Dolomite | |
---|---|
![]() |
|
General | |
Category | Carbonate mineral |
Chemical formula | CaMg(CO3)2 |
Identification | |
Color | white, gray to pink |
Crystal habit | tabular crystals, often with curved faces, also columnar, stalactitic, granular, massive. |
Crystal system | trigonal - rhombohedral, bar3 |
Twinning | common as simple contact twins |
Cleavage | rhombohedral cleavage (3 planes) |
Fracture | brittle - conchoidal |
Mohs Scale hardness | 3.5 to 4 |
Luster | vitreous to pearly |
Refractive index | nω = 1.679–1.681 nε = 1.500 |
Optical Properties | Uniaxial (-) |
Birefringence | δ = 0.179–0.181 |
Streak | white |
Specific gravity | 2.84–2.86 |
Solubility | Poorly soluble in dilute HCl unless powdered. |
Other Characteristics | May fluoresce white to pink under UV; triboluminescent. |
References | [1][2][3][4] |
Dolomite (pronounced /ˈdɒləmaɪt/) is the name of a sedimentary carbonate rock and a mineral, both composed of calcium magnesium carbonate CaMg(CO3)2 found in crystals.
Dolomite rock (also dolostone) is composed predominantly of the mineral dolomite. Limestone that is partially replaced by dolomite is referred to as dolomitic limestone, or in old U.S. geologic literature as magnesian limestone. Dolomite was first described in 1791 as the rock by the French naturalist and geologist, Déodat Gratet de Dolomieu (1750–1801) for exposures in the Dolomite Alps of northern Italy.
Contents |
The mineral dolomite crystallizes in the trigonal-rhombohedral system. It forms white, gray to pink, commonly curved crystals, although it is usually massive. It has physical properties similar to those of the mineral calcite, but does not rapidly dissolve or effervesce (fizz) in dilute hydrochloric acid unless it is scratched or in powdered form. The Mohs hardness is 3.5 to 4 and the specific gravity is 2.85. Refractive index values are nω = 1.679 - 1.681 and nε = 1.500. Crystal twinning is common. A solid solution series exists between dolomite and iron rich ankerite. Small amounts of iron in the structure give the crystals a yellow to brown tint. Manganese substitutes in the structure also up to about three percent MnO. A high manganese content gives the crystals a rosy pink color noted in the image above. A series with the manganese rich kutnohorite may exist. Lead and zinc also substitute in the structure for magnesium.
Vast deposits are present in the geological record, but the mineral is relatively rare in modern environments. However, laboratory synthesis of stoichiometric dolomite has been carried out only at temperatures of greater than 100 degrees Celsius, conditions typical of burial in sedimentary basins—even though much dolomite in the rock record appears to have formed in low-temperature conditions. The high temperature is likely to speed up the movement of calcium and magnesium ions so that they can find their places in the ordered structure within a reasonable amount of time. This suggests that the lack of dolomite that is being formed today is likely due to kinematic factors.
Modern dolomite does occur as a precipitating mineral in specialized environments on the surface of the earth today. In the 1950s and 60s, dolomite was found to be forming in highly saline lakes in the Coorong region of South Australia. Dolomite crystals also occur in deep-sea sediments, where organic matter content is high. This dolomite is termed "organogenic" dolomite.
Recent research has found modern dolomite formation under anaerobic conditions in supersaturated saline lagoons along the Rio de Janeiro coast of Brazil, namely, Lagoa Vermelha and Brejo do Espinho. One interesting reported case was the formation of dolomite in the kidneys of a Dalmatian dog. This was believed to be due to chemical processes triggered by bacteria. Dolomite has been speculated to develop under these conditions with the help of sulfate-reducing bacteria. This joins other research in pointing out many new interesting links between large-scale geology and small-scale microbiology (see geomicrobiology).
The actual role of bacteria in the low-temperature formation of dolomite remains to be demonstrated. The specific mechanism of dolomitization, involving sulfate-reducing bacteria, has not yet been demonstrated.[5]
Dolomite appears to form in many different types of environment and can have varying structural, textural and chemical characteristics. Some researchers have stated "there are dolomites and dolomites", meaning that there may not be one single mechanism by which dolomite can form. Much modern dolomite differs significantly from the bulk of the dolomite found in the rock record, leading researchers to speculate that environments where dolomite formed in the geologic past differ significantly from those where it forms today.
Reproducible laboratory syntheses of dolomite (and magnesite) leads first to the initial precipitation of a metastable "precursor" (such as magnesium calcite), to be changed gradually into more and more of the stable phase (such as dolomite or magnesite) during periodical intervals of dissolution and reprecipitation. The general principle governing the course of this irreversible geochemical reaction has been coined Ostwald's step rule.
For a very long time scientists had difficulties synthesizing dolomite. However, in a 1999 study, through a processes of dissolution alternating with the intervals of precipitation measurable levels of dolomite were synthesized at low temperatures and pressures.[6]
Dolimitization of calcite also occurs at certain depts of coral atolls where water is undersaturated in calcium carbonate but saturated in dolomite. Convection created by tides and sea currents enchance this change. Hydrothermal currents created by volcanoes under the atoll may also play an important role.
Dolomite is used as an ornamental stone, a concrete aggregate and as a source of magnesium oxide. It is an important petroleum reservoir rock, and serves as the host rock for large strata-bound Mississippi Valley-Type (MVT) ore deposits of base metals (that is, readily oxidized metals) such as lead, zinc, and copper. Where calcite limestone is uncommon or too costly, dolomite is sometime used in its place as a flux (impurity remover) for the smelting of iron and steel. Large quantities of processed dolomite are used in the production of float glass (flat glass)
In horticulture, dolomite and dolomitic limestone are added to soils and soilless potting mixes to lower their acidity ("sweeten" them). Home and container gardening are common examples of this use.
In nutrition, dolomite is sold sometimes as a dietary supplement on the assumption that it should make a good simultaneous source of the two important elemental nutrients calcium and magnesium. However, laboratory experiments conducted at the University of Alberta demonstrate that dolomite is practically insoluble in stomach acid and is eliminated from the body before significant magnesium or calcium can be absorbed.. Dolomites from Mississippi Valley-Type ore regions such as the Old Lead Belt and New Lead Belt in southeastern Missouri United States often include significant levels of lead and other toxic elements.