History of the automobile

Vehicles that can be considered automobiles were demonstrated as early as 1769; although that date is disputed, 1806 marked the introduction of fuel gas powered internal combustion engines and 1885 marked the introduction of gasoline powered internal combustion engines. Automotive history is generally divided into a number of eras based on the major design and technology shifts. Although the exact boundaries of each era can be hazy, scholarship has defined them as follows:

Contents

Eras of invention

Steam era

Cugnot's steam wagon, the second (1771) version
1885-built Benz Patent Motorwagen, the first car to go into production with an internal combustion engine
See also: History of steam road vehicles

Steam-powered self-propelled vehicles are thought to have been devised in the late 18th Century. Nicolas-Joseph Cugnot demonstrated his fardier à vapeur, an experimental steam-driven artillery tractor, in 1770 and 1771. Cugnot's design proved to be impractical and his invention was not developed in his native France, the centre of innovation passing to Great Britain. By 1784, William Murdoch had built a working model of a steam carriage in Redruth, and in 1801 Richard Trevithick was running a full-sized vehicle on the road in Camborne.[1] Such vehicles were in vogue for a time, and over the next decades such innovations as hand brakes, multi-speed transmissions, and better steering developed. Some were commercially successful in providing mass transit, until a backlash against these large speedy vehicles resulted in passing a law, the Locomotive Act, in 1865 requiring self-propelled vehicles on public roads in the United Kingdom be preceded by a man on foot waving a red flag and blowing a horn. This effectively killed road auto development in the UK for most of the rest of the 19th century, as inventors and engineers shifted their efforts to improvements in railway locomotives. The law was not repealed until 1896, although the need for the red flag was removed in 1878.

A replica of Richard Trevithick's 1801 road locomotive 'Puffing Devil'
1870, Vienna, Austria: world's gasoline-run vehicle #1, the First Marcus Car
Second Marcus Car of 1888 (Technical Museum Vienna)

In Russia in the 1780s, Ivan Kulibin started working on a human-pedalled carriage with a steam engine. He finished working on it in 1791. Some of its features included a flywheel, brake, gear box, and bearing, which are also the features of a modern automobile. His design had three wheels. Unfortunately, as with many of his inventions, the government failed to see the potential market and it was not developed further.[2] [3] The first automobile patent in the United States was granted to Oliver Evans in 1789. In 1805, Evans demonstrated his first successful self-propelled vehicle, which not only was the first automobile in the USA but was also the first amphibious vehicle, as his steam-powered vehicle was able to travel on wheels on land and via a paddle wheel in the water.

There were also European efforts. In 1806 Swiss engineer François Isaac de Rivaz built an internal combustion engine powered by a hydrogen and oxygen mixture. In 1815, a professor at Prague Polytechnich, Josef Bozek, built an oil-fired steam car.[4]:p.27 In 1826 Samuel Brown tested his hydrogen-fuelled internal combustion engine by using it to propel a vehicle up Shooter's Hill, Walter Hancock, builder and operator of London steam buses, in 1838 built a four-seat steam phaeton.[4]:p27 Also in 1838, Scotsman Robert Davidson built an electric locomotive that attained a speed of 4 mph (6 km/h). In England, a patent was granted in 1840 for the use of rails as conductors of electric current, and similar American patents were issued to Lilley and Colten in 1847. Between 1832 and 1839 (the exact year is uncertain), Robert Anderson of Scotland invented the first crude electric carriage, powered by non-rechargeable primary cells.

Belgian-born Etienne Lenoir's Hippomobile with a hydrogen gas-fuelled one-cylinder internal combustion engine made a test drive from Paris to Joinville-le-Pont in 1860, covering some nine kilometres in about three hours.[5] A later version was propelled by coal-gas. A Delamare-Deboutteville vehicle patented and trialled in 1884.

About 1870, in Vienna, capital of Austria (then the Austro-Hungarian Empire), inventor Siegfried Marcus put a liquid-fuelled internal combustion engine on a simple handcart which made him the first man to propel a vehicle by means of gasoline. Today, this car is known as "the first Marcus car".

In 1883, Marcus secured a German patent for a low-voltage ignition of the magneto type; this was his only automotive patent. This design was used for all further engines, and the four-seat "second Marcus car" of 1888/89. This ignition, in conjunction with the "rotating-brush carburettor", made the second car's design very innovative.

It is generally acknowledged the first automobiles with gasoline-powered internal combustion engines were completed almost simultaneously by several German inventors working independently: Karl Benz built his first automobile in 1885 in Mannheim. Benz was granted a patent for his automobile on January 29, 1886 and began the first production of automobiles in 1888. Soon after, Gottlieb Daimler and Wilhelm Maybach in Stuttgart in 1889 designed a vehicle from scratch to be an automobile rather than a horse-drawn carriage fitted with an engine. They also are usually credited as inventors of the first motorcycle in 1886. Yet Italy's Enrico Bernardi, of the University of Padua, in 1882 patented a 0.024 hp (18W) 122 cc (7.4 in3) one-cylinder petrol motor, fitting it into his son's tricycle, making it at least a candidate for the first automobile, and first motorcycle;.[4]:p.26 Bernardi enlarged the tricycle in 1892 to carry two adults.[4]:p.26 One of the first four-wheeled petrol-driven automobiles in Britain was built in Birmingham in 1895 by Frederick William Lanchester who also patented the disc brake. And, contrary to popular belief, the first electric starter was installed by Arnold in a copy of the Benz Velo built between 1895 and 1898.[4]:p.25

For all the turmoil, many early pioneers were forgotten. In 1891, John William Lambert built a three-wheeler in Ohio City, Ohio, which was destroyed in a fire the same year, while Henry Nadig constructed a four-wheeler in Allentown, Pennsylvania. It is likely they were not the only ones.[4]:p.25

Veteran era

In My Merry Oldsmobile songbook featuring an Oldsmobile Curved Dash automobile and period driving clothing

The first production of automobiles was by Karl Benz in 1888 in Germany and under licence to Benz, in France by Emile Roger. There were numerous others, including tricycle builders Rudolf Egg, Edward Butler, and Léon Bollée.[4]:p.20-23 Bollée, using a 650-cc (40 in3) engine of his own design, enabled his driver, Jamin, to average 45 km/h (28.2 mph) in the 1897 Paris-Tourville rally.[4]:p.23 By 1900, mass production of automobiles had begun in France and the United States. The first company formed exclusively to build automobiles was Panhard et Levassor in France, which also introduced the first four-cylinder engine.[4]:p.22 Formed in 1889, Panhard was quickly followed by Peugeot two years later. By the start of the twentieth century the automobile industry was beginning to take off in western Europe, especially in France where, in 1903, 30,204 cars were produced, representing 48.8% of world automobile production that year.

In the United States, brothers Charles and Frank Duryea founded the Duryea Motor Wagon Company in 1893, becoming the first American automobile manufacturing company. However, it was Ransom E. Olds, and his Olds Motor Vehicle Company (later known as Oldsmobile). who would dominate this era of automobile production. Its large scale production line was running in 1902. Within a year, Cadillac (formed from the Henry Ford Company), Winton, and Ford were producing cars in the thousands.

Within a few years, a dizzying assortment of technologies were being produced by hundreds of producers all over the western world. Steam, electricity and gasoline-powered autos competed for decades, with gasoline internal combustion engines achieving dominance in the 1910s. Dual- and even quad-engine cars were designed, and engine displacement ranged to more than a dozen liters. Many modern advances, including gas/electric hybrids, multi-valve engines, overhead camshafts, and four-wheel drive, were attempted and discarded at this time.

By 1900, it was possible to talk about a national automotive industry in many countries, including Belgium (home to Vincke, which copied Benz; Germain, a pseudo-Panhard; or Linon and Nagant, both based on the Gobron-Brillié),[4]:p,25 Switzerland (led by Fritz Henriod, Rudolf Egg, Saurer, Johann Weber, and Lorenz Popp),[4]:p.25 Vagnfabrik AB in Sweden, Hammel (by A. F. Hammel and H. U. Johansen at Copenhagen, in Denmark, beginning around 1886),[4]:p.25 Irgens (starting in Bergen, Norway, in 1883, but without success),[4]:p.25-26 Italy (where FIAT started in 1899), and as far afield as Australia (where Pioneer set up shop in 1898 (with an already archaic paraffin-fuelled centre-pivot-steered wagon).[4] Meanwhile, the export trade had begun to be global, with Koch exporting cars and trucks from Paris to Tunisia, Egypt, Iran, and the Dutch East Indies. [4]:p25

Innovation was rapid and rampant, with no clear standards for basic vehicle architectures, body styles, construction materials, or controls. Many veteran cars use a tiller rather than a wheel for steering, for example, and most operated at a single speed. Chain drive was dominant over the modern driveshaft, and closed bodies were extremely rare.

On November 5, 1895, George B. Selden was granted a United States patent for a two-stroke automobile engine (U.S. Patent 549,160 ). This patent did more to hinder than encourage development of autos in the USA. Selden licensed his patent to most major American auto makers, collecting a fee on every car they produced. The Studebaker brothers, having become the world's leading manufacturers of horse-drawn vehicles, made a transition to electric automobiles in 1902 and gasoline engines in 1904, but they continued to build horse-drawn vehicles until 1919.[6]:p.90

Throughout the veteran car era, however, automobiles were seen as more of a novelty than a genuinely useful device. Breakdowns were frequent, fuel was difficult to obtain, roads suitable for travelling were scarce, and rapid innovation meant that a year-old car was nearly worthless. Major breakthroughs in proving the usefulness of the automobile came with the historic long-distance drive of Bertha Benz in 1888 when she traveled more than fifty miles (80 km) from Mannheim to Pforzheim to make people aware of the potential of the vehicles her husband, Karl Benz, manufactured, and after Horatio Nelson Jackson's successful trans-continental drive across the United States in 1903.

Brass or Edwardian era

T-model Ford car parked outside Geelong Library at its launch in Australia in 1915
Main article: Brass Era car

Named for the widespread use of brass in the United States, the Brass or Edwardian era lasted from roughly 1905 through to the beginning of World War I in 1914. 1905 was a signal year in the development of the automobile, marking the point when the majority of sales shifted from the hobbyist and enthusiast to the average user.

Within the 15 years that make up the Brass or Edwardian era, the various experimental designs and alternate power systems would be marginalized. Although the modern touring car had been invented earlier, it was not until Panhard et Levassor's Système Panhard was widely licensed and adopted were recognizable and standardized automobiles created. This system specified front-engined, rear-wheel drive internal combustion cars with a sliding gear transmission. Traditional coach-style vehicles were rapidly abandoned, and buckboard runabouts lost favor with the introduction of tonneaus and other less-expensive touring bodies.

Throughout this era, development of automotive technology was rapid, due in part to a huge number (hundreds) of small manufacturers all competing to gain the world's attention. Key developments included electric ignition (by Robert Bosch, 1903), independent suspension, and four-wheel brakes (by the Arrol-Johnston Company of Scotland in 1909).[4]:p27 Leaf springs were widely used for suspension, though many other systems were still in use, with angle steel taking over from armored wood as the frame material of choice. Transmissions and throttle controls were widely adopted, allowing a variety of cruising speeds, though vehicles generally still had discrete speed settings rather than the infinitely variable system familiar in cars of later eras.

Between 1907 and 1912, the high-wheel motor buggy (resembling the horse buggy of before 1900) was in its heyday, with over seventy-five makers including Holsman (Chicago), IHC (Chicago), and Sears (which sold via catalog); the high-wheeler would be killed by the Model T.[4]:p.65 Some examples of cars of the period included the following:


Vintage era

1926 Austin 7 Box saloon
Lineup of Ford Model As
Main article: Vintage car

The vintage era lasted from the end of World War I (1919) through the stock market crash at the end of 1929. During this period, the front-engined car came to dominate, with closed bodies and standardized controls becoming the norm. In 1919, 90% of cars sold were open; by 1929, 90% were closed.[4]:p.7 Development of the internal combustion engine continued at a rapid pace, with multi-valve and overhead cam engines produced at the high end, and V8, V12, and even V16 engines conceived for the ultra-rich.

Exemplary vintage vehicles:


Pre-WWII era

Citroën Traction Avant
Main article: Classic car

The pre-war part of the classic era began with the Great Depression in 1930 and ended with the recovery after World War II, commonly placed at 1948. It was in this period that integrated fenders and fully-closed bodies began to dominate sales, with the new sedan body style even incorporating a trunk or boot at the rear for storage. The old open-top runabouts, phaetons and touring cars were phased out by the end of the classic era as wings, running boards, and headlights were gradually integrated with the body of the car.

By the 1930s most of the mechanical technology used in today's automobiles had been invented although some things were later "re-invented", and credited to someone else. For example, front-wheel drive was re-introduced by André Citroën with the launch of the Traction Avant in 1934, though it had appeared several years earlier in road cars made by Alvis and Cord, and in racing cars by Miller (and may have appeared as early as 1897). After 1930, the number of auto manufacturers declined sharply as the industry consolidated and matured.

Exemplary pre-war automobiles:


Post-war era

1953 Morris Minor Series II
Jaguar E-type coupe
1985 Mini

see also Antique car

Automobile design finally emerged from the shadow of World War II in 1949, the year that in the United States saw the introduction of high-compression V8 engines and modern bodies from General Motors' Oldsmobile and Cadillac brands. The unibody/strut-suspended 1951 Ford Consul joined the 1948 Morris Minor and 1949 Rover P4 in waking up the automobile market in the United Kingdom. In Italy, Enzo Ferrari was beginning his 250 series just as Lancia introduced their revolutionary V6-powered Aurelia.

Throughout the 1950s, engine power and vehicle speeds rose, designs became more integrated and artful, and cars spread across the world. Alec Issigonis' Mini and Fiat's 500 mini cars swept Europe, while the similar keicar class put Japan on wheels for the first time. The legendary VW Beetle survived Hitler's Germany to shake up the small car market in the Americas. Ultra luxury, exemplified in America by the Cadillac Eldorado Brougham, reappeared after a long absence, and GT cars, like the Ferrari Americas, swept across Europe.

The market changed somewhat in the 1960s, as Detroit began to worry about foreign competition, the European makers adopted ever-higher technology, and Japan appeared as a serious car-producing nation. General Motors, Chrysler, and Ford tried radical small cars, like the GM A-bodies, but had little success. Captive imports and badge engineering swept through the U.S. and UK as conglomerates like the British Motor Corporation consolidated the market. Eventually, this trend reached Italy as niche makers like Maserati, Ferrari, and Lancia were acquired by larger companies. By the end of the decade, the automobile manufacturing world was much smaller.

In America, performance was the hot sell of the 1960s, with pony cars and muscle cars propping up the domestic industry. In 1964 the Ford mustang hit the markets. The Mustang was the hot ticket and was one of the most popular car of the early 1960s. In 1967 Chevrolet released the Camaro to compete with the Ford Mustang. In 1967 Chevy came out with the Camaro Z28, so in 1969 Fords competitiveness went into gear and they came out with the Mustang Boss 302 and the Mustang Boss 429. But everything changed in the 1970s as the 1973 oil crisis, automobile emissions control rules, Japanese and European imports, and stagnant innovation wreaked havoc on the American industry. Throughout the decade, small imported cars outperformed large American ones, and the domestic auto industry began to fail. Small performance cars from BMW, Toyota, and Nissan took the place of big-engined cars from America and Italy.

On the technology front, the biggest developments of the era were the widespread use of independent suspensions, wider application of fuel injection, and an increasing focus on safety in the design of automobiles. The hottest technologies of the 1960s were NSU's Wankel engine, the gas turbine, and the turbocharger. Of these, only the last, pioneered by General Motors but popularized by BMW and Saab, was to see widespread use. Little Mazda had much success with their "Rotary" engines, but was critically affected by its reputation as a polluting gas-guzzler. Other Wankel licensees, including Mercedes-Benz and General Motors, never put their designs into production. Rover and Chrysler both produced experimental turbine cars to no effect.

A so-called yank tank in Havana, Cuba.

Cuba is famous for its pre-1959 cars, known as yank tanks or maquinas, because before the Cuban revolution many rich US citizens lived there, but after the revolution the influx of cars stopped due to the US boycott, so people made sure to keep the cars they had in good condition.

Exemplary post-war cars:


Modern era

The wedge profile of the 1967 NSU Ro 80 was often copied in subsequent decades

The modern era is normally defined as the 25 years preceding the current year. However, there are some technical and design aspects that differentiate modern cars from antiques. Without considering the future of the car, the modern era has been one of increasing standardization, platform sharing, and computer-aided design.

Some particularly notable advances in modern times are the wide spread of front-wheel drive and all-wheel drive, the adoption of the V6 engine configuration, and the ubiquity of fuel injection. While all of these advances were first attempted in earlier eras, they so dominate the market today that it is easy to overlook their significance. Nearly all modern passenger cars are front wheel drive unibody designs with transversely-mounted engines, but this design was considered radical as late as the 1960s.

Body styles have changed as well in the modern era. Three types, the hatchback, minivan, and sport utility vehicle, dominate today's market yet are relatively recent concepts. All originally emphasized practicality but have mutated into today's high-powered luxury crossover SUV and sports wagon. The rise of pickup trucks in the United States and SUVs worldwide has changed the face of motoring, with these "trucks" coming to command more than half of the world automobile market.

The modern era has also seen rapidly rising fuel efficiency and engine output. Once the automobile emissions concerns of 1970s were conquered with computerized engine management systems, power began to rise rapidly. In the 1980s, a powerful sports car might have produced 200 hp (150 kW)—just 20 years later, average passenger cars have engines that powerful, and some performance models offer three times as much power.

Exemplary modern cars:

Future directions

Main article: Future car technologies

References

  1. C.D. Buchanan (1958). "1". Mixed Blessing: The Motor in Britain. Leonard Hill. 
  2. Russian webpage with drawings of Kulibin vehicle designs
  3. Second Russian webpage with drawing
  4. 4.00 4.01 4.02 4.03 4.04 4.05 4.06 4.07 4.08 4.09 4.10 4.11 4.12 4.13 4.14 4.15 4.16 4.17 Georgano, G.N. (1985). Cars: Early and Vintage, 1886-1930. London: Grange-Universal. 
  5. Data on the Hippomobile and hydrogen/fuel cells from TÜV SÜD Industrie Service GmbH
  6. Longstreet, Stephen. A Century on Wheels: The Story of Studebaker. New York: Henry Holt and Company. pp. 121. 1st edn., 1952. 
  7. NY Times Advertisement
  8. Buckley M Used Car Buying Guide: Range Rover Channel 4 (UK) 24 Jan 2005

See also

Further reading

External links