Robotics

Robotics is the engineering science and technology of robots, and their design, manufacture, application, and structural disposition. Robotics is related to electronics, mechanics, and software.^[1] The word robot was introduced to the public by Czech writer Karel Čapek in his play R.U.R. (Rossum's Universal Robots), published in 1920. The term "robotics" was coined by Isaac Asimov in his 1941 science fiction short-story "Liar!"^[2]

Contents 1 History 2 Etymology 3 Components of robots 3.1 Structure 3.2 Power source 3.3 Actuation 3.4 Sensing 3.4.1 Touch 3.4.2 Vision 3.5 Manipulation 3.6 Locomotion 3.6.1 Rolling robots 3.6.2 Walking robots 3.6.3 Other methods of locomotion 3.7 Environmental interaction and navigation 3.8 Human-robot interaction 4 Control 4.1 Autonomy levels 5 Dynamics and kinematics 6 Robot research 7 Education and training 7.1 Career Training 7.2 Certification 8 Employment in robotics 9 Healthcare 10 See also 11 Notes 12 References 13 Further reading 14 External links

History

Stories of artificial helpers and companions and attempts to create them have a long history.

In 1837, the story of the Golem of Prague, an humanoid artificial intelligence activated by inscribing Hebrew letters on its forehead, based on Jewish folklore, was created by Jewish German writer Berthold Auerbach for his novel Spinoza.

In 1921, Czech writer Karel Čapek introduced the word "robot" in his play R.U.R. (Rossum's Universal Robots). The word "robot" comes from the word "robota", meaning, in Czech, "forced labour, drudgery". [1]

In 1927, the Maschinenmensch (“machine-human”), a gynoid humanoid robot, also called "Parody", "Futura", "Robotrix", or the "Maria impersonator" (played by German actress Brigitte Helm), the first and perhaps the most memorable depiction of a robot ever to appear on film, was depicted in Fritz Lang's film Metropolis.

In 1942, Isaac Asimov formulated the Three Laws of Robotics, and in the process of doing so, coined the word "robotics" (see details in "Etymology" section below).

In 1948, Norbert Weiner formulated the principles of cybernetics, the basis of practical robotics.

Fully autonomous robots only appeared in the second half of the 20th century. The first digitally operated and programmable robot, the Unimate, was installed in 1961 to lift hot pieces of metal from a die casting machine and stack them. Today, commercial and industrial robots are in widespread use performing jobs more cheaply or more accurately and reliably than humans. They are also employed in jobs which are too dirty, dangerous, or dull to be suitable for humans. Robots are widely used in manufacturing, assembly, and packing; transport; earth and space exploration; surgery; weaponry; laboratory research; safety; and mass production of consumer and industrial goods.^[3]

Date	Significance	Robot Name	Inventor
First century A.D. and earlier	Descriptions of more than 100 machines and automata, including a fire engine, a wind organ, a coin-operated machine, and a steam-powered engine, in Pneumatica and Automata by Heron of Alexandria		Ctesibius, Philo of Byzantium, Heron of Alexandria, and others
1206	Created early humanoid automata, programmable automaton band[4]	Robot band, hand-washing automaton[5] , automated moving peacocks[6]	Al-Jazari
1495	Designs for a humanoid robot	Mechanical knight	Leonardo da Vinci
1738	Mechanical duck that was able to eat, flap its wings, and excrete	Digesting Duck	Jacques de Vaucanson
1898	Nikola Tesla demonstrates first radio-controlled vessel.	Teleautomaton	Nikola Tesla
1921	First fictional automatons called "robots" appear in the play R.U.R.	Rossum's Universal Robots	Karel Čapek
1930s	Humanoid robot exhibited at the 1939 and 1940 World's Fairs	Elektro	Westinghouse Electric Corporation
1948	Simple robots exhibiting biological behaviors[7]	Elsie and Elmer	William Grey Walter
1956	First commercial robot, from the Unimation company founded by George Devol and Joseph Engelberger, based on Devol's patents[8]	Unimate	George Devol
1961	First installed industrial robot.	Unimate	George Devol
1963	First palletizing robot[9]	Palletizer	Fuji Yusoki Kogyo
1973	First industrial robot with six electromechanically driven axes[10]	Famulus	KUKA Robot Group
1975	Programmable universal manipulation arm, a Unimation product	PUMA	Victor Scheinman

Etymology

According to the Oxford English Dictionary, the word robotics was first used in print by Isaac Asimov, in his science fiction short story "Liar!", published in May 1941 in Astounding Science Fiction. Asimov was unaware that he was coining the term; since the science and technology of electrical devices is electronics, he assumed robotics already referred to the science and technology of robots. However, in some of Asimov's other works, he states that the first use of the word robotics was in his short story Runaround (Astounding Science Fiction, March 1942).^[11][12] The word robotics was derived from the word robot, which was introduced to the public by Czech writer Karel Čapek in his play R.U.R. (Rossum's Universal Robots), which premiered in 1921.^[13]

Components of robots

Structure

The structure of a robot is usually mostly mechanical and can be called a kinematic chain (its functionality being similar to the skeleton of the human body). The chain is formed of links (its bones), actuators (its muscles), and joints which can allow one or more degrees of freedom. Most contemporary robots use open serial chains in which each link connects the one before to the one after it. These robots are called serial robots and often resemble the human arm. Some robots, such as the Stewart platform, use a closed parallel kinematical chain. Other structures, such as those that mimic the mechanical structure of humans, various animals, and insects, are comparatively rare. However, the development and use of such structures in robots is an active area of research (e.g. biomechanics). Robots used as manipulators have an end effector mounted on the last link. This end effector can be anything from a welding device to a mechanical hand used to manipulate the environment.

Power source

At present; mostly (lead-acid) batteries are used, but potential power sources could be:

• pneumatic (compressed gases)
• hydraulics (compressed liquids)
• flywheel energy storage
• organic garbage (through anaerobic digestion)
• faeces (human, animal); may be interesting in a military context as feces of small combat groups may be reused for the energy requirements of the robot assistant (see DEKA's project Slingshot stirling engine on how the system would operate)
• still untested energy sources (e.g. Nuclear Fusion reactors, ...)
• radioactive source (such as with the proposed Ford car of the '50s); to those proposed in movies such as Red Planet

Actuation

Actuators are like the "muscles" of a robot, the parts which convert stored energy into movement. By far the most popular actuators are electric motors that spin a wheel or gear, and linear actuators that control industrial robots in factors. But there are some recent advances in alternative types of actuators, powered by electricity, chemicals, or compressed air:

• Electric motors: The vast majority of robots use electric motors, often brushed and brushless DC motors in portable robots or AC motors in industrial robots and CNC machines.
• Linear Actuators: Various types of linear actuators move in and out instead of by spinning, particularly when very large forces are needed such as with industrial robotics. They are typically powered by compressed air (pneumatic actuator) or an oil (hydraulic actuator).
• Series Elastic Actuators: A spring can be designed as part of the motor actuator, to allow improved force control. It has been used in various robots, particularly walking humanoid robots.^[14]
• Air muscles: (Also known as Pneumatic Artificial Muscles) are special tubes that contract (typically up to 40%) when air is forced inside it. They have been used for some robot applications.^[15][16]
• Muscle wire: (Also known as Shape Memory Alloy, Nitinol or Flexinol Wire) is a material that contracts slightly (typically under 5%) when electricity is run through it. They have been used for some small robot applications^[17][18].
• Electroactive Polymers: (EAPs or EPAMs) are a new plastic material that can contract quite significantly (up to 400%) from electricity, and have been used in facial muscles and arms of humanoid robots^[19], and to allow new robots to float^[20], fly, swim or walk^[21].
• Piezo motor: A recent alternative to DC motors are piezo motors or ultrasonic motors. These work on a fundamentally different principle, whereby tiny piezoceramic elements, vibrating many thousands of times per second, cause linear or rotary motion. There are different mechanisms of operation; one type uses the vibration of the piezo elements to walk the motor in a circle or a straight line.^[22] Another type uses the piezo elements to cause a nut to vibrate and drive a screw. The advantages of these motors are nanometer resolution, speed, and available force for their size.^[23] These motors are already available commercially, and being used on some robots.^[24][25]
• Elastic nanotubes: These are a promising, early-stage experimental technology. The absence of defects in nanotubes enables these filaments to deform elastically by several percent, with energy storage levels of perhaps 10 J/cm³ for metal nanotubes. Human biceps could be replaced with an 8 mm diameter wire of this material. Such compact "muscle" might allow future robots to outrun and outjump humans.^[26]

Sensing

Touch

Current robotic and prosthetic hands receive far less tactile information than the human hand. Recent research has developed a tactile sensor array that mimics the mechanical properties and touch receptors of human fingertips.^[27][28] The sensor array is constructed as a rigid core surrounded by conductive fluid contained by an elastomeric skin. Electrodes are mounted on the surface of the rigid core and are connected to an impedance-measuring device within the core. When the artificial skin touches an object the fluid path around the electrodes is deformed, producing impedance changes that map the forces received from the object. The researchers expect that an important function of such artificial fingertips will be adjusting robotic grip on held objects.

In 2009, scientists from several European countries and Israel developed a prosthetic hand, called SmartHand, which functions like a real one, allowing patients to write with it, type on a keyboard, play piano and perform other fine movements. The prosthesis has sensors which enable the patient to sense real feeling in its fingertips.^[29]

Vision

Computer vision is the science and technology of machines that see. As a scientific discipline, computer vision is concerned with the theory behind artificial systems that extract information from images. The image data can take many forms, such as video sequences and views from cameras.

In most practical computer vision applications, the computers are pre-programmed to solve a particular task, but methods based on learning are now becoming increasingly common.

Computer vision systems rely on image sensors which detect electromagnetic radiation which is typically in the form of either visible light or infra-red light. The sensors are designed using solid-state physics. The process by which light propagates and reflects off surfaces is explained using optics. Sophisticated image sensors even require quantum mechanics to provide a complete understanding of the image formation process.

There is a subfield within computer vision where artificial systems are designed to mimic the processing and behavior of biological systems, at different levels of complexity. Also, some of the learning-based methods developed within computer vision have their background in biology.

Manipulation

Robots which must work in the real world require some way to manipulate objects; pick up, modify, destroy, or otherwise have an effect. Thus the 'hands' of a robot are often referred to as end effectors,^[30] while the arm is referred to as a manipulator.^[31] Most robot arms have replaceable effectors, each allowing them to perform some small range of tasks. Some have a fixed manipulator which cannot be replaced, while a few have one very general purpose manipulator, for example a humanoid hand.

• Mechanical Grippers: One of the most common effectors is the gripper. In its simplest manifestation it consists of just two fingers which can open and close to pick up and let go of a range of small objects. Fingers can for example be made of a chain with a metal wire run trough it.^[32] See Shadow Hand.
• Vacuum Grippers: Pick and place robots for electronic components and for large objects like car windscreens, will often use very simple vacuum grippers. These are very simple astrictive^[33] devices, but can hold very large loads provided the prehension surface is smooth enough to ensure suction.
• General purpose effectors: Some advanced robots are beginning to use fully humanoid hands, like the Shadow Hand, MANUS,^[34] and the Schunk hand.^[35] These highly dexterous manipulators, with as many as 20 degrees of freedom and hundreds of tactile sensors.^[36]

For the definitive guide to all forms of robot endeffectors, their design, and usage consult the book "Robot Grippers".^[37]

Locomotion

Rolling robots

For simplicity, most mobile robots have four wheels. However, some researchers have tried to create more complex wheeled robots, with only one or two wheels. These can have certain advantages such as greater efficiency, reduced parts, and allow a robot to navigate in tight places that a four wheeled robot would not be able to.

• Two-wheeled balancing: Balancing robots generally use a Gyroscope to detect how much a robot is falling and then drive the wheels proportionally in the opposite direction, to counter-balance the fall at hundreds of times per second, based on the dynamics of an inverted pendulum^[38]. Many different balancing robots have been designed^[39]. While the Segway is not commonly thought of as a robot, it can be thought of as a component of a robot, such as NASA's Robonaut that has been mounted on a Segway.^[40]
• One-wheeled balancing: A one-wheeled balancing robot is an extension of a two-wheeled balancing robot so that it can move in any 2D direction using a round ball as its only wheel. Several one-wheeled balancing robots have been designed recently, such as Carnegie Mellon University's "Ballbot" that is the approximate height and width of a person, and Tohoku Gakuin University's "BallIP"^[41]. Because of the long, thin shape and ability to maneuver in tight spaces, they have the potential to function better than other robots in environments with people.^[42]
• Spherical orb robots: Several attempts have been made in robots that are completely inside a spherical ball, either by spinning a weight inside the ball^[43][44], or by rotating the outer shells of the sphere^[45][46]. These have also been referred to as an orb bot ^[47] or a ball bot^[48][49]
• Six-wheeled robots: Using six wheels instead of four wheels can give better traction or grip in outdoor terrain such as on rocky dirt or grass.
• Tracked robots: Tank tracks provide even more traction than a six-wheeled robot. Tracked wheels behave as if they were made of hundreds of wheels, therefore are very common for outdoor and military robots, where the robot must drive on very rough terrain. However, they are difficult to use indoors such as on carpets and smooth floors. Examples include NASA's Urban Robot "Urbie".^[50]

Walking robots

Walking is a difficult and dynamic problem to solve. Several robots have been made which can walk reliably on two legs, however none have yet been made which are as robust as a human. Many other robots have been built that walk on more than two legs, due to these robots being significantly easier to construct.^[51][52] Hybrids too have been proposed in movies such as I, Robot, where they walk on 2 legs and switch to 4 (arms+legs) when going to a sprint. Typically, robots on 2 legs can walk well on flat floors, and can occasionally walk up stairs. None can walk over rocky, uneven terrain. Some of the methods which have been tried are:

• ZMP Technique: The Zero Moment Point (ZMP) is the algorithm used by robots such as Honda's ASIMO. The robot's onboard computer tries to keep the total inertial forces (the combination of earth's gravity and the acceleration and deceleration of walking), exactly opposed by the floor reaction force (the force of the floor pushing back on the robot's foot). In this way, the two forces cancel out, leaving no moment (force causing the robot to rotate and fall over).^[53] However, this is not exactly how a human walks, and the difference is quite apparent to human observers, some of whom have pointed out that ASIMO walks as if it needs the lavatory.^[54][55][56] ASIMO's walking algorithm is not static, and some dynamic balancing is used (See below). However, it still requires a smooth surface to walk on.
• Hopping: Several robots, built in the 1980s by Marc Raibert at the MIT Leg Laboratory, successfully demonstrated very dynamic walking. Initially, a robot with only one leg, and a very small foot, could stay upright simply by hopping. The movement is the same as that of a person on a pogo stick. As the robot falls to one side, it would jump slightly in that direction, in order to catch itself.^[57] Soon, the algorithm was generalised to two and four legs. A bipedal robot was demonstrated running and even performing somersaults.^[58] A quadruped was also demonstrated which could trot, run, pace, and bound.^[59] For a full list of these robots, see the MIT Leg Lab Robots page.
• Dynamic Balancing or controlled falling: A more advanced way for a robot to walk is by using a dynamic balancing algorithm, which is potentially more robust than the Zero Moment Point technique, as it constantly monitors the robot's motion, and places the feet in order to maintain stability.^[60] This technique was recently demonstrated by Anybots' Dexter Robot,^[61] which is so stable, it can even jump.^[62] Another example is the TU Delft Flame.
• Passive Dynamics: Perhaps the most promising approach utilizes passive dynamics where the momentum of swinging limbs is used for greater efficiency. It has been shown that totally unpowered humanoid mechanisms can walk down a gentle slope, using only gravity to propel themselves. Using this technique, a robot need only supply a small amount of motor power to walk along a flat surface or a little more to walk up a hill. This technique promises to make walking robots at least ten times more efficient than ZMP walkers, like ASIMO.^[63][64]

Other methods of locomotion

• Flying: A modern passenger airliner is essentially a flying robot, with two humans to manage it. The autopilot can control the plane for each stage of the journey, including takeoff, normal flight, and even landing.^[65] Other flying robots are uninhabited, and are known as unmanned aerial vehicles (UAVs). They can be smaller and lighter without a human pilot onboard, and fly into dangerous territory for military surveillance missions. Some can even fire on targets under command. UAVs are also being developed which can fire on targets automatically, without the need for a command from a human. Other flying robots include cruise missiles, the Entomopter, and the Epson micro helicopter robot. Robots such as the Air Penguin, Air Ray, and Air Jelly have lighter-than-air bodies, propelled by paddles, and guided by sonar.

• Snaking: Several snake robots have been successfully developed. Mimicking the way real snakes move, these robots can navigate very confined spaces, meaning they may one day be used to search for people trapped in collapsed buildings.^[66] The Japanese ACM-R5 snake robot^[67] can even navigate both on land and in water.^[68]
• Skating: A small number of skating robots have been developed, one of which is a multi-mode walking and skating device, Titan VIII. It has four legs, with unpowered wheels, which can either step or roll.^[69] Another robot, Plen, can use a miniature skateboard or rollerskates, and skate across a desktop.^[70]
• Climbing: Several different approaches have been used to develop robots that have the ability to climb vertical surfaces. One approach mimicks the movements of a human climber on a wall with protrusions; adjusting the center of mass and moving each limb in turn to gain leverage. An example of this is Capuchin,^[71] built by Stanford University, California. Another approach uses the specialised toe pad method of wall-climbing geckoes, which can run on smooth surfaces such as vertical glass. Examples of this approach include Wallbot ^[72] and Stickybot.^[73] China's "Technology Daily" November 15, 2008 reported New Concept Aircraft (ZHUHAI) Co., Ltd. Dr. Li Hiu Yeung and his research group have recently successfully developed the bionic gecko robot "Speedy Freelander".According to Dr. Li introduction, this gecko robot can rapidly climbing up and down in a variety of building walls, ground and vertical wall fissure or walking upside down on the ceiling, it is able to adapt on smooth glass, rough or sticky dust walls as well as the various surface of metallic materials and also can automatically identify obstacles, circumvent the bypass and flexible and realistic movements. Its flexibility and speed are comparable to the natural gecko. A third approach is to mimick the motion of a snake climbing a pole.
• Swimming: It is calculated that when swimming some fish can achieve a propulsive efficiency greater than 90%.^[74] Furthermore, they can accelerate and maneuver far better than any man-made boat or submarine, and produce less noise and water disturbance. Therefore, many researchers studying underwater robots would like to copy this type of locomotion.^[75] Notable examples are the Essex University Computer Science Robotic Fish,^[76] and the Robot Tuna built by the Institute of Field Robotics, to analyze and mathematically model thunniform motion.^[77] The Aqua Penguin, designed and built by Festo of Germany, copies the streamlined shape and propulsion by front "flippers" of penguins. Festo have also built the Aqua Ray and Aqua Jelly, which emulate the locomotion of manta ray, and jellyfish, respectively.

Environmental interaction and navigation

Though a significant percentage of robots in commission today are either human controlled, or operate in a static environment, there is an increasing interest in robots that can operate autonomously in a dynamic environment. These robots require some combination of navigation hardware and software in order to traverse their environment. In particular unforeseen events (e.g. people and other obstacles that are not stationary) can cause problems or collisions. Some highly advanced robots as ASIMO, EveR-1, Meinü robot have particularly good robot navigation hardware and software. Also, self-controlled cars, Ernst Dickmanns' driverless car, and the entries in the DARPA Grand Challenge, are capable of sensing the environment well and subsequently making navigational decisions based on this information. Most of these robots employ a GPS navigation device with waypoints, along with radar, sometimes combined with other sensory data such as LIDAR, video cameras, and inertial guidance systems for better navigation between waypoints.

Human-robot interaction

If robots are to work effectively in homes and other non-industrial environments, the way they are instructed to perform their jobs, and especially how they will be told to stop will be of critical importance. The people who interact with them may have little or no training in robotics, and so any interface will need to be extremely intuitive. Science fiction authors also typically assume that robots will eventually be capable of communicating with humans through speech, gestures, and facial expressions, rather than a command-line interface. Although speech would be the most natural way for the human to communicate, it is quite unnatural for the robot. It will be quite a while before robots interact as naturally as the fictional C-3PO.

• Speech recognition: Interpreting the continuous flow of sounds coming from a human (speech recognition), in real time, is a difficult task for a computer, mostly because of the great variability of speech. The same word, spoken by the same person may sound different depending on local acoustics, volume, the previous word, whether or not the speaker has a cold, etc.. It becomes even harder when the speaker has a different accent.^[78] Nevertheless, great strides have been made in the field since Davis, Biddulph, and Balashek designed the first "voice input system" which recognized "ten digits spoken by a single user with 100% accuracy" in 1952.^[79] Currently, the best systems can recognize continuous, natural speech, up to 160 words per minute, with an accuracy of 95%.^[80]
• Gestures: One can imagine, in the future, explaining to a robot chef how to make a pastry, or asking directions from a robot police officer. On both of these occasions, making hand gestures would aid the verbal descriptions. In the first case, the robot would be recognizing gestures made by the human, and perhaps repeating them for confirmation. In the second case, the robot police officer would gesture to indicate "down the road, then turn right". It is quite likely that gestures will make up a part of the interaction between humans and robots.^[81] A great many systems have been developed to recognize human hand gestures.^[82]
• Facial expression: Facial expressions can provide rapid feedback on the progress of a dialog between two humans, and soon it may be able to do the same for humans and robots. Robotic faces have been constructed by Hanson Robotics using their elastic polymer called Frubber, allowing a great amount of facial expressions due to the elasticity of the rubber facial coating and imbedded subsurface motors (servos) to produce the facial expressions.^[83] The coating and servos are built on a metal skull. A robot should know how to approach a human, judging by their facial expression and body language. Whether the person is happy, frightened, or crazy-looking affects the type of interaction expected of the robot. Likewise, robots like Kismet and the more recent addition, Nexi^[84] can produce a range of facial expressions, allowing it to have meaningful social exchanges with humans.^[85]
• Artificial emotions Artificial emotions can also be imbedded and are composed of a sequence of facial expressions and/or gestures. As can be seen from the movie Final Fantasy: The Spirits Within, the programming of these artificial emotions is quite complex and requires a great amount of human observation. To simplify this programming in the movie, presets were created together with a special software program. This decreased the amount of time needed to make the film. These presets could possibly be transferred for use in real-life robots.
• Personality: Many of the robots of science fiction have a personality, something which may or may not be desirable in the commercial robots of the future.^[86] Nevertheless, researchers are trying to create robots which appear to have a personality:^[87][88] i.e. they use sounds, facial expressions, and body language to try to convey an internal state, which may be joy, sadness, or fear. One commercial example is Pleo, a toy robot dinosaur, which can exhibit several apparent emotions.^[89]

Control

The mechanical structure of a robot must be controlled to perform tasks. The control of a robot involves three distinct phases - perception, processing, and action (robotic paradigms). Sensors give information about the environment or the robot itself (e.g. the position of its joints or its end effector). This information is then processed to calculate the appropriate signals to the actuators (motors) which move the mechanical.

The processing phase can range in complexity. At a reactive level, it may translate raw sensor information directly into actuator commands. Sensor fusion may first be used to estimate parameters of interest (e.g. the position of the robot's gripper) from noisy sensor data. An immediate task (such as moving the gripper in a certain direction) is inferred from these estimates. Techniques from control theory convert the task into commands that drive the actuators.

At longer time scales or with more sophisticated tasks, the robot may need to build and reason with a "cognitive" model. Cognitive models try to represent the robot, the world, and how they interact. Pattern recognition and computer vision can be used to track objects. Mapping techniques can be used to build maps of the world. Finally, motion planning and other artificial intelligence techniques may be used to figure out how to act. For example, a planner may figure out how to achieve a task without hitting obstacles, falling over, etc.

Autonomy levels

Control systems may also have varying levels of autonomy.

1. Direct interaction is used for haptic or tele-operated devices, and the human has nearly complete control over the robot's motion.
2. Operator-assist modes have the operator commanding medium-to-high-level tasks, with the robot automatically figuring out how to achieve them.
3. An autonomous robot may go for extended periods of time without human interaction. Higher levels of autonomy do not necessarily require more complex cognitive capabilities. For example, robots in assembly plants are completely autonomous, but operate in a fixed pattern.

Another classification takes into account the interaction between human control and the machine motions.

1. Teleoperation. A human controls each movement, each machine actuator change is specified by the operator.
2. Supervisory. A human specifies general moves or position changes and the machine decides specific movements of its actuators.
3. Task-level autonomy. The operator specifies only the task and the robot manages itself to complete it.
4. Full autonomy. The machine will create and complete all its tasks without human interaction.

Dynamics and kinematics

The study of motion can be divided into kinematics and dynamics. Direct kinematics refers to the calculation of end effector position, orientation, velocity, and acceleration when the corresponding joint values are known. Inverse kinematics refers to the opposite case in which required joint values are calculated for given end effector values, as done in path planning. Some special aspects of kinematics include handling of redundancy (different possibilities of performing the same movement), collision avoidance, and singularity avoidance. Once all relevant positions, velocities, and accelerations have been calculated using kinematics, methods from the field of dynamics are used to study the effect of forces upon these movements. Direct dynamics refers to the calculation of accelerations in the robot once the applied forces are known. Direct dynamics is used in computer simulations of the robot. Inverse dynamics refers to the calculation of the actuator forces necessary to create a prescribed end effector acceleration. This information can be used to improve the control algorithms of a robot.

In each area mentioned above, researchers strive to develop new concepts and strategies, improve existing ones, and improve the interaction between these areas. To do this, criteria for "optimal" performance and ways to optimize design, structure, and control of robots must be developed and implemented.

Robot research

Much of the research in robotics focuses not on specific industrial tasks, but on investigations into new types of robots, alternative ways to think about or design robots, and new ways to manufacture them but other investigations, such as MIT's cyberflora project, are almost wholly academic.

A first particular new innovation in robot design is the opensourcing of robot-projects. To describe the level of advancement of a robot, the term "Generation Robots" can be used. This term is coined by Professor Hans Moravec, Principal Research Scientist at the Carnegie Mellon University Robotics Institute in describing the near future evolution of robot technology. First generation robots, Moravec predicted in 1997, should have an intellectual capacity comparable to perhaps a lizard and should become available by 2010. Because the first generation robot would be incapable of learning, however, Moravec predicts that the second generation robot would be an improvement over the first and become available by 2020, with an intelligence maybe comparable to that of a mouse. The third generation robot should have an intelligence comparable to that of a monkey. Though fourth generation robots, robots with human intelligence, professor Moravec predicts, would become possible, he does not predict this happening before around 2040 or 2050.^[91]

The second is Evolutionary Robots. This is a methodology that uses evolutionary computation to help design robots, especially the body form, or motion and behavior controllers. In a similar way to natural evolution, a large population of robots is allowed to compete in some way, or their ability to perform a task is measured using a fitness function. Those that perform worst are removed from the population, and replaced by a new set, which have new behaviors based on those of the winners. Over time the population improves, and eventually a satisfactory robot may appear. This happens without any direct programming of the robots by the researchers. Researchers use this method both to create better robots,^[92] and to explore the nature of evolution.^[93] Because the process often requires many generations of robots to be simulated^[94], this technique may be run entirely or mostly in simulation, then tested on real robots once the evolved algorithms are good enough.^[95] Currently, there are about 1 million industrial robots toiling around the world, and Japan is the top country having high density of utilizing robots in its manufacturing industry.^[96]

Education and training

Robots recently became a popular tool in raising interests in computing for middle and high school students. First year computer science courses at several universities were developed which involves the programming of a robot instead of the traditional software engineering based coursework.

Career Training

Universities offer Bachelors and Masters degrees in the field of robotics. Select Private Career Colleges and vocational schools offer robotics training to train individuals towards being job ready and employable in the emerging robotics industry.

Certification

The Robotics Certification Standards Alliance (RCSA) is an international robotics certification authority who confers various industry and educational related robotics certifications.

Employment in robotics

Robotics is an essential component in any modern manufacturing environment. As factories increase their use of robots, the number of robotics related jobs grow and have been observed to be on a steady rise.

Healthcare

Script Pro manufactures a robot designed to help pharmacies fill prescriptions that consist of oral solids or medications in pill form. The pharmacist or pharmacy technician enters the prescription information into its information system. The system, upon determining whether or not the drug is in the robot, will send the information to the robot for filling. The robot has 3 different size vials to fill determined by the size of the pill. The robot technician, user, or pharmacist determines the needed size of the vial based on the tablet when the robot is stocked. Once the vial is filled it is brought up to a conveyor belt that delivers it to a holder that spins the vial and attaches the patient label. Afterwards it is set on another conveyor that delivers the patient’s medication vial to a slot labeled with the patient's name on an LED read out. The pharmacist or technician then checks the contents of the vial to ensure it’s the correct drug for the correct patient and then seals the vials and sends it out front to be picked up. The robot is a very time efficient device that the pharmacy depends on to fill prescriptions.

McKesson’s Robot RX is another healthcare robotics product that helps pharmacies dispense thousands of medications daily with little or no errors. The robot can be ten feet wide and thirty feet long and can hold hundreds of different kinds of medications and thousands of doses. The pharmacy saves many resources like staff members that are otherwise unavailable in a resource scarce industry. It uses an electromechanical head coupled with a pneumatic system to capture each dose and deliver it to its either stocked or dispensed location. The head moves along a single axis while it rotates 180 degrees to pull the medications. During this process it uses barcode technology to verify its pulling the correct drug. It then delivers the drug to a patient specific bin on a conveyor belt. Once the bin is filled with all of the drugs that a particular patient needs and that the robot stocks, the bin is then released and returned out on the conveyor belt to a technician waiting to load it into a cart for delivery to the floor.

See also

• Automatic waste container
• Category:Robotics suites
• Cyberflora
• Future of robotics
• Glossary of robotics
• History of technology
• Industrial robot
• List of emerging robotic technologies
• Microsoft Robotics Studio
• Mobile manipulator
• Mobile Robot Programming Toolkit
• NASA robots
• Open source hardware
• Robot
• Robotics suite
• Whegs

Notes

References

• K. S. Fu & R.C. Gonzalez & C.S.G. Lee, Robotics: Control, Sensing, Vision, and Intelligence (CAD/CAM, robotics, and computer vision)
• C.S.G. Lee & R.C. Gonzalez & K.S. Fu, Tutorial on robotics
• “SP200 With Open Control Center. Robotic Prescription Dispensing System”, accessed November 22, 2008.
• “McKesson Empowering HealthCare. Robot RX”, accessed November 22, 2008.
• “Aethon. You Deliver the Care. TUG Delivers the Rest”, accessed November 22, 2008.
• Marco Ceccarelli, "Fundamentals of Mechanics of Robotic Manipulators"

Further reading

• Journal of Field Robotics
• Robotics education website
• R. Andrew Russell (1990). Robot Tactile Sensing. New York: Prentice Hall. ISBN 0-13-781592-1 

External links

• Robotics video tutorial