Autoregressive–moving-average model

For other uses of ARMA, see Arma.

In statistics and signal processing, autoregressive–moving-average (ARMA) models, sometimes called Box–Jenkins models after the iterative Box–Jenkins methodology usually used to estimate them, are typically applied to autocorrelated time series data.

Given a time series of data Xt, the ARMA model is a tool for understanding and, perhaps, predicting future values in this series. The model consists of two parts, an autoregressive (AR) part and a moving average (MA) part. The model is usually then referred to as the ARMA(p,q) model where p is the order of the autoregressive part and q is the order of the moving average part (as defined below).

Contents

Autoregressive model

Main article: Autoregressive model

The notation AR(p) refers to the autoregressive model of order p. The AR(p) model is written

X_t = c %2B \sum_{i=1}^p \varphi_i X_{t-i}%2B \varepsilon_t .\,

where \varphi_1, \ldots, \varphi_p are the parameters of the model, c is a constant and \varepsilon_t is white noise. The constant term is omitted by many authors for simplicity.

An autoregressive model is essentially an all-pole infinite impulse response filter with some additional interpretation placed on it.

Some constraints are necessary on the values of the parameters of this model in order that the model remains stationary. For example, processes in the AR(1) model with |φ1| ≥ 1 are not stationary.

Moving-average model

Main article: Moving-average model

The notation MA(q) refers to the moving average model of order q:

X_t = \mu %2B \varepsilon_t %2B \sum_{i=1}^q \theta_i \varepsilon_{t-i}\,

where the θ1, ..., θq are the parameters of the model, μ is the expectation of X_t (often assumed to equal 0), and the \varepsilon_t, \varepsilon_{t-1},... are again, white noise error terms. The moving-average model is essentially a finite impulse response filter with some additional interpretation placed on it.

Autoregressive–moving-average model

The notation ARMA(p, q) refers to the model with p autoregressive terms and q moving-average terms. This model contains the AR(p) and MA(q) models,

X_t = c %2B \varepsilon_t %2B \sum_{i=1}^p \varphi_i X_{t-i} %2B \sum_{i=1}^q \theta_i \varepsilon_{t-i}.\,

Note about the error terms

The error terms \varepsilon_t are generally assumed to be independent identically-distributed random variables (i.i.d.) sampled from a normal distribution with zero mean: \varepsilon_t ~ N(0,σ2) where σ2 is the variance. These assumptions may be weakened but doing so will change the properties of the model. In particular, a change to the i.i.d. assumption would make a rather fundamental difference.

Specification in terms of lag operator

In some texts the models will be specified in terms of the lag operator L. In these terms then the AR(p) model is given by

\varepsilon_t = \left(1 - \sum_{i=1}^p \varphi_i L^i\right) X_t = \varphi X_t\,

where \varphi represents the polynomial

\varphi = 1 - \sum_{i=1}^p \varphi_i L^i.\,

The MA(q) model is given by

X_t = \left(1 %2B \sum_{i=1}^q \theta_i L^i\right) \varepsilon_t = \theta \varepsilon_t , \,

where θ represents the polynomial

\theta= 1 %2B \sum_{i=1}^q \theta_i L^i .\,

Finally, the combined ARMA(p, q) model is given by

\left(1 - \sum_{i=1}^p \varphi_i L^i\right) X_t = \left(1 %2B \sum_{i=1}^q \theta_i L^i\right) \varepsilon_t \, ,

or more concisely,

\varphi X_t = \theta \varepsilon_t \, .

Alternative notation

Some authors, including Box, Jenkins & Reinsel[1] use a different convention for the autoregression coefficients. This allows all the polynomials involving the lag operator to appear in a similar form throughout. Thus the ARMA model would be written as

\left(1 %2B \sum_{i=1}^p \phi_i L^i\right) X_t = \left(1 %2B \sum_{i=1}^q \theta_i L^i\right) \varepsilon_t \, .

Fitting models

ARMA models in general can, after choosing p and q, be fitted by least squares regression to find the values of the parameters which minimize the error term. It is generally considered good practice to find the smallest values of p and q which provide an acceptable fit to the data. For a pure AR model the Yule-Walker equations may be used to provide a fit.

Finding appropriate values of p and q in the ARMA(p,q) model can be facilitated by plotting the partial autocorrelation functions for an estimate of p, and likewise using the autocorrelation functions for an estimate of q. Further information can be gleaned by considering the same functions for the residuals of a model fitted with an initial selection of p and q.

Brockwell and Davis[2] (p.273) recommend using AICc for finding p and q.

Implementations in statistics packages

Applications

ARMA is appropriate when a system is a function of a series of unobserved shocks (the MA part) as well as its own behavior. For example, stock prices may be shocked by fundamental information as well as exhibiting technical trending and mean-reversion effects due to market participants.

Generalizations

The dependence of Xt on past values and the error terms εt is assumed to be linear unless specified otherwise. If the dependence is nonlinear, the model is specifically called a nonlinear moving average (NMA), nonlinear autoregressive (NAR), or nonlinear autoregressive–moving-average (NARMA) model.

Autoregressive–moving-average models can be generalized in other ways. See also autoregressive conditional heteroskedasticity (ARCH) models and autoregressive integrated moving average (ARIMA) models. If multiple time series are to be fitted then a vector ARIMA (or VARIMA) model may be fitted. If the time-series in question exhibits long memory then fractional ARIMA (FARIMA, sometimes called ARFIMA) modelling may be appropriate: see Autoregressive fractionally integrated moving average. If the data is thought to contain seasonal effects, it may be modeled by a SARIMA (seasonal ARIMA) or a periodic ARMA model.

Another generalization is the multiscale autoregressive (MAR) model. A MAR model is indexed by the nodes of a tree, whereas a standard (discrete time) autoregressive model is indexed by integers.

Note that the ARMA model is a univariate model. Extensions for the multivariate case are the Vector Autoregression (VAR) and Vector Autoregression Moving-Average (VARMA).

Autoregressive–moving-average model with exogenous inputs model (ARMAX model)

The notation ARMAX(p, q, b) refers to the model with p autoregressive terms, q moving average terms and b exogenous inputs terms. This model contains the AR(p) and MA(q) models and a linear combination of the last b terms of a known and external time series d_t. It is given by:

X_t = \varepsilon_t %2B \sum_{i=1}^p \varphi_i X_{t-i} %2B \sum_{i=1}^q \theta_i \varepsilon_{t-i} %2B \sum_{i=1}^b \eta_i d_{t-i}.\,

where \eta_1, \ldots, \eta_b are the parameters of the exogenous input d_t.

Some nonlinear variants of models with exogenous variables have been defined: see for example Nonlinear autoregressive exogenous model.

Statistical packages implement the ARMAX model through the use of "exogenous" or "independent" variables. Care must be taken when interpreting the output of those packages, because the estimated parameters usually (for example, in R[4] and gretl) refer to the regression:

X_t - m_t = \varepsilon_t %2B \sum_{i=1}^p \varphi_i (X_{t-i} - m_{t-i}) %2B \sum_{i=1}^q \theta_i \varepsilon_{t-i}.\,

where mt incorporates all exogenous (or independent) variables:

m_t = c %2B \sum_{i=1}^b \eta_i d_{t-i}.\,

See also

References

  1. ^ George Box, Gwilym M. Jenkins, and Gregory C. Reinsel. Time Series Analysis: Forecasting and Control, third edition. Prentice-Hall, 1994.
  2. ^ Brockwell, P.J., and Davis, R.A. Time Series: Theory and Methods, 2nd ed. Springer, 2009.
  3. ^ Time series features in Mathematica
  4. ^ ARIMA Modelling of Time Series, R documentation