Degasification is the removal of dissolved gases from liquids, especially water or aqueous solutions, in the fields of science and engineering. There are numerous possible methods for such removal of gases from solids.
Gases are removed for various reasons. Chemists remove gases from solvents when the compounds they are working on are possibly air- or oxygen-sensitive. The formation of gas bubbles when a liquid is frozen can also be undesirable, necessitating degassing.
Contents |
The solubility of gas obeys Henry's law, that is, the amount of a dissolved gas in a liquid is proportional to its partial pressure. Therefore, placing a solution under reduced pressure makes the dissolved gas less soluble. Sonication and stirring under reduced pressure can usually enhance the efficiency. This technique is often referred to as Vacuum degasification. Specialized vacuum chambers, called vacuum degassers, are used to degas materials through pressure reduction.
Generally speaking, the higher the temperature of a solution becomes, the less a gas dissolves provided it doesn't react with the solvent. Consequently, heating a solution can expel the remaining gas. Ultrasonication and stirring at high heat are also effective. This method needs no special apparatus and is easy to conduct. In some cases, however, the solvent and the solute decompose, react with each other, or evaporate at high temperature, and the rate of removal is less reproducible.
Gas-liquid separation membranes allow gas but not liquid to pass through. Flowing a solution inside a gas-liquid separation membrane and vacuating outside makes the dissolved gas go out through the membrane. This method has the advantage of being able to prevent redissolution of the gas, so it is used to produce very pure solvents.
The above three methods are used to remove all dissolved gasses. Below are methods for more selective removal.
Bubbling a solution with an inert gas substitutes the dissolved harmful, reactive gases such as oxygen and carbon dioxide. Nitrogen, argon, helium, and other inert gases are commonly used. To complete the substitution, the solution should be stirred vigorously and bubbled for a long time. Because helium is not very soluble in most liquids, this technique is also used to reduce the risk of bubble formation in HPLC systems.
If oxygen should be removed, the addition of reductants is sometimes effective. For example, especially in the field of electrochemistry, ammonium sulfite is frequently used as a reductant because it reacts with oxygen to form sulfate ions. Although this method can be applied only to oxygen and involves the risk of reduction of the solute, the dissolved oxygen is almost totally eliminated.
In this laboratory-scale technique, the fluid to be degassed is placed in a Schlenk flask and flash-frozen, usually with liquid nitrogen. Next a vacuum is applied, and the flask is sealed. A warm water bath is used to thaw the fluid, and upon thawing, bubbles of gas form and escape. The process is typically repeated three times.[1]
Yeast uses sugar to produce alcohol and carbon dioxide. In wine making, carbon dioxide is an undesired by-product for most wines. If the wine will be bottled quickly after fermentation, it is important to degas the wine. The most common method used is 'whipping' the wine with some form of whisk or spoon. Just after fermentation is completed and before the 'clearing' stage, the fermented juice is stirred vigorously until the majority of the gases have released from the liquid through agitation.
Wineries can often skip this step by aging their wines prior to bottling. Storing the wines in steel and wood barrels for months and sometimes years allows the gases to release from the juice and escape back into the air through air-locks.