Ammonium aluminium sulfate | |
---|---|
Aluminium ammonium bis(sulfate) |
|
Other names
Ammonium alum |
|
Identifiers | |
CAS number | 7784-25-0 , 7784-26-1 (dodecahydrate) |
ChemSpider | 2297489 , 56419 (dodecahydrate) |
EC number | 232-055-3 |
RTECS number | WS5640010 |
Jmol-3D images | Image 1 |
|
|
|
|
Properties[1] | |
Molecular formula | (NH4)Al(SO4)2 |
Molar mass | 237.15 g/mol (anhydrous) 453.33 g/mol (dodecahydrate) |
Appearance | white crystals |
Density | 2.45 g/cm3 (anhydrous) 1.64 g/cm3 (dodecahydrate) |
Melting point |
93.5 °C (dodecahydrate) |
Boiling point |
120 °C dehydr. (dodecahydrate) |
Solubility in water | 15 g/100 ml (20 °C, dodecahydrate) |
Structure | |
Crystal structure | Hexagonal (anhydrous) Cubic (dodecahydrate) |
Coordination geometry |
Octahedral (Al3+) |
Hazards[2] | |
MSDS | External MSDS |
GHS pictograms | |
GHS signal word | WARNING |
GHS hazard statements | H315, H319 |
GHS precautionary statements | P264, P280, P302+352, P305+351+338, P321, P332+313, P337+313, P362 |
EU Index | not listed |
Flash point | non-flammable |
(verify) (what is: / ?) Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa) |
|
Infobox references |
Ammonium aluminium sulfate, also known as ammonium alum is a white crystalline double sulfate usually encountered as the dodecahydrate, formula (NH4)Al(SO4)2·12H2O. It is used in small amounts in a variety of niche applications. The dodecahydrate occurs naturally as the rare mineral tschermigite.[1]
Contents |
Ammonium alum is made from aluminium hydroxide, sulfuric acid and ammonium sulfate. It forms a solid solution with potassium alum. Pyrolysis leaves alumina. Such alumina is used in the production of grinding powders and as precursors to synthetic gems.[3]
Ammonium alum is not a major industrial chemical or a particularly useful laboratory reagent, but it is inexpensive and nontoxic, which invites many niche applications. It is used in water purification, in vegetable glues, in porcelain cements, in deodorants and in tanning, dyeing and in fireproofing textiles.[4] The pH of the solution resulting from the topical application of ammonium alum with perspiration is typically in the slightly acid range, from 4 to 5.[5]
Ammonium alum is a common ingredient in animal repellant sprays.[6][7][8]
Aluminium sulfate, closely related to ammonium alum, is nontoxic with an LD50 of 6207 mg/kg. No human or ecological (for reduced concentrations) toxicity registered.[9]