V10 engine

From Wikipedia, the free encyclopedia

The Dodge Viper V10
The Dodge Viper V10

A V10 engine is a V engine with 10 cylinders in two banks of five.

Contents

[edit] Mechanicals

The V10 configuration is not an inherently balanced design like a straight-6 or V12. It can be balanced with crankshaft counterweights as an odd firing 90 degree V engine (BMW M5, Dodge Viper). It can be balanced with a balance shaft as an even firing 72 degree engine, or with a split crankshaft journal 90 degree V angle (Lamborghini Gallardo, Ford 6.8 V10).

[edit] Road cars

Until recently V10s had rarely been a popular configuration for road cars: a V12 is only slightly more complicated and runs more smoothly and a V8 is less complex and more economical. Nevertheless, modern engineering has made it possible to use V-10 engines for applications where a V-8 would produce insufficient power and a V-12 would be too complicated or bulky.

Dodge was the first to develop a modern V-10 engine, originally designing a version of its LA series small block for use in trucks. However, the engine saw its first production use in substantially revised form in the Dodge Viper. The original truck version of the engine was eventually used starting in 1994 in the Dodge Ram. It discontinued in that application after 2003. However, 2003 also saw the introduction of the Ram SRT-10, a performance model meant to rival Ford's successful F-150 SVT Lightning. The Viper engine (a 90-degree engine with odd firing order to obviate the need for a balance shaft) has been tweaked through the years, and now produces 600 horsepower (447 kW) in a standard state of tune from its 8.4 liter displacement. The engine is also used by Bristol, in tuned form, in their two-seat Fighter coupe, where it can produce upward of 630 horsepower (470 kW).

Ford also developed a heavy-duty V-10 version of their Triton engine to replace the aging 460 big block in truck applications. It was introduced in the E-Series/Econoline full-size van, and also saw duty in the F-Series Super Duty line and the Ford Excursion SUV, and is still in production in 2008.

E-60 BMW M5 V-10
E-60 BMW M5 V-10

European marques were slower to adopt the V-10 configuration. However, high-revving V-10 powerplants were incorporated into supercars from Lamborghini and Porsche, and BMW and Audi later unveiled ten-cylinder versions of their mid-range sedans (the 5-Series and A6 families, respectively). Interestingly, Volkswagen developed a ten-cylinder engine as well, but as a turbodiesel.

A list of post-war V-10-engined production cars (sorted alphabetically by manufacturer, sub-sorted by year of introduction):

[edit] Racing

The most widespread use of the V10 has been in Formula 1 racing. Alfa Romeo made the first modern Formula One V10 in 1986; it was never used in Formula One car though .[1] Later the configuration was introduced by Honda and Renault before the 1989 season. The introduction of the 3 litre rule made the V10 seem the best compromise between the V8 and the V12. Renault had a more flat 110° angle motor in 2002 and 2003, but reverted to a more conventional layout (a 72° angle) following the change in rules which dictated that an engine must last two race weekends. In a further change to the rules, V10s were banned for the 2006 season in favour of 2.4 litre V8s.

There are also cars with V10 engines in sports car racing, usually with Judd powerplants with 4 or 5 litre engines, made available for customers, although the first V10 was seen in the works Peugeot 905, in the final races of the 1990 World Endurance Champ.

[edit] Notes

  1. ^ 164 Pro-Car. velocetoday.com. Retrieved on 2007-12-28.