Chlorine

This article is about the chemical element. For chlorine, the whitening agent, see Bleach.

17 sulfur ← chlorine → argon F ↑ Cl ↓ Br Periodic table - Extended periodic table
General
Name, symbol, number	chlorine, Cl, 17
Element category	Halogen
Group, period, block	17, 3, p
Appearance	yellowish green
Standard atomic weight	35.453(2) g·mol−1
Electron configuration	[Ne] 3s2 3p5
Electrons per shell	2, 8, 7
Physical properties
Phase	gas
Density	(0 °C, 101.325 kPa) 3.2 g/L
Melting point	171.6 K (-101.5 °C, -150.7 °F)
Boiling point	239.11 K (-34.4 °C, -29.27 °F)
Critical point	416.9 K, 7.991 MPa
Heat of fusion	(Cl2) 6.406 kJ·mol−1
Heat of vaporization	(Cl2) 20.41 kJ·mol−1
Specific heat capacity	(25 °C) (Cl2) 33.949 J·mol−1·K−1
Vapor pressure P/Pa 1 10 100 1 k 10 k 100 k at T/K 128 139 153 170 197 239
Atomic properties
Crystal structure	orthorhombic
Oxidation states	±1, 3, 5, 7 (strongly acidic oxide)
Electronegativity	3.16 (Pauling scale)
Ionization energies (more)	1st: 1251.2 kJ·mol−1
	2nd: 2298 kJ·mol−1
	3rd: 3822 kJ·mol−1
Atomic radius	100 pm
Atomic radius (calc.)	79 pm
Covalent radius	99 pm
Van der Waals radius	175 pm
Miscellaneous
Magnetic ordering	nonmagnetic
Electrical resistivity	(20 °C) > 10 Ω·m
Thermal conductivity	(300 K) 8.9x10-3  W·m−1·K−1
Speed of sound	(gas, 0 °C) 206 m/s
CAS registry number	7782-50-5
Selected isotopes
Main article: Isotopes of chlorine iso NA half-life DM DE (MeV) DP 35Cl 75.77% 35Cl is stable with 18 neutrons 36Cl syn 3.01×105 y β- 0.709 36Ar ε - 36S 37Cl 24.23% 37Cl is stable with 20 neutrons
References

Chlorine (IPA: /ˈklɔriːn/, from the Greek word 'χλωρóς' (khlôros, meaning 'pale green'), is the chemical element with atomic number 17 and symbol Cl. It is a halogen, found in the periodic table in group 17 (formerly VII, VIIa, or VIIb). As the chloride ion, which is part of common salt and other compounds, it is abundant in nature and necessary to most forms of life, including humans. In its common elemental form (Cl₂ or "dichlorine") under standard conditions, it is a pale green gas about 2.5 times as dense as air. It has a disagreeable, suffocating odor that is detectable in concentrations as low as 1 ppm,^[1] and is choking and poisonous. Chlorine is a powerful oxidant and is used in bleaching and disinfectants. As a common disinfectant, chlorine compounds are used in swimming pools to keep them clean and sanitary. In the upper atmosphere, chlorine-containing molecules have been implicated in the destruction of the ozone layer.

Contents 1 Characteristics 1.1 Isotopes 1.2 Occurrence 2 History 3 Production 3.1 Gas extraction 3.2 Other methods 3.3 Industrial production 4 Compounds 4.1 Oxidation states 5 Applications and uses 5.1 Production of industrial and consumer products 5.2 Purification and disinfection 5.3 Chemistry 5.4 Use as a weapon 5.5 Chlorine cracking 5.6 Other uses 6 Health Effects 7 See also 8 References 9 External links

Characteristics

At standard temperature and pressure, two chlorine atoms form the diatomic molecule Cl₂. This is a pale yellow-green gas that has its specific strong smell. The bonding between the two atoms is relatively weak (only of 242.580 ±0.004 kJ/mol) which makes the Cl₂ molecule highly reactive.

Along with fluorine, bromine, iodine and astatine, chlorine is a member of the halogen series that forms the group 17 of the periodic table - most reactive group of elements. It combines readily with nearly all elements.

Compounds with oxygen, nitrogen, xenon, and krypton are known, but do not form by direct reaction of the elements.^[2] Chlorine, though very reactive, is not as extremely reactive as fluorine. Pure chlorine gas does, however, support combustion of organic compounds such as hydrocarbons, although the carbon component tends to burn incompletely, with much of it remaining as soot.^[3] At 10 °C and atmospheric pressure, one liter of water dissolves 3.10 L of gaseous chlorine, and at 30°C, 1 L of water dissolves only 1.77 liters of chlorine.^[4]

Chlorine is a member of the salt-forming halogen series and is extracted from chlorides through oxidation often by electrolysis. With metals, it forms salts called chlorides. As the chloride ion, Cl⁻, it is also the most abundant dissolved ion in ocean water.

Isotopes

Main article: Isotopes of chlorine

Chlorine has isotopes with mass numbers ranging from 32 to 40. There are two principal stable isotopes, ³⁵Cl (75.77%) and ³⁷Cl (24.23%), giving chlorine atoms in bulk an apparent atomic weight of 35.4527 g/mol.

Trace amounts of radioactive ³⁶Cl exist in the environment, in a ratio of about 7x10⁻¹³ to 1 with stable isotopes. ³⁶Cl is produced in the atmosphere by spallation of ³⁶Ar by interactions with cosmic ray protons. In the subsurface environment, ³⁶Cl is generated primarily as a result of neutron capture by ³⁵Cl or muon capture by ⁴⁰Ca. ³⁶Cl decays to ³⁶S and to ³⁶Ar, with a combined half-life of 308,000 years. The half-life of this hydrophilic nonreactive isotope makes it suitable for geologic dating in the range of 60,000 to 1 million years. Additionally, large amounts of ³⁶Cl were produced by irradiation of seawater during atmospheric detonations of nuclear weapons between 1952 and 1958. The residence time of ³⁶Cl in the atmosphere is about 1 week. Thus, as an event marker of 1950s water in soil and ground water, ³⁶Cl is also useful for dating waters less than 50 years before the present. ³⁶Cl has seen use in other areas of the geological sciences, including dating ice and sediments.

Occurrence

See also Halide minerals.

In nature, chlorine is found primarily as the chloride ion, a component of the salt that is deposited in the earth or dissolved in the oceans — about 1.9% of the mass of seawater is chloride ions. Even higher concentrations of chloride are found in the Dead Sea and in underground brine deposits. Most chloride salts are soluble in water, thus, chloride-containing minerals are usually only found in abundance in dry climates or deep underground. Common chloride minerals include halite (sodium chloride), sylvite (potassium chloride), and carnallite (potassium magnesium chloride hexahydrate). Over 2000 naturally-occurring organic chlorine compounds are known.^[5]

Industrially, elemental chlorine is usually produced by the electrolysis of sodium chloride dissolved in water. Along with chlorine, this chloralkali process yields hydrogen gas and sodium hydroxide, according to the following chemical equation:

2 NaCl + 2 H₂O → Cl₂ + H₂ + 2 NaOH

History

The most common compound of chlorine, sodium chloride, has been known since ancient times; archaeologists have found evidence that rock salt was used as early as 3000 B.C. and brine as early as 6000 B.C..^[6] The first compound of chlorine synthesized was probably hydrochloric acid (as a solution), which was prepared by the Persian alchemist Rhazes around A.D.900. Around A.D.1200, aqua regia (a mixture of nitric acid and hydrochloric acid) began to be used to dissolve gold, and today this is still one of the few reagents that will dissolve gold. Upon dissolving gold in aqua regia, chlorine gas is released along with other nauseating and irritating gases, but this wasn't known until much more recently.

Chlorine was first prepared and studied in 1774 by Swedish chemist Carl Wilhelm Scheele, and therefore he is credited for its discovery.^[7] He called it "dephlogisticated muriatic acid air" since it was a gas (then called "airs") and it came from hydrochloric acid (then known as "muriatic acid").^[7] However, he failed to establish chlorine as an element, mistakenly thinking that it was the oxide obtained from the hydrochloric acid (see phlogiston theory).^[7] He named the new element within this oxide as muriaticum.^[7] Regardless of what he thought, Scheele did isolate chlorine by reacting MnO₂ with HCl:

4 HCl + MnO₂ → MnCl₂ + 2 H₂O + Cl₂

Scheele observed several of the properties of chlorine: the bleaching effect on litmus, the deadly effect on insects, the yellow green colour, and the smell similar to aqua regia.

Claude Berthollet suggested that Scheele's dephlogisticated muratic acid air must be a combination of oxygen and an undiscovered element, muriaticum.

In 1809 Joseph Louis Gay-Lussac and Louis-Jacques Thénard tried to decompose dephlogisticated muratic acid air by reacting it with charcoal to release the free element muriaticum (and carbon dioxide).^[7] They did not succeed and published a report in which they considered the possibility that dephlogisticated muratic acid air is an element, but were not convinced.^[8]

In 1810, Sir Humphrey Davy tried the same experiment again, and concluded that it was an element, and not a compound.^[7] He named this new element as chlorine, from the Greek word χλωρος (chlōros), meaning green-yellow.^[9] The name halogen, meaning salt producer, was originally defined for chlorine (in 1811 by Johann Salomo Christoph Schweigger), and it was later applied to the rest of the elements in this family. In 1822, Michael Faraday liquefied chlorine for the first time.^[10]

Chlorine was first used to bleach textiles in 1785.^[11] In 1826, silver chloride was used to produce photographic images for the first time.^[12] Chloroform was first used as an anesthetic in 1847.^[12] Chlorine was first used as a germicide to prevent the spread of puerperal fever in the maternity wards of Vienna General Hospital in Austria in 1847,^[13] and in 1850 by John Snow to disinfect the water supply in London after an outbreak of cholera. The US Department of Treasury called for all water to be disinfected with chlorine by 1918.^[12] Polyvinylchloride (PVC) was invented in 1912, initially without a purpose.^[12] Chlorine gas was first introduced as a weapon on April 22, 1915 at Ypres by the German Army.^[14][15] and the results of this weapon were disastrous because gas masks had not yet been invented.

Production

Main article: Chlorine production

Gas extraction

Chlorine can be manufactured by electrolysis of a sodium chloride solution (brine). The production of chlorine results in the co-products caustic soda (sodium hydroxide, NaOH) and hydrogen gas (H₂). These two products, as well as chlorine itself, are highly reactive. Chlorine can also be produced by the electrolysis of a solution of potassium chloride, in which case the co-products are hydrogen and caustic potash (potassium hydroxide). There are three industrial methods for the extraction of chlorine by electrolysis of chloride solutions, all proceeding according to the following equations:

Cathode: 2 H⁺ (aq) + 2 e⁻ → H₂ (g)

Anode: 2 Cl⁻ (aq) → Cl₂ (g) + 2 e⁻

Overall process: 2 NaCl (or KCl) + 2 H₂O → Cl₂ + H₂ + 2 NaOH (or KOH)

Mercury cell electrolysis

Mercury cell electrolysis, also known as the Castner-Kellner process, was the first method used at the end of the nineteenth century to produce chlorine on an industrial scale.^[16][17] The "rocking" cells used have been improved over the years.^[18] Today, in the "primary cell", titanium anodes (formerly graphite ones) are placed in a sodium (or potassium) chloride solution flowing over a liquid mercury cathode. When a potential difference is applied and current flows, chlorine is released at the titanium anode and sodium (or potassium) dissolves in the mercury cathode forming an amalgam. This flows continuously into a separate reactor ("denuder" or "secondary cell"), where it is usually converted back to mercury by reaction with water, producing hydrogen and sodium (or potassium) hydroxide at a commercially useful concentration (50% by weight). The mercury is then recycled to the primary cell.

The mercury process is the least energy-efficient of the three main technologies (mercury, diaphragm and membrane) and there are also concerns about mercury emissions.

It is estimated that there are still around 100 mercury-cell plants operating worldwide. In Japan, mercury-based chloralkali production was virtually phased out by 1987 (except for the last two potassium chloride units shut down in 2003). In the United States, there will be only five mercury plants remaining in operation by the end of 2008. In Europe, mercury cells accounted for 43% of capacity in 2006 and Western European producers have committed to closing or converting all remaining chloralkali mercury plants by 2020.^[19]

Diaphragm cell electrolysis

In diaphragm cell electrolysis, an asbestos (or polymer-fiber) diaphragm separates a cathode and an anode, preventing the chlorine forming at the anode from re-mixing with the sodium hydroxide and the hydrogen formed at the cathode.^[20] This technology was also developed at the end of the nineteenth century. There are several variants of this process: the Le Sueur cell (1893), the Hargreaves-Bird cell (1901), the Gibbs cell (1908), and the Townsend cell (1904).^[21][22] The cells vary in construction and placement of the diaphragm, with some having the diaphragm in direct contact with the cathode.

The salt solution (brine) is continuously fed to the anode compartment and flows through the diaphragm to the cathode compartment, where the caustic alkali is produced and the brine is partially depleted.

As a result, diaphragm methods produce alkali that is quite dilute (about 12%) and of lower purity than do mercury cell methods. But diaphragm cells are not burdened with the problem of preventing mercury discharge into the environment. They also operate at a lower voltage, resulting in an energy savings over the mercury cell method,^[22] but large amounts of steam are required if the caustic has to be evaporated to the commercial concentration of 50%.

Membrane cell electrolysis

Development of this technology began in the 1970s. The electrolysis cell is divided into two "rooms" by a cation permeable membrane acting as an ion exchanger. Saturated sodium (or potassium) chloride solution is passed through the anode compartment, leaving at a lower concentration.^[23] Sodium (or potassium) hydroxide solution is circulated through the cathode compartment, exiting at a higher concentration. A portion of the concentrated sodium hydroxide solution leaving the cell is diverted as product, while the remainder is diluted with deionized water and passed through the electrolysis apparatus again.

This method is more efficient than the diaphragm cell and produces very pure sodium (or potassium) hydroxide at about 32% concentration, but requires very pure brine.

Other electrolytic processes

Although a much lower production scale is involved, electrolytic diaphragm and membrane technologies are also used industrially to recover chlorine from hydrochloric acid solutions, producing hydrogen (but no caustic alkali) as a co-product.

Furthermore, electrolysis of fused chloride salts (Downs process) also enables chlorine to be produced, in this case as a by-product of the manufacture of metallic sodium or magnesium.

Other methods

Before electrolytic methods were used for chlorine production, the direct oxidation of hydrogen chloride with oxygen or air was exercised in the Deacon process:

4 HCl + O₂ → 2 Cl₂ + 2 H₂O

This reaction is accomplished with the use of copper(II) chloride (CuCl₂) as a catalyst and is performed at high temperature (about 400 °C). The amount of extracted chlorine is approximately 80%. Due to the extremely corrosive reaction mixture, industrial use of this method is difficult and several pilot trials failed in the past. Nevertheless, recent developments are promising. Recently Sumitomo patented a catalyst for the Deacon process using ruthenium(IV) oxide (RuO₂).^[24]

Another earlier process to produce chlorine was to heat brine with acid and manganese dioxide.

2 NaCl + 2H₂SO₄ + MnO₂ → Na₂SO₄ + MnSO₄ + 2 H₂O + Cl₂

Using this process, chemist Carl Wilhelm Scheele was the first to isolate chlorine in a laboratory. The manganese can be recovered by the Weldon process.^[25]

In the latter half of the 19th century, prior to the adoption of electrolytic methods of chlorine production, there was substantial production of chlorine by these reactions to meet demand for bleach and bleaching powder for use by textile industries; by the 1880s the UK, as well as supporting its own (then not inconsiderable) domestic textile production was exporting 70,000 tons per year of bleaching powder.^[26] This demand was met by capturing hydrochloric acid driven off as a gas during the production of alkali by the Leblanc process, oxidising this to chlorine (originally by reaction with manganese dioxide), later by direct oxidation by air using the Deacon process (in which case impurities capable of poisoning the catalyst had first to be removed), and subsequently absorbing the chlorine onto lime.

Small amounts of chlorine gas can be made in the laboratory by putting concentrated hydrochloric acid in a flask with a side arm and rubber tubing attached. Manganese dioxide is then added and the flask stoppered. The reaction is not greatly exothermic. As chlorine is denser than air, it can be collected by placing the tube inside a flask where it will displace the air. Once full, the collecting flask can be stoppered.

Another method for producing small amounts of chlorine gas in a lab is by adding concentrated hydrochloric acid (typically about 5M) to sodium hypochlorite or sodium chlorate solution.

Industrial production

Large-scale production of chlorine involves several steps and many pieces of equipment. The description below is typical of a membrane plant. The plant also simultaneously produces sodium hydroxide (caustic soda) and hydrogen gas. A typical plant consists of brine production/treatment, cell operations, chlorine cooling & drying, chlorine compression & liquefaction, liquid chlorine storage & loading, caustic handling, evaporation, storage & loading and hydrogen handling.

Brine

Key to the production of chlorine is the operation of the brine saturation/treatment system. Maintaining a properly saturated solution with the correct purity is vital, especially for membrane cells. Many plants have a salt pile which is sprayed with recycled brine. Others have slurry tanks that are fed raw salt.

The raw brine is partially or totally treated with sodium hydroxide, sodium carbonate and a flocculant to reduce calcium, magnesium and other impurities. The brine proceeds to a large clarifier or a filter where the impurities are removed. The total brine is additionally filtered before entering ion exchangers to further remove impurities. At several points in this process, the brine is tested for hardness and strength.

After the ion exchangers, the brine is considered pure, and is transferred to storage tanks to be pumped into the cell room. Brine, fed to the cell line, is heated to the correct temperature to control exit brine temperatures according to the electrical load. Brine exiting the cell room must be treated to remove residual chlorine and control pH levels before being returned to the saturation stage. This can be accomplished via dechlorination towers with acid and sodium bisulfite addition. Failure to remove chlorine can result in damage to the cells. Brine should be monitored for accumulation of bothchlorate anions and sulfate anions, and either have a treatment system in place, or purging of the brine loop to maintain safe levels, since chlorate anions can diffuse through the membranes and contaminate the caustic, while sulfate anions can damage the anode surface coating.

Cell room

The building that houses the many electrolytic cells is usually called a cell room or cell house, although some plants are built outdoors. This building contains support structures for the cells, connections for supplying electrical power to the cells and piping for the fluids. Monitoring and control of the temperatures of the feed caustic and brine is done to control exit temperatures. Also monitored are the voltages of each cell which vary with the electrical load on the cell room that is used to control the rate of production. Monitoring and control of the pressures in the chlorine and hydrogen headers is also done via pressure control valves.

Direct current is supplied via a rectified power source. Plant load is controlled by varying the current to the cells. As the current is increased, flow rates for brine and caustic and deionized water are increased, while lowering the feed temperatures.

Cooling and drying

Chlorine gas exiting the cell line must be cooled and dried since the exit gas can be over 80°C and contains moisture that allows chlorine gas to be corrosive to iron piping. Cooling the gas allows for a large amount of moisture from the brine to condense out of the gas stream. Cooling also improves the efficiency of both the compression and the liquefaction stage that follows. Chlorine exiting is ideally between 18°C and 25°C. After cooling the gas stream passes through a series of towers with counter flowing sulfuric acid. These towers progressively remove any remaining moisture from the chlorine gas. After exiting the drying towers the chlorine is filtered to remove any remaining sulfuric acid.

Compression and liquefaction

Several methods of compression may be used: liquid ring, reciprocating, or centrifugal. The chlorine gas is compressed at this stage and may be further cooled by inter- and after-coolers. After compression it flows to the liquefiers, where it is cooled enough to liquefy. Non condensible gases and remaining chlorine gas are vented off as part of the pressure control of the liquefaction systems. These gases are routed to a gas scrubber, producing sodium hypochlorite, or used in the production of hydrochloric acid (by combustion with hydrogen) or ethylene dichloride (by reaction with ethylene).

Storage and loading

Liquid chlorine is typically gravity-fed to storage tanks. It can be loaded into rail or road tankers via pumps or padded with compressed dry gas.

Caustic handling, evaporation, storage and loading

Caustic, fed to the cell room flows in a loop that is simultaneously bled off to storage with a part diluted with deionized water and returned to the cell line for strengthening within the cells. The caustic exiting the cell line must be monitored for strength, to maintain safe concentrations. Too strong or too weak a solution may damage the membranes. Membrane cells typically produce caustic in the range of 30% to 33% by weight. The feed caustic flow is heated at low electrical loads to control its exit temperature. Higher loads require the caustic to be cooled, to maintain correct exit temperatures. The caustic exiting to storage is pulled from a storage tank and may be diluted for sale to customers who require weak caustic or for use on site. Another stream may be pumped into a multiple effect evaporator set to produce commercial 50% caustic. Rail cars and tanker trucks are loaded at loading stations via pumps.

Hydrogen handling

Hydrogen produced may be vented unprocessed directly to the atmosphere or cooled, compressed and dried for use in other processes on site or sold to a customer via pipeline, cylinders or trucks. Some possible uses include the manufacture of hydrochloric acid or hydrogen peroxide, as well as desulfurization of petroleum oils, or use as a fuel in boilers or fuel cells. In Porsgrunn the byproduct is used for the hydrogen fueling station at hynor.

Energy consumption

Production of chlorine is extremely energy intensive.^[27] Energy consumption per unit weight of product is not far below that for iron and steel manufacture^[28] and greater than for the production of glass^[29] or cement.^[30]

Since electricity is an indispensable raw material for the production of chlorine, the energy consumption corresponding to the electrochemical reaction cannot be reduced. Energy savings arise primarily through applying more efficient technologies and reducing ancillary energy use.

Compounds

See also Chlorine compounds

For general references to the chloride ion (Cl⁻), including references to specific chlorides, see chloride. For other chlorine compounds see chlorate (ClO₃⁻), chlorite (ClO₂⁻), hypochlorite(ClO⁻), and perchlorate(ClO₄⁻), and chloramine (NH₂Cl).^[31]

Other chlorine-containing compounds include:

• Fluorides: chlorine monofluoride (ClF), chlorine trifluoride (ClF₃), chlorine pentafluoride (ClF₅)
• Oxides: chlorine dioxide (ClO₂), dichlorine monoxide (Cl₂O), dichlorine heptoxide (Cl₂O₇)
• Acids: hydrochloric acid (HCl), chloric acid (HClO₃), and perchloric acid (HClO₄)

Oxidation states

Oxidation state	Name	Formula	Example compounds
−1	chlorides	Cl−	ionic chlorides, organic chlorides, hydrochloric acid
0	chlorine	Cl2	elemental chlorine
+1	hypochlorites	ClO−	sodium hypochlorite, calcium hypochlorite
+3	chlorites	ClO2−	sodium chlorite
+5	chlorates	ClO3−	sodium chlorate, potassium chlorate, chloric acid
+7	perchlorates	ClO4−	potassium perchlorate, perchloric acid,magnesium perchlorate organic perchlorates, ammonium perchlorate

Chlorine exists in all odd numbered oxidation states from −1 to +7, as well as the elemental state of zero. Progressing through the states, hydrochloric acid can be oxidized using manganese dioxide, or hydrogen chloride gas oxidized catalytically by air to form elemental chlorine gas. The solubility of chlorine in water is increased if the water contains dissolved alkali hydroxide. This is due to disproportionation:

Cl₂ + 2OH⁻ → Cl⁻ + ClO⁻ + H₂O

In hot concentrated alkali solution disproportionation continues:

2ClO⁻ → Cl⁻ + ClO₂⁻

ClO⁻ + ClO₂⁻ → Cl⁻ + ClO₃⁻

Sodium chlorate and potassium chlorate can be crystallized from solutions formed by the above reactions. If their crystals are heated, they undergo the final disproportionation step.

4ClO₃⁻ → Cl⁻ + 3ClO₄⁻

This same progression from chloride to perchlorate can be accomplished by electrolysis. The anode reaction progression is:^[32]

Reaction	Electrode potential
Cl− + 2OH− → ClO− + H2O + 2e−	+0.89 volts
ClO− + 2OH− → ClO2− + H2O + 2e−	+0.67 volts
ClO2− + 2OH− → ClO3− + H2O + 2e−	+0.33 volts
ClO3− + 2OH− → ClO4− + H2O + 2e−	+0.35 volts

Each step is accompanied at the cathode by

2H₂O + 2e⁻ → 2OH⁻ + H₂          −0.83 volts

Applications and uses

Production of industrial and consumer products

Chlorine's principal applications are in the production of a wide range of industrial and consumer products.^[33][34] For example, it is used in making plastics, solvents for dry cleaning and metal degreasing, textiles, agrochemicals and pharmaceuticals, insecticides, dyestuffs, etc.

Purification and disinfection

Chlorine is an important chemical for water purification(Such as water treatment plants), in disinfectants, and in bleach. Chlorine in water is more than three times more effective as a disinfectant against Escherichia coli than an equivalent concentration of bromine, and is more than six times more effective than an equivalent concentration of iodine.^[35]

Chlorine is usually used (in the form of hypochlorous acid) to kill bacteria and other microbes in drinking water supplies and public swimming pools. However, in most private swimming pools chlorine itself is not used, but rather sodium hypochlorite (household bleach), formed from chlorine and sodium hydroxide, or solid tablets of chlorinated isocyanurates. Even small water supplies are now routinely chlorinated.^[36] (See also chlorination)

Chemistry

Elemental chlorine is an oxidizer. It undergoes halogen substitution reactions with lower halide salts. For example, chlorine gas bubbled through a solution of bromide or iodide anions oxidizes them to bromine and iodine respectively.

Like the other halogens, chlorine participates in free-radical substitution reactions with hydrogen-containing organic compounds. This reaction is often – but not invariably – non-regioselective, and hence may result in a mixture of isomeric products. It is often difficult to control the degree of substitution as well, so multiple substitutions are common. If the different reaction products are easily separated, e.g. by distillation, substitutive free-radical chlorination (in some cases accompanied by concurrent thermal dehydrochlorination) may be a useful synthetic route. Industrial examples of this are the production of methyl chloride, methylene chloride, chloroform and carbon tetrachloride from methane, allyl chloride from propylene, and trichloroethylene and tetrachloroethylene from 1,2-dichloroethane.

Like the other halides, chlorine undergoes electrophilic additions reactions, most notably, the chlorination of alkenes and aromatic compounds with a Lewis acid catalyst. Organic chlorine compounds tend to be less reactive in nucleophilic substitution reactions than the corresponding bromine or iodine derivatives, but they tend to be cheaper. They may be activated for reaction by substituting with a tosylate group, or by the use of a catalytic amount of sodium iodide.

Chlorine is used extensively in organic and inorganic chemistry as an oxidizing agent and in substitution reactions because chlorine often imparts many desired properties to an organic compound, due to its electronegativity.

Chlorine compounds are used as intermediates in the production of a number of important commercial products that do not contain chlorine. Examples are: polycarbonates, polyurethanes, silicones, polytetrafluoroethylene, carboxymethyl cellulose and propylene oxide.

Use as a weapon

• World War I

Main article: Poison gas in World War I

Chlorine gas, also known as bertholite, was first used as a weapon in World War I by Germany on April 22, 1915 in the Second Battle of Ypres. As described by the soldiers it had a distinctive smell of a mixture between pepper and pineapple. It also tasted metallic and stung the back of the throat and chest. Chlorine can react with water in the mucosa of the lungs to form hydrochloric acid, an irritant which can be lethal. The damage done by chlorine gas can be prevented by a gas mask which makes the deaths by chlorine gas much lower than those of other chemical weapons. It was pioneered by a German scientist later to be a Nobel laureate, Fritz Haber of the Kaiser Wilhelm Institute in Berlin, in collaboration with the German chemical conglomerate IG Farben, who developed methods for discharging chlorine gas against an entrenched enemy. It is alleged that Haber's role in the use of chlorine as a deadly weapon drove his wife, Clara Immerwahr, to suicide. After its first use, chlorine was utilized by both sides as a chemical weapon, but it was soon replaced by the more deadly gases phosgene and mustard gas.^[37]

• Iraq War

Main article: 2007 chlorine bombings in Iraq

Chlorine gas has also been used by insurgents against the local population and coalition forces in the Iraq War in the form of Chlorine bombs. On March 17, 2007, for example, three chlorine filled trucks were detonated in the Anbar province killing two and sickening over 350.^[38] Other chlorine bomb attacks resulted in higher death tolls, with more than 30 deaths on two separate occasions.^[39] Most of the deaths were caused by the force of the explosions rather than the effects of chlorine, since the toxic gas is readily dispersed and diluted in the atmosphere by the blast. The Iraqi authorities have tightened up security for chlorine, which is essential for providing safe drinking water for the population.

Chlorine cracking

The element is widely used for purifying water owing to its powerful oxidising properties, especially potable water supplies and water used in swimming pools. Several catastrophic collapses of swimming pool ceilings have occurred owing to stress corrosion cracking of stainless steel rods used to suspend them. Some polymers, however, are sensitive to attack, including acetal resin and polybutene. Both materials were used in hot and cold water domestic supplies, and stress corrosion cracking caused widespread failures in the USA in the 1980s and 90's. One example shows an acetal joint in a water supply system, which when it fractured, caused substantial physical damage to computers in the labs below the supply. The cracks started at injection moulding defects in the joint and grew slowly until finally triggered. The fracture surface shows iron and calcium salts which were deposited in the leaking joint from the water supply before failure.

Other uses

Chlorine is used in the manufacture of numerous organic chlorine compounds, the most significant of which in terms of production volume are 1,2-dichloroethane and vinyl chloride, intermediates in the production of PVC. Other particularly important organochlorines are methyl chloride, methylene chloride, chloroform, vinylidene chloride, trichloroethylene, perchloroethylene, allyl chloride, epichlorohydrin, chlorobenzene, dichlorobenzenes and trichlorobenzenes.

Chlorine is also used in the production of chlorates and in bromine extraction.

Health Effects

Chlorine is a toxic gas that irritates the respiratory system. Because it is heavier than air, it tends to accumulate at the bottom of poorly ventilated spaces. Chlorine gas is a strong oxidizer, which may react with flammable materials.^[40]

Chlorine is detectable in concentrations of as low as 1 ppm. Coughing and vomiting may occur at 30 ppm and lung damage at 60 ppm. About 1000 ppm can be fatal after a few deep breaths of the gas.^[4] Breathing lower concentrations can aggravate the respiratory system, and exposure to the gas can irritate the eyes.^[41]

See also

• Chloride
• Polymer degradation

References

External links

• Chlorine Institute - Trade association and lobby group representing the interests of the chlorine industry
• Chlorine Online - Chlorine Online is an information resource produced by Eurochlor - the business association of the European chlor-alkali industry
• Computational Chemistry Wiki
• Chlorine Production Using Mercury, Environmental Considerations and Alternatives
• National Pollutant Inventory - Chlorine
• National Institute for Occupational Safety and Health - Chlorine Page
• WebElements.com — Chlorine

Diatomic chemical elements Hydrogen H2 | Nitrogen N2 | Oxygen O2 | Fluorine F2 | Chlorine Cl2 | Bromine Br2 | Iodine I2 | Astatine At2 | Phosphorus P4 | Sulphur S8

Chemical warfare Blood agents Cyanogen chloride (CK) · Hydrogen cyanide (AC) Blister agents Lewisite (L) · Sulfur mustard gas (HD, H, HT, HL, HQ) · Nitrogen mustard gas (HN1, HN2, HN3) Nerve agents G-Agents: Tabun (GA) · Sarin (GB) · Soman (GD) · Cyclosarin (GF) · GV — V-Agents: VE · VG · VM · VR · VX — Novichok agents Pulmonary agents Chlorine · Chloropicrin (PS) · Phosgene (CG) · Diphosgene (DP) Incapacitating agents Agent 15 (BZ) · EA-3167 · KOLOKOL-1 Riot control agents Pepper spray (OC) · CS gas · CN gas (mace) · CR gas

E numbers Colours (E100–199) • Preservatives (E200–299) • Antioxidants & Acidity regulators (E300–399) • Thickeners, stabilisers & emulsifiers (E400–499) • pH regulators & anti-caking agents (E500–599) • Flavour enhancers (E600–699) • Miscellaneous (E900–999) • Additional chemicals (E1100–1599) Waxes (E900–909) • Synthetic glazes (E910–919) • Improving agents (E920–929) • Packaging gases (E930–949) • Sweeteners (E950–969) • Foaming agents (E990–999) L-cysteine (E920) • L-cystine (E921) • Potassium persulfate (E922) • Ammonium persulfate (E923) • Potassium bromate (E924) • Chlorine (E925) • Chlorine dioxide (E926) • Azodicarbonamide (E927) • Carbamide (E927b) • Benzoyl peroxide (E928)

Periodic table
H																															He
Li	Be																									B	C	N	O	F	Ne
Na	Mg																									Al	Si	P	S	Cl	Ar
K	Ca															Sc	Ti	V	Cr	Mn	Fe	Co	Ni	Cu	Zn	Ga	Ge	As	Se	Br	Kr
Rb	Sr															Y	Zr	Nb	Mo	Tc	Ru	Rh	Pd	Ag	Cd	In	Sn	Sb	Te	I	Xe
Cs	Ba	La	Ce	Pr	Nd	Pm	Sm	Eu	Gd	Tb	Dy	Ho	Er	Tm	Yb	Lu	Hf	Ta	W	Re	Os	Ir	Pt	Au	Hg	Tl	Pb	Bi	Po	At	Rn
Fr	Ra	Ac	Th	Pa	U	Np	Pu	Am	Cm	Bk	Cf	Es	Fm	Md	No	Lr	Rf	Db	Sg	Bh	Hs	Mt	Ds	Rg	Uub	Uut	Uuq	Uup	Uuh	Uus	Uuo
Alkali metals Alkaline earth metals Lanthanoids Actinoids Transition metals Other metals Metalloids Other nonmetals Halogens Noble gases