Consecutive fifths

In music, consecutive fifths (sometimes known as parallel fifths) are progressions in which a perfect fifth is followed by a different perfect fifth between the same two musical parts (or voices): for example, from C to D in one part along with G to A in a higher part. Intervening octaves are irrelevant to this aspect of musical grammar; for example, parallel twelfths (i.e., as created by successive intervals of an octave plus a fifth) are equivalent to parallel fifths.[nb 1]

In the medieval period, large church organs and positive organs would often be permanently arranged for each single key to speak in a consecutive fifth. It is believed this practice dates to Roman times. A positive organ having this configuration has been reconstructed recently by Van der Putten and is housed in Groningen, and is used in an attempt to rediscover performance practice of the time.

Parallel motion in perfect consonances (P1, P5, P8) is strictly forbidden in species counterpoint instruction (1725–present)[1] and during the common practice period, the use of consecutive fifths was strongly discouraged. This was primarily due to the notion of voice leading in tonal music, in which, "one of the basic goals...is to maintain the relative independence of the individual parts."[2] A common theory is that the presence of the 3rd harmonic of the overtone series influenced the creation of the prohibition.

Contents

Development of the prohibition

Singing in consecutive fifths may have originated from the accidental singing of a chant a perfect fifth above (or a perfect fourth below) the proper pitch. Whatever its origin, singing in parallel fifths became commonplace in early organum and conductus styles. Around 1300, Johannes de Grocheo became the first theorist to prohibit the practice. However, parallel fifths were still common in 14th-century music. The early 15th century composer Leonel Power likewise forbade the motion of "2 acordis perfite of one kynde, as 2 unisouns, 2 5ths, 2 8ths, 2 12ths, 2 15ths," and it is with the transition to Renaissance-style counterpoint that the use of parallel perfect consonances was consistently avoided in practice.

Composers avoided writing consecutive fifths between two independent parts, such as tenor and bass lines.

The fifths did not have to be undisguised, or the only two notes of a melodic line. The interval may form part of a chord of any number of notes, and may be set well apart from the rest of the harmony, or finely interwoven in its midst. But the interval was always to be quit by any movement that did not land on another fifth.

The prohibition concerning fifths did not just apply to perfect fifths. Some theorists objected also to the progression from a perfect fifth to a diminished fifth in parallel motion; for example the progression from C and G to B and F (B and F forming a diminished fifth).

The strict avoidance of consecutive fifths is one of the major reasons some musicologists doubt whether Johann Sebastian Bach composed the famous Toccata and Fugue in D minor. Bach was an accomplished composer, highly skilled at avoiding consecutive fifths, but the toccata abounds with them. However, more recent arguments suggest this is not the case at all, and that the Toccata was written by Bach but written for violin and transcribed for organ.

The identification and avoidance of perfect fifths in the instruction of counterpoint and harmony help to distinguish the more formal idiom of classical music from popular and folk musics, in which consecutive fifths commonly appear in the form of double tonics and shifts of level. The prohibition of consecutive fifths in European classical music originates not only in the requirement for contrary motion in counterpoint but in a gradual and eventually self-conscious attempt to distance classical music from folk traditions. As Sir Donald Tovey explains in his discussion of Joseph Haydn's Symphony no. 88, "The trio is one of Haydn's finest pieces of rustic dance music, with hurdy-gurdy drones which shift in disregard of the rule forbidding consecutive fifths. The disregard is justified by the fact that the essential objection to consecutive fifths is that they produce the effect of shifting hurdy-gurdy drones."[3]

In the course of the 19th century consecutive fifths became more common, arising out of new textures and new conceptions of propriety in voice leading generally. They even became a stylistic feature in the work of some composers, notably Chopin; and with the early 20th century and the breakdown of common-practice norms the prohibition became less and less relevant.[4] (See below for later developments.)

Related progressions

Parallel octaves and fourths

Consecutive fifths are avoided in part because they cause a loss of individuality between parts. This lack of individuality is even more pronounced when parts move in parallel octaves or in unison. These are therefore also generally forbidden among independently moving parts.[nb 2]

Parallel fourths (consecutive perfect fourths) are allowed, "even though a P4 is the inversion of a P5."[5] The literature deals with them less systematically however, and theorists have often restricted their use. Theorists commonly disallow consecutive perfect fourths involving the lowest part, especially between the lowest part and the highest part. Since the beginning of the common practice period, it has been theorized that all dissonances should be properly resolved to a perfect consonance (there are few exceptions). Therefore, parallel fourths are generally dismissed in voice leading as a series of consecutive unresolved dissonances.

Hidden consecutives

So-called hidden consecutives, also called direct or covered octaves or fifths,[6][nb 3] occur when two independent parts approach a single perfect fifth or octave by similar motion instead of oblique or contrary motion. A single fifth or octave approached this way is sometimes called an exposed fifth or exposed octave. Conventional style dictates that such a progression be avoided; but it is sometimes permitted under certain conditions, such as the following: the interval does not involve either the highest or the lowest part, the interval does not occur between both of those extreme parts, the interval is approached in one part by a semitone step, or the interval is approached in the higher part by step. The details differ considerably from period to period, and even among composers writing in the same period.

An important acceptable case of hidden fifths in the common practice period are horn fifths. Horn fifths arise from the limitation of valveless brass instruments to the notes of the harmonic series (hence their name). In all but their extreme high registers, these brass instruments are limited to the notes of the major triad. The typical two-instrument configuration would have the high instrument playing a scalar melody against a lower instrument confined to the notes of the tonic chord. Horn fifths occur when the upper voice is on the first three scale degrees.

Traditional horn fifths actually come in pairs. Begin with the upper instrument on the third scale degree and the lower instrument on the tonic. Then move the upper instrument to the second scale degree and the second instrument down to the fifth of the chord. Because the distance from 5 up to 2 is a perfect fifth, we have just created a hidden fifth by descending motion. The first instrument can then complete its descent to 1 as the lower instrument moves to 3. The second hidden fifth of the pair is obtained by making the upward maneuver a mirror image of the downward maneuver. The reason that these fifths are acceptable is that one would otherwise have to commit the gaffe of doubling the third scale degree at the octave, or else forbid the low instrument from using that degree (therefore giving him only the tonic and fifth to work with). Although traditional horn fifths come in pairs and in passing, the acceptability of horn fifths has been generalized to any situation of hidden fifths where the top voice moves by step.

Special uses and exceptions in early music

Consecutive fifths are typically used to evoke the sound of music in medieval times or exotic places. The use of parallel fifths (or fourths) to refer to the sound of traditional Chinese or other kinds of Eastern music was once commonplace in film scores and songs. Since these passages are an obvious oversimplification and parody of the styles that they seek to evoke, this use of parallel fifths declined during the last half of the 20th century.

In Iceland, the traditional song style known as tvísöngur, "twin-singing", goes back to the Middle Ages and is still taught in schools today. In this style, a melody is sung against itself, typically in parallel fifths.

Georgian music frequently uses parallel fifths, and sometimes parallel major ninths above the fifths. This means that there are two sets of parallel fifths, one directly on top of the other. This is especially prominent in the sacred music of the Guria region, in which the pieces are sung a cappella by men. It is believed that this harmonic style dates from pre-Christian times.

Consecutive fifths (as well as fourths and octaves) are commonly used to mimic the sound of Gregorian plainsong. This practice is well-founded in early European musical traditions. Plainsong was originally sung in unison, not in fifths, but by the ninth century there is evidence that singing in parallel intervals (fifths, octaves, and fourths) commonly ornamented the performance of chant. This is documented in the anonymous ninth-century theory treatises known as Musica enchiriadis and its commentary Scolica enchiriadis. These treatises use Daseian music notation, based on four-note patterns called tetrachords, which easily notates parallel fifths. This notation predates Guido of Arezzo's solmization, which divides the scale into six-note patterns called hexachords, and the modern octave-based staff notation into which Guido's gamut evolved.

Mozart fifths

In Brahms' essay "Octaven und Quinten," he identifies many cases of apparent consecutive fifths in the works of Mozart. Most of the examples he provides involve accompaniment figuration in small note values that moves in parallel fifths with a slower moving bass. The background voice-leading of such progressions is oblique motion, with the consecutive fifths resulting from the ornamentation of the sustaining voice with a chromatic lower neighbor. Such "Mozart Fifths" occur in bar 254-255 of the Act I finale of Così fan Tutte, and in bar 80 of the Act II sextet from Don Giovanni.

Another use of the term "Mozart fifths" results from the non-standard resolution of a German augmented sixth chord in the retransition of the finale of the Jupiter Symphony (bars 222-223). Mozart (and all common-practice composers) almost always resolve German augmented sixth chords to cadential six-four chords to avoid these fifths. The Jupiter example is unique in that Mozart spells the fifth enharmonically (A-flat and d-sharp) as a result of the progression arising from a B-major harmony (presented as a dominant of e-minor). Arnold Schoenberg humorously refers to these as acceptable only because Mozart wrote them.(Schoenberg, Arnold, Theory of Harmony, third edition 1922, trans. Roy Carter, University of California Press, 1978, p. 246). Other theorists have tried to make the case that this resolution of the augmented sixth chord is more frequently acceptable. "The parallel fifths [in the German sixth] arising from the natural progression to the dominant are always considered acceptable, except when occurring between soprano and bass. They are most often seen between tenor and bass. The third degree is, however, frequently tied over as a suspension, or repeated as an appoggiatura, before continuing down to the second degree" (Piston, Walter, Harmony, 5th edition revised DeVoto, Mark, 1987, p. 422). they are called Mozart fifths, because of their use by that composer. However, seeing as the vast majority of German augmented sixth chords in common-practice works resolve to cadential six-four chords to avoid parallel fifths, we can conclude that common-practice composers deemed these fifths undesirable in most situations.

See also

Notes

  1. ^ The term parallel fifths is therefore misleading, because some consecutive fifths occur with contrary motion: from a true uncompounded fifth to a twelfth, for example. If parts move by oblique motion (for example, one part moving from a C to a higher C, and another part repeating a G higher than both of those Cs), the intervals are not considered to differ in the relevant way, so parallel fifths do not occur.
  2. ^ The restriction to independently moving parts is important. It has always been standard to double a part in unison or at the octave, even at several different octaves simultaneously, for the duration of a phrase or beyond. For contrapuntal and harmonic analysis this does not add new parts at all. By convention, common practice sometimes allows more transient parallel octaves, or even fifths, with certain melodic embellishments such as anticipations.(Piston 1987, pp. 306–312.)
  3. ^ The traditional terms for these progressions are as vague and variable as the traditional rules that govern them.

Sources

  1. ^ a b c Benward & Saker (2003). Music in Theory and Practice, Vol. I, p.155. ISBN 978-0-07-294262-0.
  2. ^ Kostka & Payne (1995). Tonal Harmony, p.84. Third Edition. ISBN 0-07-300056-6.
  3. ^ Tovey, Donald Francis. Essays in musical analysis, vol. 1, p. 142. Quoted in van der Merwe, Peter (1989). Origins of the Popular Style: The Antecedents of Twentieth-Century Popular Music, p. 210. Oxford: Clarendon Press. ISBN 0-19-316121-4.
  4. ^ Piston, Walter, Harmony, 5th edition revised DeVoto, Mark, 1987, pp. 309–312, 477–480. ISBN 9780393954807.
  5. ^ Kosta & Payne (1995), p.85.
  6. ^ Piston (1987), p. 32.

Further reading

External links