The Digibox is a device marketed by British Sky Broadcasting in the UK and Republic of Ireland to enable home users to receive digital satellite television broadcasts (satellite receiver) from the Astra satellites at 28.2° east. An internet service is also available through the device, similar in some ways to the American MSN TV. The first Digiboxes shipped to consumers in mid-1998, and the hardware reference design is unchanged since. Compared to other satellite receivers, they are severely restricted.
Contents |
The Digibox's internal hardware details are not publicly disclosed, however some details are clearly visible on the system. All early boxes except the Pace Javelin feature dual SCART outputs, an RS232 serial port, a dual-output RF modulator with passthrough, and RCA socketed audio outputs, as well as a 33.6 modem and an LNB cable socket. A VideoGuard card slot, as well as a second smart-card reader are fitted to the front (these are for the Sky viewing card and other interactive cards). All share an identical user interface and EPG, with the exception of Sky+ HD boxes which use the new Sky+ HD Guide. All Sky and early HD boxes had a s-video output socket. The latest DRX595 has dropped the RF modulator outputs. A PC type interface was fitted internally to some early standard boxes but was never utilised by Sky. The latest HD boxes only have a single scart socket but have a RCA/phono socket for composite video output. All Sky+ and HD boxes have an optical sound output.
The serial port outputs data used for the Sky Gnome and Sky Talker.[1] The Sky Gamepad sends data to the box via the serial port.[2]
Uniquely, the second RF port outputs a 9 V power signal which is used to power 'tvLINK' devices that can be attached to the RF cable next to a TV in a remote room. The tvLINK has an IR detector and sends commands from the remote control back to the digibox on a 6 MHz carrier on the RF cable. This allows the sky box to be viewed and controlled from another room by running a single RF cable.
All Digiboxes used to run on OpenTV (the latest HD boxes now use what is known internally as Project Darwin software) with Sky's EPG software and NDS VideoGuard conditional access. The Digibox receives software updates over the air, even when in standby mode should an update be available. The software features Sky-controlled channel numbering, the ability to view OpenTV or WapTV applications provided as "interactive" or "teletext" content on channels, parental controls, the ability to order PPV events and some basic control over lists of favourite channels and show reminders.
The digibox, notably, cannot be turned off without removing all sources of power. Standby disables video and sound output and changes the colour of the front LED but leaves all other hardware running, amounting in as little as a 1 W power saving over the box being fully on. The latest HD boxes now have a "deep sleep" mode for use when recordings are not scheduled which uses less than 1/2 w.
Early decoders seemingly support only 700 channels approximately in their channel listing, as Sky has announced it is halting SD channels' launch applications,[3] with over 100 awaiting launch, over 600 existing channels, and an average closure rate of 1 per week.
The Digibox remote control comes in four physical designs - blue with new Sky logo, blue with old Sky logo (oddly, this version was being issued from around the first year of the Sky service, despite the fact that logo fell out of use before it launched), black with new Sky logo (Sony boxes only) and silver with new Sky logo. However, all have multiple variations at present with a new version of Sky remote control being produced every year, to support the addition of new televisions to its universal remote control capabilities.
The units are DVB-S compatible, and usually carry the DVB logo on the front. However, their use as a DVB-S receiver for anything other than Sky services is seriously limited by their reduced choice of symbol rates (22,000 and 27,500; additionally 28,250 and 29,000 on Sky+ HD), and their inability to store more than 50 (less on some models) non-EPG channels without losing them. Following a software "upgrade" the digibox will not display programmes from non 28.2 East Satellites. Additionally, once any form of parental controls are enabled, the "Other Channels" menu requires PIN entry on every use.
The box also refuses to let users view channels which are free-to-air but displaying flags claiming encryption, which locks out some channels even on the satellites Sky use themselves, such as Free to View channels.
Digiboxes have been made by Amstrad, Sony, Thomson, Panasonic, Grundig, and most commonly, Pace. Despite the reference designs being identical, a number of digibox lines have specific faults or traits, such as failing modems on Grundig units, and unstable tuners on older model Pace boxes. Some units add features not found on other models, such as S-Video sockets on some Grundig units, and TOSLINK output on Sony's.
For a long period of time in 2004 and 2005, only one Digibox was in production, the Pace DS430N, but Amstrad and Thomson have resumed production with the DRX500 and DSi4212 boxes respectively. Digiboxes for new customers are assigned randomly, and cannot be chosen, creating an after market for specific boxes due to their individual features. Sky bought out Amstrad satellite production in 2007 and now only distribute boxes which initially appeared as Amstrad models but are now badged merely as Sky.
In late 2005, it was announced that all future Digiboxes would have a standardised cosmetic design, although retain the three current makers, and have a slightly redesigned remote control, which would be recoloured white with some blue keys.
Thomson and Amstrad began supplying these boxes in late 2005, with Pace following in late 2006. The standardised design is known as the "Flow" design.
A second generation of Digibox exists, marketed as Sky+. These PVR units have three versions: the 40 GB PVR1, the 40 GB PVR2, and the PVR3 which is fitted with a 160 GB HDD with 80GB available for user recordings, and the remaining 80 GB reserved for use by Sky Anytime. All have dual LNB inputs and an optical digital audio output, as well as all other features of the Sky box. These units are manufactured by Amstrad, Pace and Thomson only, and use a different remote control. USB ports are fitted to the PVR3. When Sky+ was launched, there was an additional £10 monthly charge to access the Sky+ functionality if two or more premium packages were not subscribed to. Sky have now removed this charge, effective 1 July 2007. Without a Sky+ Subscription, the Sky+ box reverts to the functionality of a normal Digibox, albeit without Autoview modes.
The Sky+160 box has 160 GB to record to and is manufactured solely by Thomson. This unit is also fitted with USB ports. (this unit has been discontinued)
A third generation of Digibox also exists, with the additional ability to receive DVB-S2 HDTV signals in the MPEG-4 format. The initial sole manufacturer of these Sky+ HD boxes was Thomson, and made their debut on 22 May 2006 with the launch of HDTV channels on Sky. Although around 17,000 digiboxes were initially produced, they could not meet demand and some had to wait for longer for their SkyHD Digibox. Past manufacturers are Thomson, Pace, Amstrad and Samsung.
These boxes have all the features of a Sky+ box, as well as a HDMI output, and the early Thomson DSI8215 model has component video output. Both SATA and Ethernet ports are also supplied, currently used for the Sky Anytime+ service. As well as requiring a Sky+ subscription or any subscription, HD versions of the subscription channels require the payment of an additional £10.25 (or €15) per month, although HD programs can be viewed on free-to-air services such as BBC HD. ITV1 HD, Channel 4HD, NHK World HD and with a FreesatFromSky card Channel 5HD
On 16 March 2011, Sky launched the Sky HD box, primarily targeted at multiroom subscribers.[4] and also used for FreesatFromSky installations. The Sky HD box is not a personal video recorder, meaning it has no hard disk and cannot support the Sky+ functionality.
All Sky boxes, whether Digiboxes, Sky+ or SkyHD incorporate card pairing. This involves the 'marrying' or 'pairing' of a viewing card to one particular STB, thus preventing one card (and indeed subscription) being used on multiple digiboxes. During installation the engineer will initiate a 'callback' from the STB to Sky via modem and telephone line, transmitting details of the viewing card number and the box in which it is installed. Once this step has been completed it is no longer possible to view premium channels such as Movies or Sports on any other box besides that which the card was paired with. Notably, the card can still be used to view non-premium channels such as Sky1 but will display an error message when attempting to watch a movie channel or sports channel with an unpaired box and card combination. A card can be 're-paired' in some instances such as STB replacement or multiroom relocation, however this must be initiated by Sky and cannot be completed by a end-user.
Standard Digiboxes use almost as much power in standby as when active; the "standby" setting merely mutes the sound and cuts off the picture, but internal signal processing continues at the same rate.[5] Sky+ boxes are believed to reduce their power consumption more significantly in standby because they can spin down hard disks. Power consumption for the standard box varies from around 10 to 18 Watts. Most Sky+HD boxes consume up to 60W when active, falling to ~30W when the disc is powered down. To some degree, this has been addressed with the latest DRX890/895 HD boxes. These have a power consumption of 45W max but now have a "deep sleep" mode consuming around 1/2 W.
|
|||||||||||||||||