Turret lathe
From Wikipedia, the free encyclopedia
The turret lathe is a form of metalworking lathe that is used for repetitive production of duplicate parts (which by the nature of their cutting process are usually interchangeable). It evolved from earlier lathes with the addition of the turret, which is an indexable toolholder that allows multiple cutting operations to be performed, each with a different cutting tool, in easy, rapid succession, with no need for the operator to perform setup tasks in between (such as installing or uninstalling tools) nor to control the toolpath. (The latter is due to the toolpath's being controlled by the machine, either in jig-like fashion [via the mechanical limits placed on it by the turret's slide and stops] or via IT-directed servomechanisms [on CNC lathes].)
[edit] Types of turret lathes, and their nomenclature
[edit] Overview
There are many variants of the turret lathe. They can be most generally classified by size (small, medium, or large); method of control (manual, automated mechanically, or automated via computer [NC, CNC]); and orientation (horizontal or vertical).
[edit] The archetypical turret lathe: horizontal, manual
The archetypical turret lathe, and the first in order of historical appearance, is the horizontal-bed, manual turret lathe. In machine-shop jargon, the term turret lathe without further qualification is still usually understood in context to refer to this type. The formative decades for this class of machine were the 1840s through 1860s, when the basic idea of mounting an indexable turret on a bench lathe or engine lathe was elaborated upon, developed, and disseminated into factories. Some important tool-builders in this development were Stephen Fitch; Gay, Silver & Co.; Elisha K. Root of Colt; J.D. Alvord of the Sharpe Armory; Frederick W. Howe, Richard S. Lawrence, and Henry D. Stone of Robbins & Lawrence; J.R. Brown of Brown & Sharpe; Pratt & Whitney; and later various designers at these and other firms.[2]
[edit] Semi-automatic turret lathes
Sometimes machines similar to those above but with power feeds and automatic turret-indexing at the end of the return stroke are called semi-automatic turret lathes. This nomenclature distinction is blurry and not consistently observed. The term turret lathe encompasses them all.
During the 1860s, when semi-automatic turret lathes were developed, they were sometimes called automatic (what we today would call automatics, that is, fully automatic machines, had not been developed yet). During that era both manual and semi-automatic turret lathes were sometimes called screw machines, although we today reserve that term for fully automatic machines.
[edit] Automatic turret lathes (mechanically automated)
During the 1870s through 1890s, the automatic turret lathe was developed and disseminated. These machines can execute many part-cutting cycles without human intervention. Thus the duties of the operator (which were already greatly reduced by the manual turret lathe) were even further reduced, and productivity increased. These machines use cams to automate the sliding and indexing of the turret and the opening and closing of the chuck. Thus, they execute the part-cutting cycle somewhat analogously to the way in which an elaborate cuckoo clock performs an automated theater show. Christopher Miner Spencer built the first one, which he patented in 1873. Unfortunately his patent attorney failed to protect the most significant part, the cam drum (which Spencer called the "brain wheel").[3] Therefore many other people quickly took up the idea. Later important developers of fully automatic machines were S. L. Worsley (who developed a single-spindle machine for Brown & Sharpe), and Reinhold Hakewessel (who eventually joined National-Acme) and George O. Gridley (of Acme-Gridley and New Britain-Gridley), who developed multiple-spindle variants.[4] Small- to medium-sized automatic turret lathes are usually called screw machines (aka automatic screw machines), while larger ones are usually called automatic chucking lathes, automatic chuckers, or chuckers.
At the same time that fully automatic screw machines were being developed in New England, growing out of the manual turret lathe, they were also being independently developed in Switzerland, with some differing influences. The differences and similarities between the American and Swiss machines are interesting to compare.
Machine tools of the "automatic" variety ("automatic" in that pre-IT era meaning mechanically automated) had already reached a highly advanced state by the World War I era.
[edit] CNC lathes and second-operation lathes
When World War II ended, the digital computer was poised to develop from a colossal laboratory curiosity into a practical technology that could begin to disseminate into business and industry. The advent of IT-based automation in machine tools (via NC and then CNC) displaced to a large extent (but not at all completely) the previously existing manual and mechanically automated machines. Today, most CNC lathes have turrets, and so could logically be called turret lathes, but the terminology is usually not used that way. Horizontal CNC lathes, with or without turrets, are generally called CNC lathes or CNC turning centers or turning centers, and the term turret lathe by itself is still usually understood in context to refer to horizontal, manual turret lathes. The changed role in the production process that such machines now play is reflected in another name for them, which is second-operation lathe (or second operation lathe to carefree hyphenators), as explained later.
[edit] Vertical turret lathes
The term vertical turret lathe (VTL) is applied to machines wherein the same essential design of the horizontal version is upended, which allows the headstock to sit on the floor and the faceplate to become a horizontal rotating table (analogous to a huge potter's wheel). This is useful for the handling of very large, heavy, short workpieces. Vertical lathes in general are also called vertical boring mills or often simply boring mills; therefore a vertical turret lathe is a vertical boring mill equipped with a turret. Today's CNC versions are called CNC VTLs.
 |
|
|
|
[edit] Other variations of design and nomenclature
[edit] Capstan versus turret
The term capstan lathe overlaps in sense with the term turret lathe to a large extent. It has in many times and places been understood to be synonymous with turret lathe. In other times and places it has been held in technical contradistinction to turret lathe, with the difference being in whether the turret's slide is fixed to the bed (aka ram-type turret) or slides on the bed's ways (aka saddle-type turret).[5] [6] The difference in terminology is mostly a matter of UK and Commonwealth usage versus American usage.[7] American usage tends to call them all turret lathes.
The word capstan could logically seem to refer to the turret itself, and to have been inspired by the nautical capstan. A lathe turret with tools mounted in it can very much resemble a nautical capstan full of handspikes. This interpretation would lead Americans to treat capstan as a synonym of turret and capstan lathe as a synonym of turret lathe. However, the multi-spoked handles that the operator uses to advance the slide are also called capstans, and they themselves also resemble the nautical capstan.
No distinction between turret lathe and capstan lathe persists upon translation from English into other languages. Most translations involve the term "revolver", and serve to translate either of the English terms.
The words turret and tower (the former being a diminutive of the latter) come ultimately from Latin turris, "tower", and the use of turret both to refer to lathe turrets and to refer to gun turrets seems certainly to have been inspired by its earlier connection to the turrets of fortified buildings and to siege towers. The history of the rook in chess is connected to the same history (and the French word for "rook" is tour, "tower").
It is an interesting coincidence that the word tour in French can mean both "lathe" and "tower", with the first sense coming ultimately from Latin tornus, "lathe", and the second sense coming ultimately from Latin turris, "tower". (Tour revolver, tour tourelle, and tour tourelle revolver are various ways to say "turret lathe" in French.)
[edit] Flat-turret lathe
A subtype of horizontal turret lathe is the flat-turret lathe (more commonly styled flat turret lathe by carefree hyphenators). Its turret is flat (and analogous to a rotary table), allowing the turret to pass beneath the part. Patented by James Hartness of Jones & Lamson, and first disseminated in the 1890s, it was developed to provide more rigidity via requiring less overhang in the tool setup, especially when the part is relatively long.[8]
[edit] Monitor lathe
The term monitor lathe formerly (1860s-1940s) referred to the class of small- to medium-sized manual turret lathes used on relatively small work. The name was inspired by the monitor-class warships, which the monitor lathe's turret resembled. Today lathes of such appearance (for example, the Hardinge DSM-59 and its many clones) are still common, but the name monitor lathe is no longer current in the industry.
[edit] Toolpost turrets and tailstock turrets
Turrets can be added to non-turret lathes (bench lathes, engine lathes, toolroom lathes, etc.) by mounting them on the toolpost, tailstock, or both. Often these turrets are not as large as a turret lathe's, and they usually don't offer the sliding and stopping that a turret lathe's turret does; but they do offer the ability to index through successive tool settings.
[edit] Significance of turret lathes to the history of technology
[edit] Mid-19th century: don't treat duplicate parts like one-off parts
The development of the turret lathe around the middle of the 19th century was a key aspect of the advancement of manufacturing technology. Unlike bench lathes, engine lathes, and toolroom lathes, on which each tool change involved some amount of setup, and toolpath had to be carefully controlled by the operator, turret lathes allowed the multiple tool changes and toolpaths of one part-cutting cycle to be repeated with little time or effort. By taking the tool-changing and the toolpath control out of the hands of the operator and building it into the machine tool, it accomplished several feats: it made interchangeable parts easier, faster, and thus cheaper to produce; and it made their production possible by workers with little skill. As long as a few skilled engineers, toolmakers, and setup technicians made and equipped the machine correctly, just about any operator could be hired (inexpensively) to run it.
Another way to look at this change is that humans gradually figured out that they shouldn't treat duplicate parts like one-off parts. You don't need a master craftsman to cut each duplicate part as if it were unique; if you can set up a repeatable sequence of restricted movements, you can simply repeat the same sequence with each part. And if you can preserve the setting of each tool, so that a tool change does not destroy the setting but rather lets it be indexed back into position whenever needed, then you have saved vast amounts of time and effort.
The ideas above developed gradually, first in the armory practice of the mid and late 19th century (otherwise known as the American system), and then in true mass production during the 20th century. Those two phenomena have not always been differentiated from each other, but the difference is in the degree to which toolpath control had replaced skilled fitting. (Or, as it is more often [although more opaquely] expressed, the degree to which "the skill had been built into the machine tool".) The replacement did not happen overnight, but rather was a gradual tapering off of reliance upon fitting, the progress varying by plant and by decade, until it had been completely eliminated from the assembly process, creating true mass production.[9]
[edit] Late-19th through mid-20th centuries: key to mass production
From the late-19th through mid-20th centuries, turret lathes, both manual and automatic (i.e., screw machines and chuckers), were one of the most important classes of machine tools for mass production.
[edit] Mid-20th century to present: transition to small runs and second operations
With the development and dissemination of CNC lathes (which themselves often have automated turrets), manual turret lathes began to lose their position as the key to mass production of turned parts. However, they did not become obsolete; the focus of their use simply shifted from the main turning operations of mass production (which are now usually done by CNCs) to small runs (for which they can still compete in unit cost with CNC use) and second operations (such as re-chucking a part turned out by a CNC in order to make a few simple cuts on the back). This transition in primary job description is reflected in the name second-operation lathe, which is often synonymous with manual turret lathe. Similarly, cam-operated screw machines and chuckers did not disappear; they simply shifted to a different niche. They still often compete with CNC machines in terms of unit cost per part produced, depending on the difference in overhead. A CNC lathe with hefty payments may translate to higher overall costs than a screw machine or chucker that is long since paid for.
[edit] Description of an example part-cutting cycle on a manual turret lathe
The cycle explained below is very similar to the one shown in this educational video.
By pushing the handlever of a manual turret forward, the tool is moved via the turret's slide toward the workpiece being held by the chuck, soon making contact and cutting or forming the part. On the return stroke, the tool is retracted and then indexed to the next tool held in the turret. In this way, a sequence of operations can be performed on a part without switching tools with each operation. (That is, different tools can be shifted into position without the need to unscrew one and screw in another). Each tool can be set for a different travel (length of travel) by a stop screw located at the far right of the turret.
As an example, if one wanted to make a batch of special knurled-head screws, the turret could be set up with tools and used in this sequence:
- Stop to set length of bar stock to be machined;
- Box tool to turn diameter of stock down to threading size;
- Geometric die head to cut external threads on turned-down part,
- Knurling tool to knurl the screw's head.
After this, a front tool on the cross slide could cut a groove in the knurled area, providing a chamfer, and then a rear tool would be brought forward to cut the finished screw from the bar (called parting it off).
[edit] Reference citations
- ^ Hartness 1910.
- ^ Rolt 1965, p. 165.
- ^ Rolt 1965, p. 169.
- ^ Rolt 1965, p. 169-170.
- ^ Capstan and Turret differences
- ^ H.W. Ward & Co., Ltd 1938.
- ^ Rolt 1965, p. 165.
- ^ Roe 1937, p. 34-36.
- ^ Hounshell 1984.
[edit] Bibliography
- Hartness, James (1910), Hartness Turret Lathe Manual, Springfield, Vermont, USA: Jones and Lamson Machine Company.
- Hounshell, David A. (1984), From the American system to mass production, 1800-1932: the development of manufacturing technology in the United States, Baltimore, Maryland, USA: Johns Hopkins University Press, ISBN 9780801829758 OCLC 9830352.
- H.W. Ward & Co., Ltd (1938), Operators' Hand-book (4th ed.), Dale Road, Selly Oak, Birmingham, England: H.W. Ward & Co., Ltd.
- Roe, Joseph Wickham (1937), James Hartness: a Representative of the Machine Age at Its Best, New York: American Society of Mechanical Engineers, LCCN 37016470.
- Rolt, L.T.C. (1965), A Short History of Machine Tools, Cambridge, Massachusetts, USA: MIT Press, LCCN 65-12439. Co-edition published as Rolt, L.T.C. (1965), Tools for the Job: a Short History of Machine Tools, London: B. T. Batsford, LCCN 65-080822.
[edit] External links
- YouTube video showing example cycle on a manual turret lathe, narrated by operator.
- YouTube video showing the movement of the turrets and the taking of various cuts on a CNC vertical turret lathe.
- YouTube video showing the movement of the turret and the taking of various cuts on a manual engine lathe retrofitted with a CNC turret.
