Electronic keyboard

An electronic keyboard.

An electronic keyboard or digital keyboard is a type of keyboard instrument. Its sound is generated or amplified by one or more electronic devices.

Electronic keyboards perhaps were most popular in the 1980s, and are closely related to 1980s pop and New Wave music, but they have remained popular since.

Modern usage of the term "electronic keyboard" typically describes a type of inexpensive sampler marketed to amateurs and children. The term is occasionally used as an umbrella descriptor for any electronic musical instruments with a musical keyboard (including but not limited to electric pianos, digital pianos, synthesizers, mellotrons, samplers, electronic organs, and arranger keyboards) but professional musicians generally refer to these instruments by name or simply as "keyboards", reserving the term "electronic keyboard" for the inexpensive type noted above.

Such electronic keyboard instruments are typically inexpensive, smaller, with mediocre sound quality, and lack many features offered by professional instruments. They can generally be located in electronics stores side-by-side with stereos, video games and the like, or even in toy stores.

However, the line between "professional" and "amateur" instruments can often be blurred: professional musicians may use inexpensive keyboards for novelty or out of necessity (for example, reggae music in the '80s made frequent use of pre-programmed rhythm patterns on inexpensive digital keyboards), and due to advances in computer and electronics technology, many relatively inexpensive keyboards (under US$1000) have an array of features that would have been unavailable on even the most expensive synthesizers of past decades.

Contents

Internal architecture

To facilitate the engineering processes of design and development of electronic keyboards, keyboards divided into major components:

Pre-programmed features

Concepts and definitions

an electronic keyboard.

MIDI controls

Electronic keyboards typically use MIDI signals to send and receive data, a standard format now universally used across most digital electronic musical instruments. On the simplest example of an electronic keyboard, MIDI signals would be sent when a note is pressed on the keyboard, and would determine which note is pressed and for how long. Additionally, most electronic keyboards now have a "touch sensitivity", or "touch response" function which operates by an extra sensor in each key, which estimates the pressure of each note being pressed by the difference in time between when the key begins to be pressed and when it is pressed completely. The values calculated by these sensors are then converted into MIDI data which gives a velocity value for each note, which is usually directly proportional to amplitude of the note when played.

MIDI data can also be used to add digital effects to the sounds played, such as reverb, chorus, delay and tremolo. These effects are usually mapped to three of the 127 MIDI controls within the keyboard's infrastructure — one for reverb, one for chorus and one for other effects — and are generally configurable through the keyboard's graphical interface. Additionally, many keyboards have "auto-harmony" effects which will complement each note played with one or more notes of higher or lower pitch, to create an interval or chord.

DSP effects can also be controlled on the fly by physical controllers. Electronic keyboards often have two wheels on the left hand side, generally known as a pitch bend and a modulation wheel. The difference between these is that the pitch bend wheel always flicks back to its default position — the centre — while the modulation wheel can be placed freely. By default, the pitch bend wheel controls the pitch of the note in small values, allowing the simulation of slides and other techniques which control the pitch more subtlely. The modulation wheel is usually set to control a tremolo effect by default. However, on most electronic keyboards, the user will be able to map any MIDI control to these wheels. Professional MIDI controller keyboards often also have an array of knobs and sliders to modulate various MIDI controls, which are often used to control DSP effects.

Most electronic keyboards also have a socket at the back, into which a foot switch can be plugged. These are often called "sustain pedals" by keyboardists, as their most common function is to simulate the sustain pedal on a piano by turning on and off the MIDI control which adds sustain to a note. However, since they are also simple MIDI devices, foot switches can usually be configured to turn on and off any MIDI control, such as turning of one of the DSP effects, or the auto-harmony.

A partial list of manufacturers

See also

External links