| Air Assault Badge | |
|---|---|
| Awarded by United States Army | |
| Type | Badge |
| Awarded for | Air Assault training course |
| Status | Currently awarded |
| Statistics | |
| Established | 1974 |
| Last awarded | Ongoing |
| Precedence | |
| Next (higher) | (Group 3 badges) Astronaut, EOD, Aviator, Flight Surgeon |
| Equivalent | (Group 4 badges) Pathfinder, Parachutist, Military Freefall Parachutist |
| Next (lower) | (Group 5 badges) Diving, Driver and Mechanic, Rigger |
The Air Assault Badge[1] is awarded by the U.S. Army for successful completion of the Air Assault School, a two-week (ten-day) course. The course includes three phases of instruction involving U.S. Army rotary wing aircraft: combat air assault operations; rigging and slingload operations; and rappelling from a helicopter.
According to the U.S. Army Institute of Heraldry, "The Air Assault Badge was approved by the Chief of Staff, Army, on 18 January 1978, for Army-wide wear by individuals who successfully completed Air Assault training after 1 April 1974. The badge had previously been approved as the Airmobile Badge authorized for local wear by the Commander of the 101st Airborne Division, effective 1 April 1974."[2] The division had been reorganized from parachute to airmobile in mid-1968 in Vietnam and designated the 101st Airborne Division (Airmobile). The parenthetical designation changed to Air Assault on 4 October 1974 and the name of the badge was likewise changed.[3]
Contents |
Formal air assault training has been conducted at Fort Campbell, Kentucky by the 101st Airborne Division (Air Assault) since the Air Assault School was formed in 1974. During the early stages of the occupation of Iraq in late 2003, the division conducted a course in-theater to maintain Air Assault proficiency.[4]
Air Assault training is also offered by the Army National Guard (ARNG) Warrior Training Center[5] at Fort Benning, which conducts training both at the post and at a variety of other locations throughout the United States[6] by means of Mobile Training Teams.
Air assault training has also been offered over the years on either a continual or occasional basis at other locations, to include (but not limited to):
Most of these locations no longer run air assault courses.
The wear of the Air Assault Badge on Army uniforms is governed by AR 670-1, Wear and Appearance of Army Uniforms.[23]
Vietnam veterans of the 101st Airborne Division and 1st Air Cavalry Division have sought the retroactive award of the Air Assault Badge for their training and pioneering experience in combat, but the Army has yet to grant their request.[24]
An article in the Army Times dated 16 March 1981 featured a picture of an officer holding a set of Air Assault wings about a foot wide and included the paragraph below:
"Badge Designer: When he designed a badge for the 101st Abn Div in Vietnam in 1971, Maj. Jack R. Rickman thought that was the end of a project assigned by the division operations officer. Years later he recognized his design as the Air Assault Badge, which the Army adopted officially in January 1978. Rickman, who will retire from the Army in April, never earned the badge himself."
The design was influenced by the Parachutist Badge[25] worn when the division was on jump status, as well as the Glider Badge[26] worn by glider units during World War II. Charles Bloodworth, a pathfinder officer in the 101st during the early 1970s, wrote, "Locally designed and fabricated, the badge was deliberately crafted to mimic the glider wings of WWII. The nose of the Huey took the place of the glider body, and the horizontal rotor blade was the spitting image of the glider wing."[27]
When the 101st returned from Vietnam to Fort Campbell, Kentucky, the 173rd Airborne Brigade was inactivated and its assets used to form the division's 3rd Brigade, which was on jump status. The remainder of the division was organized as Airmobile. In February 1974, Major General Sidney B. Berry, Commanding General, signed Division General Order 179 authorizing the wear of the Airmobile Badge. Concurrently it was announced that the 3rd Brigade would terminate its jump status effective 1 April 1974, the same date on which the Airmobile Badge would be authorized.[28]
Bloodworth describes the transition of the post-war division to fully Air Assault and the adoption of the Air Assault Badge at this link.[2]
When the 101st adopted Air Assault wings, it also adopted their wear with the cloth wing background trimmings (ovals) previously worn behind Parachute wings. According to AR 670-1, Wear and Appearance of Army Uniforms and Insignia, "a background trimming is authorized for organizations designated (by structure, equipment and mission) 'Airborne' or 'Air Assault' by HQ DA. Qualified personnel are authorized to wear the background trimming with the Parachutist or Air Assault badges."[29] The following are wing trimmings worn by air assault qualified members of air assault units. These trimmings below are only the ones currently featured on the U.S. Army's Institute of Heraldry (TIOH) website and do not represent all of the trimmings authorized.
Numerous units in the Army National Guard, such as the California ARNG's 1st Battalion, 184th Infantry Regiment[42]carry the parenthetical designation “Air Assault,” but the Institute of Heraldry has denied them the authorization to wear trimmings behind their Air Assault wings.
A letter dated 1 April 2004 from Colonel Paris M. Mack, Chief, R&R Task Force, Office of the Deputy Chief of Staff G-1 to Lieutenant Colonel Steven Goff, Commander, 1st Battalion, 184th Infantry, states “current policy requires units to be designated as Airborne or Air Assault for Soldiers to be authorized the wear of the background trimming insignia on their service uniform. Force structure developers within Headquarters, Department of the Army, utilized the Air Assault Modified Table of Organization and Equipment (MTOE) when documenting your unit’s structure. Accordingly, the use of the Air Assault MTOE template for your organization was intended to provide Combatant Commanders a more ‘robust’ infantry structure, not to increase the number of air assault units in our Army today. Therefore, your MTOE narrative does not designate an air assault mission to your unit, nor does the current document provide the full resources normally authorized a designated Air Assault organization. Granting your request is not in keeping with the intent for which the organization was initially created; thus your request is denied.”
On 7 February 1963 the colors of the 11th Airborne Division were reactivated at Fort Benning, GA, as the 11th Air Assault Division (Test). The 11th was a small unit, never intended for deployable status, used to test the airmobile concept then under development. Units of the 2nd Infantry Division, also located at Fort Benning, were “borrowed” for large-scale airmobile tests and maneuvers.
An earlier Air Assault Badge [3], pictured on the right, was worn in the early 1960s by troops of 11th who qualified for it by making three helicopter rappels from 60 feet (18 m) and three from 120 feet (37 m). Soldiers were also required to be knowledgeable of aircraft safety procedures; familiar with aircraft orientation; proficient in hand and arm signals and combat assault operations; able to prepare, inspect and rig equipment for external sling loads; and able to lash down equipment inside helicopters. The badge was first awarded in early 1964 and was only authorized for wear by soldiers within the 11th, as it was a division award and not authorized for Army-wide wear by the Department of the Army.[43]
On 30 June 1965 the colors of the 11th Air Assault Division were inactivated and its assets merged with the 2nd Infantry Division to become the 1st Cavalry Division (Airmobile). The colors of the 2nd Infantry Division were sent to Korea, where the existing 1st Cavalry Division was reflagged as 2nd Infantry Division and the colors of the 1st Cavalry Division sent to Fort Benning. Shortly thereafter the 1st Cavalry Division (Airmobile) was sent to Vietnam.
All of the military services can and have sent personnel to Air Assault School; however, only the Air Force allows for the wear of the Air Assault Badge on uniforms, and only under limited conditions. The latest edition of AFI 36-2903[44] states, "Authorized permanent wear of black US Army Air Assault badge on the BDUs only, regardless of duty assignment. Air Force members are authorized to wear badge upon graduation from Air Assault school." The AFI also states the "badge is not authorized for wear on the ABU," and "Upon Permanent Change of Station (PCS) to an Air Force unit, wear of the Army Air Assault badge is optional."
|
||||||||||||||||||||||||||