Talk:Two-lane freeway

From Wikipedia, the free encyclopedia

That's not what VFD is for. "Undivided expressway" doesn't cover all super-2s, as some have a barrier. I wish there was a better term, as while super-2 is well used, it seems to be used only by roadgeeks. --SPUI (talk) 01:31, 24 Apr 2005 (UTC)

Super 2's with barriers may be seen as divided highways on road maps; and also, some major freeways may only have brief portions of 1 for each. --SuperDude 03:10, 26 May 2005 (UTC)

Contents

[edit] Super-4

I would like the term "Super-4" to have it's own page since more examples and details for it should be put in Wikipedia. --SuperDude 23:57, 30 May 2005 (UTC)

[edit] Super-4s are usually divided!

In fact, I oppose the term "undivided expressway" because super-2 and super-4 expressways are NOT intended to be undivided. Super-2 and Super-4 are usually the intermediate construction phases (not final phases) of a freeway project.

According to these highway websites, super-4 usually does refer to a divided expressway that still has at-grade intersections.

www.expresswaysite.com

www.onthighways.com/highway_40.htm (a multi-lane divided highway but with at-grade intersections)

The term "Super-2" or "Super-4" has perhaps never been used to describe undivided roads. There are very few examples of "undivided super-4" roads. Rare examples include Ontario Highway 27 within the City of Toronto, but I believe that it is an arterial rather than an expressway. International bridges (i.e. Ambassador bridge between Windsor and Detroit) are often known as super-4s on maps.

You're actually very incorrect. Super-x denotes an undivided controlled-access highway. The divided Super-2s are, in fact, an extreme rarity, and most are actually undivided (such as Airport Parkway in Ottawa, most 100-series highways in Nova Scotia, etc). A divided four-lane highway such as you describe falls into either the Expressway or Freeway category. The Hanlon Expressway, Highway 40, etc are Expressways. Do not let Ontario's incorrect usage of the term lead you to believe that they are somehow Super-4s. They are NOT Super-4s! The only Super-4 in Ontario is Highway 27 north of the 401, which is controlled-access, yet undivided - and yes, it is officially an 'Expressway' by Toronto standards, in the same class as the DVP, the Allen, the Gardiner, etc. The Super-4 reference you make will be removed, and I recommend that you take a look at the def'n of Expressway and Freeway before re-adding it. And for this reason, I fully SUPPORT a name-change to Undivided Expressway. Snickerdo 6 July 2005 06:54 (UTC)
The only divided Super-2 I can think of off the top of my head is the Franconia Notch section of Interstate 93 in central New Hampshire. CrazyC83 05:57, 15 December 2005 (UTC)
Super-x does not denote an undivided controlled-access highway.
Although Hwy 27 may be in the class of 'Expressway' by Toronto standards, you gotta remember that Toronto's 'Expressway' system varies in quality. The Gardiner Expressway, DVP, and the Allen (south of Wilson) are actually full freeways. In fact, Hwy 27 and Kingston Road can be thought of as arterials, although the difference is that they try to limit at-grade intersections to other major arterials.


Second, the controversy over the super-x means that there is no agreed upon definition of Super-x, just like expressway is too ambiguous and varies from province/state to province. I suggest that you leave my Super-4 reference in there unless you can cite a universal reference defining what Super-4 is.


I just googled 'Super-4' and all references were to undivided 4-lane expressways. In addition, Highway 27 is classified as an Expressway, but Kingston Road is classified as an Arterial. Bit of a difference there. I'm still removing the reference until someone backs your (incorrect) claim. Snickerdo 6 July 2005 06:54 (UTC)
Every "Super-x" reference I've heard has been to a controlled-access, undivided highway (well, except Super-7...that's a lottery :)). I believe one of the state departments of transportation in the US has it as an official term, you might want to check the misc.transport.road archives on Google groups. Kirjtc2 6 July 2005 06:59 (UTC)
Some references on Google do refer to 4 lane divided highways as Super-4. Most importantly, that definition of Super-4, as divided, is consistent with your definition of Super-2: both are able to be upgraded to superhighways or full control-access freeways.
Super-x perhaps has nothing to do with whether the road is divided or not. For instance, there is no point in dividing a 2 lane road due to the narrowness of the 2-lane roadbed, but at the same time, there is no point in having a high-speed 4 lane road unless it is divided.
The problem with Highway 27 as a Super-4 is that it does violate aspects of a super-x expressway (Highway 27 does have private businesses and driveways), and thus it will never be upgraded to a superhighway or full controlled-access freeway.
Highway 27 directly north of the 401 does not have property access. Really, this is getting old. You've defaced two articles, and can't even bother to register. Time to stop. Snickerdo 7 July 2005 08:05 (UTC)
As I said earlier, your definition of Super-4 is inconsistent with your definition of Super-2 if you insist on the undivided precondition. Second, you use the term freeway incorrectly. Super-x is not a true freeway in its present form since it isn't divided and full controlled-access. I'm just leaving your Super-4 definition in there to be nice. Check www.onthighways.com, Highway 40
Highway 27 between 401 and Dixon Road is just a transitional section to accomodate the decrease in speed between the 427 collectors (freeway) to the regular Highway 27 (arterial) north of Dixon.
Actually, a full Super-2 is fully controlled access. May I recommend taking a look at the St. Thomas Expressway, the Caledonia Bypass and Airport Parkway in Ottawa? Really, you OBVIOUSLY have no clue what a Super-2 (and Super-4, for that matter) are, and I recommend not getting involved in articles of which you have poor knowledge. --Snickerdo 7 July 2005 20:48 (UTC)
Take a look at Ontario Highway 40. I rest my case. The long term plans of the MTO call for a full freeway upgrade (including replacing at-grade intersections with interchanges) if traffic levels ever get high enough. That is a good example of super-2 and super-4, since both can be upgraded to a superhighway/freeway.
I would emphasize super-x the ability to upgrade, rather than whether it is divided or not, and that is consistent with the St Thomas Expressway. It makes absolutely no sense to upgrade a super-2 into an undivided super-4, since an undivided super-4 could not potentially support the high speeds of a real freeway.

FOR THE LAST BLOODY TIME - Highway 40 is an EXPRESSWAY. Not a freeway, not a Super-whatever, a god damn EXPRESSWAY! END OF BLOODY STORY! Snickerdo 8 July 2005 05:32 (UTC)

That's kind of rude isn't it? You two might have differing opinions, but please place nice with each other! 67.43.133.84 15:51, 12 November 2005 (UTC)

[edit] For the last time... Super-4...

This is the last time I will post anything to this :talk in regards to this issue. Some references, since you can't seem to grasp reality on your own:

Super-2 : A controlled-access freeway with two lanes and without a center median. Super-4s are undivided 4-lane freeways. A Super-2 Expressway is a Super-2 with occasional at-grade intersections. [1]

A controlled-access freeway with two lanes and usually without a center median. Super 4s are undivided 4-lane freeways. A Super 2 Expressway is a Super 2 with occasional at-grade intersections; some states call these Super 2s. [2]

YOU ARE WRONG. I know that you like to use your own personal opinion and claim it as fact (see 400-Series Highway, 400-series standards section), but the rest of the world knows otherwise. Stop defacing these articles, or I will go further up the chain to ensure that your erroneous edits are prevented from being saved on Wikipedia. Snickerdo 8 July 2005 05:43 (UTC)

[edit] This super-x makes logical sense

No need to get excited. Plus, you are violating the spirit of wikipedia if you insist on a monopoly. I am not defacing this article, I am merely suggesting a more logical definition to complement yours. The definition of super-x varies from jurisdiction to jurisdiction and I already found a contradictory account to your example. That mtrfaq is not the "bible" that every transportation authority adheres to. It admits that there are discrepencies in other terms, notably freeway and expressway.

Logically, an "undivided 4-lane freeway" makes no logical sense in practical and safety terms because the lack of median barrier reduces the possible speeds. The problem with your definition of super-x is that you have a fixation on the "undivided" aspect. In fact, your examples of super-2 and super-4 have not much in common other than "undivided" and "lack of property access"; your examples have entirely different purposes with a super-2 likely to be upgraded in the future to a full freeway while a super-4 is stuck where it is because of a lack of median. Your super-4 example in that case is more akin to the Highway 7 (York Region) than a potential freeway.

Say we have a super-2 expressway with at-grade intersections, but enough right-of-way to twin it and replace the at-grade with interchanges and overpasses for a multilane freeway. Say we twin that super-2 but leave the at-grade intersections for the time being. Does a twinned super-2 stop being a super-x just because it is no longer "undivided"? Keep in mind that a super-2 that is twinned allows for higher speeds due to the median barrier even if at-grade intersections remain. Then what if interchanges/overpasses replace all at-grade intersections? Does it become super again as a superhighway or full freeway?

Thus, super-4 expressway should apply to a 4 lane divided road with at-grade intersections, but with right-of way to replace them with interchanges.

Uhhh...the DEFINITION of Super-4 is that's it's EXACTLY the same as a Super-2, only with four lanes instead of two. There are NO other differences! It might not make logical sense in a long-form highway, which is why there are few of them (the Westmorland Street Bridge in Fredericton is the only local example I can think of in my area). If a super-2 is twinned, it is no longer a super-2. That's always been the definition I've heard. Kirjtc2 04:02, 16 July 2005 (UTC)
Finally, someone who knows what they're talking about. Snickerdo 06:04, 16 July 2005 (UTC)

[edit] I-95 North of Houlton, Maine

Can anyone confirm this stretch is still a super-2? AFAIK, it's been upgraded to a 4 lane divided freeway all the way to the Canadian border. LoveOfFate talk 03:29, 9 March 2006 (UTC)

Google Maps says you are correct.[3] Follow the map to the right all the way to the Canuck border, and you'll see that it's 4 lane divided. The bridges and other hints clearly show that one side is newer than the other, though. Nova SS 04:16, 9 March 2006 (UTC)

[edit] US 167 in El Dorado, AR is not a super 2

I found that US 167 in El Dorado is not a super 2.[4]. Its intersection with AR 7 is controlled[5], but that's about it. Nova SS 04:41, 9 March 2006 (UTC)

[edit] Official definitions of super-2

Oklahoma:

As used in this section, a super two-lane highway shall mean any two-lane highway with designated passing lanes, and consisting of paved shoulders not less than eight (8) feet in width.

Ohio:

A super two-lane highway, wider than a normal two-lane road, is designed to allow for safer, faster travel, because it includes turn lanes and deacceleration lanes, Athens County Commissioner David Ratliff said.

National Freight Transportation Workshop Proceedings:

The two studies found an alternative called "super two" lane roads that were economically justified. The features of a super-two highway are:
two paved travel lanes 12- to 15-feet wide
10-foot paved shoulders, or at least a three-foot strip of asphalt and the balance graveled, with a 33-foot clear zone in rural area
a design speed of 70-miles per hour except a 60-mph limit in rolling hills
maximum grade of three degrees
vertical clearance of at least 16-feet
bridges that exceed road width by three-feet on each side
passing lanes every five miles
bypasses around smaller communities
turn lane and acceleration lanes at intersections

Semisequicentennial Transportation Conference Proceedings

Super Two refers to a freeway or controlled access at-grade roadway with a single through lane per direction. The design features of the Super Two work together to maximize the capacity of that single lane. The key defining elements of a Super Two include:
Full width lanes, paved shoulders, and clear zones
A center buffer area
Limited access, with turn lanes for all permitted turns
Horizontal and vertical curves with high design speeds
Passing lanes, speed differential, and truck lanes
Provisions for expansion to freeway or divided roadway
Proper interchange design for a two-lane freeway

Minnesota:

Super Two: a two-lane highway with wide shoulders and periodic passing lanes

AASHTO safety?:

Even though there is a broad range of definitions for the "Super Two" design in both the United States and Europe, most definitions are characterized by wider cross sections. These designs include wider lanes, wider full-strength shoulders, and high-speed alignment with 100-percent passing sight distance. A common design for the United States includes 14-ft travel lanes, 10-ft shoulders, and a design speed of 70 mph. The design may also include alternating passing lanes and sometimes two-way left-turn lanes.

It looks like most official (non-roadgeek) definitions are what's referred to here as a "super-2 expressway". I'm thinking of moving this article to two-lane freeway or undivided freeway, while super two should deal with the actual definition. --SPUI (T - C - RFC - Curpsbot problems) 18:22, 18 April 2006 (UTC)

[edit] Highway 16 (Ontario)?

The article on Ontario highway 16/416 links here. The (former) Ontario 16 highway (Ogdensburg NY - Ottawa ON) did use what is now the northbound 416 freeway from Johnstown to Manotick as a two-lane highway with a posted speed limit of 56mph (90km/h) instead of the 50mph (80km/h) in use on most other two-lane Ontario highways, but is this enough to qualify it as a two-lane freeway or super-two if (before the rest of the 416 was constructed):

  • The highway, while routed away from any villages through a freeway-sized and vacant right-of-way, did not have any of its overpasses installed until after it was upgraded to build a 400-series freeway
  • Major intersections (such as the crossroads of former highways 16 and 43) did use traffic lights and level crossing
  • While traffic lights were rare, all intersections were level crossings. These were either turned into overpasses or dead-ends (where a rural secondary road is terminated just short of the highway) once this was replaced with a freeway.
  • There were no businesses, driveways or services of any kind on this stretch of road, as it was intended for later upgrade to limited-access.

So basically an undivided two-lane road with level crossings at all intersections. Sure, it was planned and built to be routed on the path of what was later to be a freeway, but (other than the wide right-of-way and the absence of any buildings at roadside) what makes this a two-lane freeway as opposed to just another provincial highway in the middle of nowhere? --carlb 14:23, 29 August 2006 (UTC)

[edit] Natchez Trace Parkway?

It's hard to tell, as the article doesn't clearly define a two-lane freeway (versus a regular two-lane highway), but would the Natchez Trace Parkway (and possibly other NPS parkways, such as the Blue Ridge Parkway and the Colonial Parkway, although I'm not personally familiar with them) be considered two-lane freeways? They (at least the Natchez Trace) are limited access (and do not stop for cross traffic ever), contained in their own right-of-way, and feel very much like driving a two-lane freeway (although the NPS keeps the speed limits deliberately low--50, in the case of the Natchez Trace, lower on the others, I think, despite road conditions being fine for 65, 70 or higher). I didn't want to add them to this article without checking first. Thoughts? cluth 08:41, 25 January 2007 (UTC)

It's true that they are in esscence limited access two lane roads. However, because the term "freeway" kind of implies a high speed route through route, I'm not 100% on adding those roads. Not totally opposed though either. The parkways were built for scenic purposes as opposed to most roads which are meant to carry goods and people from one place to another. It would be nice if we had a clear definition of a two lane freeway from AASHTO or someone and then it would be easier to decide whether to add them.--Analogue Kid 14:01, 25 January 2007 (UTC)
I've never heard of any of those being considered freeways. - Aerobird Target locked - Fox One!

[edit] Franconia Notch Parkway (I-93)

...is actually a mixture of 4 lanes (southern state park boundary to exit 34A, and exit 34C to northern state park boundary), 3 lanes (2 northbound, 1 southbound) in the southern portion of the Notch, and 2 lanes northward to exit 34C. No, I don't recall the exact mile marker where the second northbound lane drops out, but it's well north of exit 34A (where the second southbound lane reappears). The official Parkway (designated by white-on-brown informational signs) includes a long stretch of 4-lane interstate-grade road with a 45 MPH speed limit in the southern section of FNSP. —The preceding unsigned comment was added by 18.78.7.125 (talk) 19:19, 31 January 2007 (UTC).

[edit] Compare and contrast with other countries

This article and discussion may be suffering from a natural US bias, since most of us haven't had the opportunity to drive across that big lake between the US and Europe. But it looks like some similar road types exist over there:

  • Super two, as defined in Ireland, might look like just a wide two-lane highway here.
  • 2+1 road, in Ireland and possibly Denmark, appears to be a road like Kentucky's Daniel Boone Parkway (sorry, Hal Rogers Parkway, because nobody's heard of Daniel Boone :P ) except that it has a tensabarrier (linky?) in the middle and no passing except where the third lane exists.

Both articles have rudimentary sections dealing with US applications. It seems like for the non-roadgeek community, it would be helpful to merge the articles into an overview of road types that don't quite reach the bar of four-lane-plus, fully-controlled-access. For us roadgeeks, we badly need our own roadwiki, where we can define every possible permutation of highway type and designation. If the Trekkies can have their Memory Alpha, why can't we? --Robertb-dc 22:18, 4 June 2007 (UTC)