Glycerol | |
---|---|
|
|
IUPAC name | Propane-1,2,3-triol |
Other names | glycerin glycerine propane-1,2,3-triol 1,2,3-propanetriol 1,2,3-trihydroxypropane glyceritol glycyl alcohol |
Identifiers | |
CAS number | 56-81-5 |
SMILES |
|
ChemSpider ID | |
Properties | |
Molecular formula | C3H5(OH)3 |
Molar mass | 92.09382 g/mol |
Density | 1.261 g/cm³ |
Melting point |
18 °C (64.4°F) |
Boiling point |
290 °C (554°F) |
Viscosity | 1.5 Pa·s |
Hazards | |
NFPA 704 |
1
1
0
|
Flash point | 160 °C (closed cup) |
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa) Infobox references |
Glycerol is a chemical compound also commonly called glycerin or glycerine. It is a colorless, odorless, viscous liquid that is widely used in pharmaceutical formulations. Glycerol is a sugar alcohol, and is sweet-tasting and of low toxicity. Glycerol has three hydrophilic hydroxyl groups that are responsible for its solubility in water and its hygroscopic nature. Its surface tension is 64.00 mN/m at 20 °C , and it has a temperature coefficient of -0.0598 mN/(m K). The glycerol substructure is a central component of many lipids.
Contents |
Until recently, synthetic glycerol was mainly manufactured at an industrial scale from epichlorohydrin. Since glycerol forms the backbone of triglycerides, it is produced on saponification or transesterification. Soap-making and biodiesel production are respective examples.
Glycerol is a 10% by-product of biodiesel production (via the transesterification of vegetable oils). This has led to an excess of crude glycerol in the market, making the epichlorohydrin process no longer economical. Current levels of glycerol production are running at about 350,000 tons per annum in the USA, and 600,000 tpa in Europe. This will increase as it implements EU directive 2003/30/EC which requires replacement of 5.75% of petroleum fuels with biofuel across all Member States by 2010[1].
In foods and beverages, glycerol serves as a humectant, solvent and sweetener, and may help preserve foods. It is also used as filler in commercially prepared low-fat foods (e.g., cookies), and as a thickening agent in liqueurs. Glycerol also serves as a way, along with water, to preserve certain types of leaves. Glycerol is also used as a sugar substitute. In this regard, it has approximately 27 calories per teaspoon and is 60% as sweet as sucrose. Although it has about the same food energy as table sugar, it does not raise blood sugar levels, nor does it feed the bacteria that form plaques and cause dental cavities. As a food additive, glycerol is also known as E number E422.
In organic synthesis, glycerol is used as a readily available prochiral building block.
It is one of the major raw materials for the manufacture of polyols for flexible foams, and to a lesser extent rigid polyurethane foams.
Glycerol is used to produce nitroglycerin, which is an essential ingredient of smokeless gunpowder and various munitions. Reliance on soap-making to supply co-product glycerine made it difficult to increase production to meet wartime demand. Hence, synthetic glycerin processes were national defence priorities in the days leading up to World War II.
Glycerol is also used to manufacture mono- and di-glycerides for use as emulsifiers, as well as polyglycerol esters going into shortenings and margarine.
Glycerol is a common component of solvents for enzymatic reagents stored at temperatures below zero degrees Celsius due to the depression of the freezing temperature of solutions with high concentrations of glycerol. It is also dissolved in water to reduce damage by ice crystals to laboratory organisms that are stored in frozen solutions, such as bacteria, nematodes, and fruit flies. Samples are loaded into agarose gel electrophoresis mixed in loading buffers that mainly consist of glycerol; when the sample is injected into wells, the glycerol causes the solution to sink through the running buffer to the bottom of the well.
Glycerol is used in medical and pharmaceutical and personal care preparations, mainly as a means of improving smoothness, providing lubrication and as a humectant. It is found in cough syrups, elixirs and expectorants, toothpaste, mouthwashes, skin care products, shaving cream, hair care products, and soaps.
As a 10% solution, glycerol prevents tannins from precipitating in ethanol extracts of plants (tinctures). It is also used as a substitute for ethanol as a solvent in preparing herbal extractions. It is less extractive and is approximately 30% less able to be absorbed by the body. Fluid extract manufacturers often extract herbs in hot water before adding glycerin to make glycerites.[2][3][4]
Used as a laxative when introduced into the rectum in suppository or liquid (enema) form; irritates the bowel and induces a hyperosmotic effect.
Glycerol is a component of glycerol soap, which is made from denatured alcohol, glycerol, sodium castorate (from castor), sodium cocoate, sodium tallowate, sucrose, water, and parfum (fragrance). Sometimes one adds sodium laureth sulfate. This kind of soap is used by people with sensitive, easily-irritated skin because it prevents skin dryness with its moisturizing properties. It is possible to make glycerol soap at home.
It is also used in de-/anti-icing fluids, as in vitrification of blood cells for storage in liquid nitrogen
In motion-picture production, glycerol is used as a non-evaporating substitute for perspiration on actors. It is also used in the formulation of some types of stage blood.
A great deal of research is being conducted to try to make value-added molecules from crude glycerol (typically containing 20 % water and residual esterification catalyst) obtained from biodiesel production, as an alternative to disposal by incineration. One such program to add value to this glut of glycerol is the UK-based initiative The Glycerol Challenge. Some potential uses for glycerol include the following:
Glycerol is a precursor for synthesis of triacylglycerols and of phospholipids in the liver and adipose tissue. When the body uses stored fat as a source of energy, glycerol and fatty acids are released into the bloodstream. The glycerol component can be converted to glucose by the liver and provides energy for cellular metabolism.
Before glycerol can enter the pathway of glycolysis or gluconeogenesis (depending on physiological conditions), it must be converted to their intermediate glyceraldehyde 3-phosphate in the following steps:
Glycerol | Glycerol kinase | Glycerol-3-phosphate | Glycerol-3-phosphate dehydrogenase | Dihydroxyacetone phosphate | Triosephosphate isomerase | Glyceraldehyde 3-phosphate | |||
ATP | ADP | NAD+ | NADH |
||||||
NAD+ | NADH |
The enzyme glycerol kinase is present only in the liver. In adipose tissue, glycerol 3-phosphate is obtained from dihydroxyacetone phosphate (DHAP) with the enzyme glycerol-3-phosphate dehydrogenase.
On May 4, 2007, the US Food and Drug Administration advised all US makers of medicines to test all batches of glycerine for the toxic diethylene glycol.[12] This follows an occurrence of 100 fatal poisonings in Panama resulting from a Chinese factory deliberately falsifying records in order to export the cheaper diethylene glycol as the more expensive glycerol.[13] Glycerine and diethylene glycol are similar in appearance, smell, and taste. The US Federal Food, Drug, and Cosmetic Act was passed following the 1937 "Elixir Sulfanilamide" incident of poisoning caused by diethylene glycol contamination of medicine.