United States one-dollar bill

From Wikipedia, the free encyclopedia

Obverse of the $1 bill
Obverse of the $1 bill
Reverse of the $1 bill
Reverse of the $1 bill

The United States one-dollar bill ($1) is a denomination of U.S. currency, and is also the most common. The first president, George Washington, painted by Gilbert Stuart, is currently featured on the obverse, while the Great Seal of the United States is featured on the reverse. The one-dollar bill has the second oldest design of all U.S. currency currently being produced, after the two dollar bill. The obverse debuted in 1963 when the $1 bill first became a Federal Reserve Note.

The inclusion of "In God We Trust" on all currency was required by law in 1955. The national motto first appeared on paper money in 1957.

An individual dollar bill is also less formally known as a one, or a single.

The Bureau of Engraving and Printing says the average life of a $1 bill in circulation is 18 months before it is replaced due to wear. Approximately 45% of all U.S. currency produced today are one-dollar bills.[1]

All $1 bills produced today are Federal Reserve Notes. One-dollar bills are delivered by Federal Reserve Banks in blue straps.

Contents

[edit] History

[edit] Large size notes

First $1 bill issued in 1862 as a Legal Tender Note
First $1 bill issued in 1862 as a Legal Tender Note

(approximately 7.4218 × 3.125 in ≅ 189 × 79 mm)

  • 1862: The first $1 bill was issued as a Legal Tender Note (United States Note) with a portrait of Salmon P. Chase, the Secretary of the Treasury under President Abraham Lincoln.[2]
  • 1869: The $1 United States Note was redesigned with a portrait of George Washington in the center and a vignette of Christopher Columbus sighting land to the left. The obverse of the note also featured green and blue tinting. Although this note is technically a United States Note, TREASURY NOTE appeared on it instead of UNITED STATES NOTE.
  • 1874: The Series of 1869 United States Note was revised. Changes on the obverse included removing the green and blue tinting, adding a red floral design around the word WASHINGTON D.C., and changing the term TREASURY NOTE to UNITED STATES NOTE. The reverse was completely redesigned. This note was also issued as Series of 1875 and 1878.
  • 1880: The red floral design around the words ONE DOLLAR and WASHINGTON D.C. on the United States Note was removed.
  • 1886: The first woman to appear on U.S. currency, Martha Washington, was featured on the $1 Silver Certificate. The reverse of the note featured an ornate design which occupied the entire note, excluding the borders.
Series of 1886 $1 Silver Certificate featuring Martha Washington
Series of 1886 $1 Silver Certificate featuring Martha Washington
  • 1890: One-dollar Treasury or "Coin Notes" were issued for government purchases of silver bullion from the silver mining industry. The reverse featured the large word ONE in the center surrounded by an ornate design which occupied almost the entire note.
  • 1891: The reverse of the Series of 1890 Treasury Note was redesigned because the treasury felt that it was too "busy" which would make it too easy to counterfeit. More open space was incorporated into the new design.
  • 1891: The reverse of the $1 Silver Certificate was redesigned. More open space was incorporated into the new design.
  • 1896: The famous "Educational Series" Silver Certificate was issued. The entire obverse was covered with artwork of allegorical figures representing "history instructing youth" in front of Washington D.C. The reverse featured portraits of George and Martha Washington surrounded by an ornate design which occupied almost the entire note.
Famous 1896 "Educational Series" $1 Silver Certificate
Famous 1896 "Educational Series" $1 Silver Certificate
  • 1899: The $1 Silver Certificate was again redesigned. The obverse featured a vignette of the U.S. Capitol building behind a Bald Eagle perched on an American Flag. Below that were small portraits of Abraham Lincoln to the left and Ulysses S. Grant to the right.
  • 1917: The obverse of the $1 United States Note was changed slightly with the removal of ornamental frames which surrounded the serial numbers.
  • 1918: The only large-sized, Federal Reserve Note-like $1 bill was issued as a Federal Reserve Bank Note(not to be confused with Federal Reserve Notes). Each note was an obligation of the issuing Federal Reserve Bank and could only be redeemed at that corresponding bank. The obverse of the note featured a borderless portrait of George Washington to left and wording in the entire center. The reverse featured a Bald Eagle in flight clutching an American Flag.
  • 1923: Both the one-dollar United States Note and Silver Certificate were redesigned. Both notes featured the same reverse and an almost identical obverse with the same border design and portrait of George Washington. The only difference between the two notes was the color of ink used for the numeral 1 crossed by the word DOLLAR, treasury seal, and serial numbers along with the wording of the obligations. These dollar bills were the first and only large size notes with a standardized design for different types of notes of the same denomination; this same concept would later be used on small size notes.

[edit] Small size notes

First small-sized $1 bill which was issued as a Silver Certificate
First small-sized $1 bill which was issued as a Silver Certificate
Common reverse of $1 Silver Certificates (Series of 1928-1934) and $1 United States Notes (Series of 1928)
Common reverse of $1 Silver Certificates (Series of 1928-1934) and $1 United States Notes (Series of 1928)

(6.14 × 2.61 × 0.0043 in = 155.956 × 66.294 mm × 0.10922 mm)

In 1929, all currency was changed to its current size. Initially, the one-dollar bill was issued as Silver Certificate only under Series of 1928. The treasury seal and serial numbers on it were dark blue. The obverse was nearly identical to the Series of 1923 $1 Silver Certificate, but the treasury seal featured spikes around it and a large gray ONE to the left replaced the blue "1 DOLLAR". The reverse, too, had the same border design as the Series of 1923 $1 bill, but the center featured a large ornate ONE superimposed by ONE DOLLAR. These $1 Silver Certificates were issued until 1934.

In 1933, $1 United States Notes were issued to supplement the supply of $1 Silver Certificates. Its treasury seal and serial numbers were red. However, a month after their production, it was realized that there would be no real need for these notes and production was stopped. A small number of these $1 bills entered circulation and the rest were kept in treasury vaults until 1949 when they were issued in Puerto Rico.

In 1934, the design of the $1 Silver Certificate was changed to reflect the Silver Purchase Act of 1934. Under Washington's portrait, ONE SILVER DOLLAR was changed to ONE DOLLAR due to the fact that Silver Certificates could be redeemed for silver bullion. The treasury seal was moved to the right and superimposed over ONE, and a blue numeral 1 was added to the left. The reverse remained the same.

A year later, in 1935, the design of the one-dollar bill was changed again. On the obverse, the blue numeral 1 was changed to gray and made smaller, the gray ONE to the left was removed, the treasury seal was made smaller and superimposed by WASHINGTON D.C., and a stylized ONE DOLLAR was added over the treasury seal. The reverse was also changed to its current design, except for the absence of IN GOD WE TRUST.

Special issue $1 Silver Certificate for Allied troops in North Africa
Special issue $1 Silver Certificate for Allied troops in North Africa

World War II brought about special issues of one-dollar bills in 1942. Special $1 Silver Certificates were issued for Hawaii in case of a Japanese invasion. HAWAII was printed vertically on the left and right side of the obverse and also horizontally across the reverse. The seal and serial numbers were changed to brown. Special Silver Certificates were also issued as payment for Allied troops in North Africa about to begin their assault into Europe. The only difference on these one-dollar bills was a yellow instead of blue seal. Both of these types of notes could be declared worthless if they fell into enemy hands.

The next change came in 1957 when the $1 bill became the first piece of U.S. currency to bear the motto IN GOD WE TRUST; it was added over the word ONE on the reverse. Initially the BEP began printing the motto on notes which were printed with the new 32 note press, but soon Series of 1935G bills printed on a 16 note press featured the motto.

The final production of $1 Silver Certificates occurred in late 1963. In 1964 the redemption of Silver Certificates for silver coin ended and in 1968 the redemption of Silver Certificates for silver bullion ended.

Production of one-dollar Federal Reserve Notes was undertaken in late 1963 to replace the soon-to-be obsolete $1 Silver Certificate. The design on the reverse remained the same, but the border design on the obverse was completely redesigned and the serial numbers and treasury seal were printed in green ink. This was the first time the one-dollar bill was printed as a Federal Reserve Note.

In 1969 the $1 bill began using the new treasury seal with wording in English instead of Latin. Excluding the signatures and series date, the design of the one-dollar bill has remained the same ever since then.

Though bill denominations of $5 and higher have been redesigned twice since 1995 as part of ongoing anti-counterfeiting efforts, there are currently no plans to redesign the $1 bill.

[edit] Experimental issues

Main article: Web notes

Over numerous years the one-dollar bill has served as the exclusive circulating denomination of several experiments.

The first experiment was conducted in January and February of 1933 to test different ratios of cotton and linen used in the paper of dollar bills. Series of 1928A and 1928B $1 Silver Certificates with serial number block letters X-B and Y-B were used as the experimental group; the Z-B block was used as the control group. Test results were inconclusive.

Another test was done in 1937 which was similar in style to the 1933 experiment. Series 1935 one-dollar bills were used once again. The particular notes used in this experiment can be identified by their serial numbers. Notes ranging from A00000001B–A06180000B and B00000001B–B03300000B were the experimental group and notes ranging from C00000001B–C03300000B were part of the control group. No conclusive results were found.

A more well-known test was done in 1942 during World War II to test alternative types of paper; this was a precautionary measure in case the current type of paper supply could not be maintained. Series 1935A notes made of the special paper were printed with a red "S" to the right of the treasury seal and notes of the control group were printed with a red "R". Fake red S's and R's have been applied to regular Series 1935A notes to try and pass them at a higher value; checking a note's serial numbers can prevent this. Serial numbers of the R group range from S70884001C–S7206800C and serial numbers of the S group range from S73884001C–S7506800C.

One-dollar bills were again the subject of experimentation in May 1992 when the BEP began to test a web-fed press. Instead of printing one side of a square sheet of 32 notes at a time, a web-fed press used 96 plates to print both sides of notes from a continuous roll of paper. The notes were issued in Series 1988A, 1993, and 1995. Because of mechanical problems as well as the sometimes poor quality of the notes, the test was ended in July 1996. Web notes can be identified by the back plate number next to IN GOD WE TRUST and the removal of face check letters and quadrant numbers.[3]

[edit] Obverse of current $1 bill

Detail of the Treasury Seal as it appears on the one-dollar bill
Detail of the Treasury Seal as it appears on the one-dollar bill
Example Federal Reserve Bank Seal as it appears on a one-dollar bill
Example Federal Reserve Bank Seal as it appears on a one-dollar bill

The portrait of George Washington is displayed in the center of the obverse of the one-dollar bill, as it has been since the 1869 design.

To the left of George Washington is the Federal Reserve District Seal. The name of the Federal Reserve Bank that issued the note encircles a capital letter, (A-L), identifying it among the twelve Federal Reserve Banks. The sequential number of the bank, (1: A, 2: B, etc), is also displayed in the four corners of the open space on the bill.

To the right of George Washington is the The Treasury Department Seal. The balancing scales represent justice. The chevron with thirteen stars represents the original thirteen colonies. The key below the chevron represents authority and trust. And 1789 is the year that the Department of the Treasury was established.

Below the FRD seal (to the left of George Washington) is the signature of the Treasurer of the U.S., which occasionally varies, and below the USDT Seal (right side) is the Secretary of the Treasurers signature. To the left of the Secretary's signature is the series/year it was printed in.

On the edges are olive branches entwined around the 1's.

There is a tiny figure in the upper right hand corner of the obverse that has been attributed to be an owl or a spider.
There is a tiny figure in the upper right hand corner of the obverse that has been attributed to be an owl or a spider.

[edit] Reverse of current $1 bill

The reverse of the one-dollar bill has an ornate design which incorporates the Great Seal of the United States, and it is of noted interest to historians and numerologists for the symbols contained therein.

Detail of the Great Seal (reverse) as it appears on the one-dollar bill
Detail of the Great Seal (reverse) as it appears on the one-dollar bill

To the left is the reverse of the seal which portrays an unfinished pyramid. The separated cap of the pyramid, portraying the all-seeing eye, symbolizes that the United States is still far from finished. The shadow cast by the pyramid from the rising sun represents the undiscovered lands to the west. The sun, which is rising, represents that a new nation has begun. The Latin phrase Annuit Cœptis is located above the pyramid. Taken from the Latin words annuere (to nod, approve) and coepere (to begin, undertake), it literally means "he/it favors the things having been begun." The official translation given by the U.S. State Department, the U.S. Mint, and the U.S. Treasury is "He (God) has favored our undertakings."[4]

Novus Ordo Seclorum is shown on a ribbon below the pyramid and is a phrase taken from the fourth Ecologue of Virgil. In English, the Latin seclorum is the genitive plural form of the word saeculum, meaning "generation, century, or age." Thus the motto can be translated as "a new order of the ages". Written at the base of the pyramid in Roman Numerals is MDCCLXXVI or 1776, the year the United States Declaration of Independence was signed.

The eye above the pyramid is popular among conspiracy theorists, and alleged to have connections with the Illuminati secret society. There have also been associations made from the pyramid to the Illuminati because it has thirteen steps. The eagle on the one-dollar-bill is also carrying thirteen arrows and thirteen leaves. Furthermore, if a star of David is made on the pyramid, the letters will spell out the word "Mason" in reference to the group of Free Masonry.

To the right is the obverse of the Great Seal portraying a heraldic Bald Eagle. In front of the eagle is an unsupported shield which symbolizes the fledgling country's ability to stand on its own, unified by congress; this is symbolized by the bar on top of the shield. Above the eagle's head is a glory with 13 stars. Clutched in the eagle's beak is a ribbon which reads "E PLURIBUS UNUM" (From many, one). It also holds an olive branch (which the head always points towards) and arrows in its claws, symbolizing the desire of peace, but the readiness to fight.

President Franklin Roosevelt's conditional approval of the one-dollar bill's design in 1935, requiring that the appearance of the sides of the Great Seal be reversed, and together, captioned.
President Franklin Roosevelt's conditional approval of the one-dollar bill's design in 1935, requiring that the appearance of the sides of the Great Seal be reversed, and together, captioned.

The number thirteen, symbolizing the 13 original colonies, shows up 13 times:

  • 13 total letters/digits in both 1776 (4) and its Roman Numeral equivalent MDCCLXXVI (9)
  • 13 stars above the eagle
  • 13 steps on the Pyramid
  • 13 letters in ANNUIT COEPTIS
  • 13 letters in E PLURIBUS UNUM
  • 13 vertical bars on the shield
  • 13 horizontal stripes at the top of the shield
  • 13 leaves on the olive branch
  • 13 berries on the olive branch
  • 13 arrows
  • 13 instances of the letter N
  • 13 berries on the front of bill
  • 13 elements on either side of the base of Washington's portrait (8 leaves, 5 berries)

[edit] See also

[edit] References

  • Official 2006 Blackbook Price Guide to United States Paper Money (38th edition)
  • Standard Catalog of United States Paper Money 17th edition published by Krause Publications
  • The Official RED BOOK A Guide Book of United States Paper Money
  • Standard Guide to Small-Size U.S. Paper Money

[edit] Notes

[edit] External links


Languages