Coke (fuel)
Coke is the solid carbonaceous material derived from destructive distillation of low-ash, low-sulfur bituminous coal. Cokes from coal are grey, hard, and porous.
Contents |
Production
Coke is usually produced from coal; the process is called coking. Volatile constituents of the coal—including water, coal-gas, and coal-tar—are driven off by baking in an airless furnace or oven at temperatures as high as 2,000 degrees Celsius. This fuses together the fixed carbon and residual ash. Most modern facilities have "by-product" coking ovens. Today, the volatile hydrocarbons are mainly used, after purification, in a separate combustion process to generate energy. Non by-product coking furnaces or coke furnaces (ovens) burn the hydrocarbon gases produced by the coke-making process to drive the carbonization process.
Bituminous coal must meet a set of criteria for use as coking coal, determined by particular coal assay techniques. These include moisture content, ash content, sulfur content, volatile content, tar, and plasticity.
The greater the volatile matter in coal, the more by-product can be produced, but too low or too high a level of volatile matter in the coal results in inferior coke produced in respect to coke quality properties. It is generally considered that levels of 26-29 % of volatile matter in the coal blend is good for coking purposes. Thus different types of coal are proportionally blended to reach acceptable levels of volatility before the coking process begins.
Uses
Coke is used as a fuel and as a reducing agent in smelting iron ore in a blast furnace.
Since smoke-producing constituents are driven off during the coking of coal, coke forms a desirable fuel for stoves and furnaces in which conditions are not suitable for the complete burning of bituminous coal itself. Coke may be burned with little or no smoke under combustion conditions, while bituminous coal would produce much smoke.
Discovered by accident to have superior heat shielding properties when combined with other materials, coke was one of the materials used in the heat shielding on NASA's Apollo program space vehicles. In its final form, this material was called AVCOAT 5026-39. This material has been used most recently as the heat shielding on the Mars Pathfinder vehicle. Although not used for modern day space shuttles, NASA is utilizing coke and other materials for a new heat shield for its next generation space craft, named Orion, which is due to be completed in 2014.
Gas byproducts
Coke may be used to make synthesis gas, a mixture of carbon monoxide and hydrogen.
- Syngas; Water gas: a mixture of carbon monoxide and hydrogen, made by passing steam over red-hot coke (or any carbon based char)
- Producer gas; wood gas; generator gas; synthetic gas; suction gas: a mixture of carbon monoxide, hydrogen and nitrogen, made by passing air over red-hot coke (or any carbon based char)
History
The Chinese first used coke for heating and cooking no later than the ninth century AD. By the first decades of the eleventh century, Chinese ironworkers in the Yellow River valley began to fuel their furnaces with coke, solving their fuel problem in that tree-sparse region.[1]
In 1603, Sir Henry Platt suggested that coal might be charred in a manner analogous to the way charcoal is produced from wood. This process was not put into practice until 1642, when coke was used for roasting malt in Derbyshire. Coal cannot be used in brewing because its sulfurous fumes would impart a foul taste to the beer. In 1709, Abraham Darby I established a coke-fired blast furnace to produce cast iron. Coke's superior crushing strength allowed blast furnaces to become taller and larger. The ensuing availability of inexpensive iron was one of the factors leading to the Industrial Revolution.
In England in the first years of steam railway locomotives, coke was the normal fuel. This resulted from an early piece of environmental legislation; any proposed locomotive had to "consume its own smoke".[2] This was not technically possible to achieve until the firebox arch came into use, but burning coke, with its low smoke emissions, was considered to meet the requirement. However, this rule was quietly dropped and cheaper coal became the normal fuel, as railways gained acceptance among the general public.
In the late 19th century, the coalfields of western Pennsylvania provided a rich source of raw material for coking. In 1885, the Rochester and Pittsburgh Coal and Iron Company[3] constructed the world's longest string of coke ovens in Walston, Pennsylvania, with 475 ovens over a length of one and a quarter miles. Their output reached 22,000 tons per month.
Properties
The bulk specific gravity of coke is typically around 0.77. It is highly porous.
The most important properties of coke are ash and sulfur content, which are linearly dependent on the coal used for production. Coke with less ash and sulfur content is highly priced on the market. Other important characteristics are the M10, M25, and M40 test crush indexes, which convey the strength of coke during transportation into the blast furnaces; depending on blast furnaces size, finely crushed coke pieces must not be allowed into the blast furnaces because they would impede gas dynamics. A related characteristic is the Coke Strength After Reaction (CSR) index; it represents coke's ability to withstand the violent conditions inside the blast furnace before turning into fine particles.
The water content in coke is practically zero at the end of the coking process, but coke is often water quenched to reduce its temperature so that it can be transported inside the blast furnaces. The porous structure of coke absorbs some water, usually to 3-6 % of its mass. In modern coke plants an advanced method of coke cooling is by air quenching.
Bituminous coal must meet a set of criteria for use as coking coal, determined by particular coal assay techniques. See Section "Production".
The volatility of coke reaches minimum levels at the end of the coking process.
Today coke is produced daily in eastern India in crude ovens without any recovery of the by-products.
Other processes
The solid residue remaining from refinement of petroleum by the "cracking" process is also a form of coke. Petroleum coke has many uses besides being a fuel, such as the manufacture of dry cells and electrodes. Gas works manufacturing syngas also produce coke as an end product, called gas house coke.
Fluid coking is a process which converts heavy residual crude into lighter products such as naphtha, kerosene, heating oil, and hydrocarbon gases. The "fluid" term refers to the fact that coke particles are in a continuous system versus older batch-coking technology.