A bailer in hydrogeology is a hollow tube used to retrieve groundwater samples from monitoring wells. Groundwater monitoring wells are drilled in areas where there are underground storage tanks or where there is environmental remediation occurring. The wells are typically built out of PVC casing which is slotted to allow groundwater to flow freely through the well. Bailers are tied to a piece of rope (usually made from nylon or polypropylene) or a piece of wire (composed of Teflon or stainless steel) and lowered into the water column. Once lowered, the bailer uses a simple ball check valve to seal at the bottom in order to pull up a sample of the groundwater table. Bailers can be disposable or reusable, and they are made out of polyethylene, PVC, FEP or stainless steel.
There are advantages and disadvantages to using bailers for groundwater sampling. Bailers are simple devices to use and are relatively inexpensive. Disposable bailers are usually cleaned to United States Environmental Protection Agency specifications and individually packaged to protect sample integrity. In addition, bailers can be lowered to any depth while pumps have sharp limitations on the depth of the well. The main drawback of using bailers is aeration of the water as the sample is obtained, which could release volatile organic compounds that need to be tested. Also, if there is a high amount of sediment or turbidity, this may interfere with the ball check valve seating correctly.
The term “bailer” is also used colloquially in British English to refer to someone who reneges on a commitment, e.g. “Sarah D bailed on going to Spain. Sarah D is a bailer”. The term is also used less formally in British English to describe someone who is unreliable or is less than trustworthy, e.g. "I wouldn't ask Sarah to do that, Sarah is a bailer".