Wolseley Ten
From Wikipedia, the free encyclopedia
| Wolsley Ten | |
|---|---|
| Manufacturer | Wolseley Motor Company |
| Production | 1939–1948 7976 made |
| Assembly | Ward End Works, Birmingham, UK. |
| Predecessor | Wolseley 10/40 |
| Successor | Wolseley 4/50 |
| Body style(s) | 2-door saloon 4-door saloon drophead coupé |
| Engine(s) | 1140cc overhead valve four cylinder |
| Transmission(s) | 4-speed manual |
| Wheelbase | 90 in (2,300 mm)[1] |
| Length | 147 in (3,700 mm)[1] |
| Width | 57 in (1,400 mm)[1] |
The Wolseley Ten was a light saloon car produced by the Wolseley Motor Company in 1939 and 1945 to 1948 .
The ten horsepower class of cars was an important part of the market in 1930s Britain and Wolseley entered the sector with their 10/40 of 1936 based on the contemporary Morris Ten. Both Morris and Wolseley were part of the Nuffield Organisation. The 10/40 ceased production in 1937 and it was not until February 1939 that Wolseley introduced a new car the Ten.
The new car was again based on the Morris Ten, this time the 1938 Series M but with an important difference. Whereas the Morris car had a semi unitary construction, the Wolseley had a substantial steel section chassis with cruciform bracing. Many of the steel body pressings were shared. To keep the weight down, the wheelbase at 90 in (2,300 mm) was 4 in (100 mm) shorter than the Morris. Suspension was not independent and used semi elliptic leaf springs all round. Lockheed hydraulic drum brakes were fitted. The 1140 cc engine designated XPJW was also slightly more powerful than the one in the Morris delivering 40bhp as against 37bhp.[2]
As the car was intended to compete in the up-market sector it was well equipped with leather upholstery, pile carpets and walnut trim. The seats were early users of Dunlopillo foam rubber, rather than traditional metal coil springs, possibly the first mass produced car to use this new material[2]. The steering column was adjustable for both angle and reach. At launch the car was priced at £215, £40 more than the Morris with the option of a built in Jackall system that could hydraulically lift a wheel off the ground for tyre changing an extra £5.[2].
In June 1939 the saloon was joined by a factory built two door drophead coupé priced at £270 but very few seem to have been made. London dealer Eustace Watkins also offered their own drophead version. With the outbreak of World War II in 1939 production of Wolseley cars including the Ten stopped. 5261 of the model had been made[3].
Production restarted in September 1945 but without the drophead version. the price had risen considerably to £474 (partly due to higher taxes) against the Morris's £378. The Ten was finally dropped in 1948 after 2715 more had been built[4] when the first of the post war designs arrived. The new small Wolseley was the 4/50 but with a 1.5 litre engine was a larger car and not a real replacement. With the Nuffield Organisation joining Morris in BMC this sector of the market would be left to Austin and Morris.
[edit] References
- ^ a b c Culshaw; Horrobin (1974). Complete Catalogue of British Cars. London: Macmillan. ISBN 0-333-16689-2.
- ^ a b c Wood, Jonathan (November 1999). Badge Engineering. The Automobile (magazine). ISSN 0955-1328.
- ^ Sedgwick, M.; Gillies (1989). A-Z of Cars of the 1930s. Devon, UK: Bay View Books. ISBN 1-870979-38-9.
- ^ Robson, Graham (2000). A to Z of British Cars 1945-1980. Devon, UK: Herridge. ISBN 0-9541063-9-3.
