The Environmental Technology Verification (ETV) Program of the Environmental Protection Agency (EPA) in the United States develops testing protocols and verifies the performance of innovative environmental technologies that can address problems that threaten human health or the natural environment. ETV was created to accelerate the entrance of new environmental technologies into the domestic and international marketplace by providing objective technology information on commercial ready technologies. ETV is a voluntary program. Developers/vendors of environmental technologies are not required to participate in the program, nor are they required to seek verification. ETV does not pass or fail and does not rank technologies. All verification reports and statements are made publicly available on the ETV Web site.
Contents |
ETV has five centers which are called verification organizations. These verification centers are run through a cooperative agreement
The center verifies the performance of commercial-ready technologies that monitor contaminants and natural species in air, water, and soil. The center tests both field-portable and stationary monitors, as well as innovative technologies that can be used to describe the environment (site characterization).
This center verifies commercial-ready technologies that control stationary and mobile air pollution sources, and mitigate the effects of indoor air pollutants.
This center verifies the performance of commercial-ready drinking water treatment systems for use in small communities, or individual homes and businesses.
This center verifies the performance of commercial-ready technologies that produce, mitigate, monitor, or sequester greenhouse gas emissions.
This center verifies the performance of commercial-ready technologies that protect groundwater and surface waters from contamination.
A component of ETV which was added in 2005 to address priority environmental technology categories for meeting the USEPA needs for credible performance information. Priority is given to technologies that can address high-risk environmental problems.
Other topical efforts are listed below.
ETV has verified over 400 technologies and developed more than 90 protocols. A survey of participating vendors completed in 2001 showed overwhelming support for the ETV program. Responses indicated that 73 percent of the vendors were using ETV information in product marketing, and 92 percent of those surveyed responded that they would recommend ETV to other vendors.
In 2006, EPA published a two-volume set of case studies which document actual and projected outcomes from verifications of technologies in 15 technology categories (ETV Program Case Studies Vol 1 EPA/600/R-06/001 and ETV Program Case Studies Vol II EPA/600/R-06/082).
An Association of State Drinking Water Administrators (ASDWA) survey showed that 34 states recognize and use ETV reports. ASDWA and its members rely heavily on these evaluations to support the use of new technologies and products in the drinking water industry.
Designating a product or technology as ETV “verified” does not mean a given technology reduces every emission, has no drawbacks, or outperforms solutions not on the “verified” list.
Designating a product or technology as “verified” means that a given technology produced “X” outcome, when tested according to a specific protocol.
of 5% during "line haul duty", but the % of error was + / - 4%, and under the heaviest load, there was no reading given for fuel consumption reduction. The Envirofuels verification report indicates that TPM increased as little as 40%, and as much as 170%. Envirofuels Diesel Fuel Catalyzer, while "verified', actually increased TPM emissions, and showed what amounts to an inconclusive result for fuel use reduction.
The composition of TPM (total diesel particulate matter) is the sum of "dry" particulates,and "wet" particulates.
"Dry" Particulate emissions are also known as inorganic soot, black carbon, or elemental carbon.
"Wet" particulates are also known as organic carbon, soluble organic fractions ( SOF's)and volatile organic carbon ( VOC's).
The exact ratio of "wet to dry" diesel particulate matter will vary by engine load, duty cycle, fuel composition and specification,and engine tuning.
An opacity reading is a measurement of the level of visible inorganic carbon, also known as soot. Opacity measurements cannot detect organic carbon emissions, VOC / SOF emissions, or NOx emissions.
Specialized instrumentation is required to determine organic carbon levels,and to detect other unseen particulates. When used in conjunction with an opacity meter, the technician can detect ( for example) an increase in TPM, and detect a decrease in visible smoke ( opacity ) emissions.
The ETV verification program ( and other verification pathways )publish the verification reports, technology options charts, and technical summaries, once testing has been completed.
The ETV testing facility will issue press releases on behalf of the technology vendor, upon completion of testing.
The ETV verification program reports all outcomes, and leaves the ultimate decision regarding the suitability and applicability of a given technology to the discretion of the end user. Additional research may be necessary in order to adequately address specific situations.
"By “verify,” ETV means to establish the performance of a technology (i.e., confirm, corroborate, substantiate, validate). ETV verification does not imply approval, certification, or designation by EPA, but rather provides a quantitative assessment of the performance of a technology under specific, predetermined criteria or protocols and adequate data quality assurance procedures."
"The ( VDRP) Verification Program evaluates technologies to support their use in the market while providing customers with confidence that verified technologies will provide emission reductions as listed. This Verification process evaluates the emission reduction performance of retrofit technologies, including their durability, and identifies engine operating criteria and conditions that must exist for these technologies to achieve those reductions."
"Mention of commercial product names does not imply endorsement or recommendation"