125 mm smoothbore ammunition

The following is a list of ammunition fired by 125 mm Smoothbore guns series used in the T-64, T-72, T-80, M-84 and T-90 tanks as well as the 2A45 Sprut Anti-Tank gun.

Contents

APFSDS-T

Armour-piercing fin-stabilized discarding sabot or APFSDS rounds. Typically used against other modern tanks.

3VBM3/3BM9/10

Entered service in 1962. The projectile is Maraging steel.

3VBM6/3BM12/13

Entered service (estimated) in 1968. Essentially the same as the 3BM9 projectile with a tungsten-carbide plug.

3VBM7/3BM15/16

Entered service (estimated 1972). A slightly longer 3BM12 projectile.

3VBM8/3BM17/18

Entered service (estimated 1972). An export version of the 3BM-15 without the tungsten carbide plug.

3VBM9/3BM22/23

Entered service 1976. Tungsten carbide penetrator core sheathed in steel.

3VBM10/3BM29/30

Entered service 1982. Depleted Uranium-nickel-iron alloy sheathed in steel.

3VBM11/3BM26/27

Entered service 1983. Tungsten-nickel-iron alloy core sheathed in steel.

3VBM13/3BM32/33

Entered service in 1985. The projectile is a depleted uranium-nickel-zinc alloy, sheathed in steel.

3VBM17/3BM42 (3BM44)

Entered service in 1986. The projectile is a tungsten alloy core sheathed in steel.

3VBM19/3BM42M (3BM44M)

Entered service in 1994 Utilising an improved penetrator and a new Sabot. Reported to be tungsten alloy.

3VBM??/3BM46 (3BM48 "Svinets")

Entered service in 1991 Utilising a new Sabot. Reported to be Uranium alloy.

3VBM??/3BM46 (3BM48 "Свинец-2")

Entered service : Unknown. Utilising a new Sabot. Reported to be tungsten alloy.

HEAT-FS

High-explosive anti-tank fin stabilised or HEAT-FS rounds. Typically used against lighter or older tanks and Armoured personnel carriers.

3VBK7/3BK12

Entered service 1962.

3BK12M

Entered service 1968. Uses improved 3V-15 detonator.

3VBK10/3BK14

Entered service 1968.

3BK14M

Improved version, replacing steel liner with a copper liner [3].

3VBK16/3BK18

Entered service estimated 1975.

3BK18M

Improved warhead. Entered service estimated 1978. Introduces wave shaping booster.

3VBK17/3BK21

Entered service estimated 1980. Enhancements to improve reliability of the copper jet formation.

3BK21B

Entered service estimated 1982. Depleted uranium Liner to enhance penetration of advanced composite armours like Chobham.

3VBK21/3BK25

Entered service estimated 1985.

3VBK25/3BK29

Entered service estimated 1988.

An experimental HEAT round that is obviously in close relationship with 3BK29 was displayed on VTTV-97 exhibition in Omsk. Its cutaway shows a very complex and ingenious design, including shaped-charge precursor, the channel through the middle charge to allow passage of the rear jet and so on. The round is credited with 800mm RHA penetration which was illustrated by a picture of a 800mm penetration route. The picture shows that designers probably deliberately misaligned the charges so that the middle jet doesn't need to penetrate the core of the rear one. If the color of the liner is the same as that on the real round, it indicates that it is not copper, and therefore may have a significantly improved performance against ceramic armors. [5].

3VBK27?/3BK29M

First seen publicly in 1998. Reportedly a triple charge warhead [4].

HE-FRAG-FS

High Explosive Fragmentation Fin Stabilised. General purpose rounds, for use against infantry, bunkers and light vehicles and other 'soft' targets.

3VOF22/3OF19

Entered service in 1962. Uses the 3V-21 detonator (mass = 0.431 kg, reliability = 0.98). The 90% lethal zone for infantry is reported to be 40 m wide and 20 m deep [3].

3VOF36/3OF26

Entered service in 1970. Uses the 3V-21 detonator (mass = 0.431 kg, reliability = 0.98). The projectile creates between 600 and 2,000 fragments.

See also

References

External links