Wurzbach Parkway

From Wikipedia, the free encyclopedia

0px
Wurzbach Parkway
Maintained by TxDOT
West end: Lockhill-Selma Road in San Antonio
East end: O'Connor Road in San Antonio
Highways in Texas

Wurzbach Parkway is a part freeway and part major arterial road in San Antonio, Texas built to provide relief on Interstate 410 and Loop 1604 on the city's northside. The highway is named for Harry M. Wurzbach, a U.S. Congressman from San Antonio, whose name was first applied to the connecting Wurzbach Road. The highway is in different stages of completion with the eastern third built as a freeway and the western section as an expressway with at-grade intersections. Currently there is a gap in the highway, but there are plans to connect the two segments with an interchange with U.S. Highway 281.[1] The highway, along with part of Wurzbach Road near the Ingram Park Mall, is maintained by the Texas Department of Transportation despite not carrying a state highway designation. Rather, it is being developed and maintained under the Principal Arterial Street System (PASS) program.[2][3] The parkway does not connect to any other freeways, but drivers can access I-10, US 281, and I-35 via local roads that extend the parkway.

Contents

[edit] Route description

The west portion of the parkway is a limited-access surface road that connects Lockhill-Selma Road with Blanco Road (FM 2696), crossing Military Highway (FM 1535) at-grade. Wurzbach Road continues southwest from Lockhill-Selma Road, crossing I-10 at exit 561. To the east, a second section, built as a freeway, begins at Starcrest Drive (which continues northwest towards US 281) and Wetmore Road, on the northeast side of the San Antonio International Airport, and heads east beyond Thousand Oaks Drive. At the east end are several at-grade intersections before the parkway ends at O'Connor Road and Crosswinds Way; O'Connor Road leads southeast to I-35 at exit 169.[4]

[edit] History

Planners conceived the parkway in the mid-1980s as the East-West Parkway, an extension of the existing Wurzbach Road, to relieve traffic on I-410. The road, estimated to cost $90 million,[5] was approved by the Texas Transportation Commission in 1988, to be built by the state but funded in part by the city.[6] Construction began in mid-1994 on the section between Wetmore Road and Nacogdoches Road,[7] and the eastern portion of the roadway opened on August 26, 1999, allowing traffic to bypass I-410.[8] The west section was opened on July 24, 2002,[9] but work has yet to begin on the connection between these two portions.

[edit] Future

The Alamo Regional Mobility Authority (RMA) is currently conducting a supplemental environmental assessment on the entire corridor from Lockhill-Selma Road to I-35, emphasizing the segment that has not been constructed. The EA will supplement the EA completed several years ago prior to initial construction.[10] The Alamo RMA is currently considering three alternatives for the interchange with US 281. The first alterative is a Wurzbach Parkway bridge over US 281 with no direct connection between the two highways, but with access via the two highway's frontage roads.[11] The second option includes an elevated roundabout interchange, that will provide direct access between the highways.[12] The final alternative involves main lane to main lane connector ramps from Wurzbach Parkway to US 281 and loop ramps for access from US 281 to Wurzbach Parkway.[13]

[edit] Exit list

County Location Mile Destinations Notes
Bexar San Antonio Starcrest Drive Westbound only
Wetmore Road
Nacogdoches Road
FM 2252 (Perrin-Beitel Road)
Thousand Oaks Drive
Turnaround Eastbound only
Weidner Road At-grade junction
O'Connor Road, Crosswinds Way At-grade junction

[edit] References