40 F.

Other occurrences

Glyoxal is an inflammatory compound formed when cooking oils and fats are heated to high temperatures.

See also

References

  1. ^ Ronzio, A. R.; Waugh, T. D. (1955), "Glyoxal Bisulfite", Org. Synth., http://www.orgsyn.org/orgsyn/orgsyn/prepContent.asp?prep=cv3p0438 ; Coll. Vol. 3: 438 
  2. ^ Harries, C.; Temme, F. (1907). "Über monomolekulares und trimolekulares Glyoxal". Berichte 40: 165–172. doi:10.1002/cber.19070400124. 
    A quote from this paper is instructive of the chemistry of that era "Man erhitzt nun das Glyoxal-Phosphorpentoxyd-Gemisch mit freier Flamme und beobachtet bald, dass sich unter Schwarzfärbung des Kolbeninhalte ein flüchtiges grünes Gas bildet, welches sich in der gekühlten Vorlage zu schönen Krystallen von gelber Farbe kondensiert." (One heats the mixture of (crude) glyoxal and P4O10 with an open flame and soon observes that, upon blackening of the contents, a mobile green gas, which condenses in the cooled flask as beautiful yellow crystals).
  3. ^ Ip, H. S. Simon; Huang, X. H. Hilda, Yu, Jian Zhen. "Effective Henry's law constants of glyoxal, glyoxylic acid, and glycolic acid". Geophysical Research Letters 36 (1). doi:10.1029/2008GL036212. 
  4. ^ Snyder, H. R.; Handrick, R. G.; Brooks, L. A. (1955), "Imidazole", Org. Synth., http://www.orgsyn.org/orgsyn/orgsyn/prepContent.asp?prep=cv3p0471 ; Coll. Vol. 3: 471 
  5. ^ Whipple, E. B. (1970). "Structure of Glyoxal in Water". J. Am. Chem. Soc. 90 (24): 7183–7186. doi:10.1021/ja00727a027. 

External links