Uralmash
From Wikipedia, the free encyclopedia
Uralmash (Russian: Уральский Машиностроительный завод - Уралмаш / Uralsky Mashinostroitelny zavod, Ural Machine-building plant) is a heavy machine production facility of the Russian engineering corporation OMZ. The facility is located in Yekaterinburg, Russia.
[edit] History
The Ural Heavy Machine Building Plant (Uralmashzavod or UZTM) began operations in 1933 in compliance with the plans of the Government of the USSR for the industrialization of the country. During the pre-World War II period, Uralmash manufactured its products (blast furnace equipment, sintering machines, rolling mills, presses, cranes, etc.) for the mining and metallurgical industries located in the Urals and Siberia. The majority of these products were produced from individual designs. At the same time the plant began to develop military equipment, with the production of F.F. Petrov designed Howitzer M-30.
During World War II large-scale production of armoured materiel was organized at the plant. At first the plant manufactured armoured tank hulls, later expanding to production of T-34 tanks and the SU-122, SU-85, and SU-100 gun tank destroyers based on the T-34 tank design. The self-propelled gun mounts built at Uralmash demonstrated their effectiveness on the battlefield as a successful combination of maneuverability of T-34 tanks and huge fire power of ordnance pieces.
After World War II, the state made large investments in the reconstruction and expansion of the Uralmash plant. This modernisation favoured both increased output and the production of new machines and equipment--shovels, drilling rigs, crushers and mills.
In the 1950s the state began efforts to equip the aviation and rocket industries with heavy hydraulic presses. Uralmash, in response to this new demand, created a range of this type of equipment.
In 1949 the plant produced the first dragline excavator. In 1960s the plant designed and manufacturesed draglines with booms 90-100 m long. Now more than 200 walking draglines are in operation at mines in Siberia and the Far East. One third of the total coal amount produced by the open casting is mined with the help of draglines.
The drilling rigs manufactured by URALMASH were of prime importance in the development of oil and gas regions of the USSR, including West Siberia with its severe climate. The extra deep drilling rigs designed and manufactured at the plant made it possible to reach the depth of 13 km (at the Kola Superdeep Borehole) and to obtain for the first time rock samples approximately 3 billion years old. In addition to land-based rigs, Uralmash also designs off-shore drilling equipment.
In accordance with Russian Federation law, Uralmash was transformed in December 1992 into an open-end joint stock company under the name "The Ural Heavy Machine Building Plant". In 1996 Uralmash it became part of OMZ, one of Russia's largest engineering corporations, founded and initially led by Kakha Bendookidze.
In February 2007 OMZ and Metalloinvest agreed to create a common manufacturing complex. OMZ contributed its holdings in URALMASH to the joint venture while Metalloinvest contributed its holdings in ORMETO-YuUMZ. The consolidation will result in the creation of a large machine-building conglomerate with a leading position in the CIS metallurgical equipment market with a joint market share in the metallurgical equipment segment in Russia exceeding 40%.
The present Director of URALMASH is Nazim Efendiev.
