Triangulation station
From Wikipedia, the free encyclopedia
A trigonometrical station, triangulation pillar or trig point is a fixed surveying station for the geodetic surveying and other surveying projects on nearby areas. They are generally known as Trigonometrical stations in North America and trig points in the United Kingdom, New Zealand and Australia; triangulation pillar is the more formal term for the concrete columns found in the UK.
Contents |
[edit] Use
The station is usually set up by government with known coordinate and elevation published. Many stations are located on the peaks of hills for the ease being spotted from many directions. A graved metal plate is on the top of a pillar for securing a theodolite or reflector.
Trigonometrical stations are grouped together to form a network of triangulation. Positions of all land boundaries, roads, railways, bridges and many other infrastructures can be accurately located by the network.
Trigonometrical stations are essential to the construction of modern infrastructure. Apart from the known stations set up by government, some temporary trigonometrical stations are set up near construction sites for monitoring the precision and progress of construction.
Some trigonometrical stations are equipped with Global Positioning Systems which greatly improve their accuracy.
Although many stations are no longer required for surveying purposes, they remain useful to hikers as navigational aids.
[edit] United Kingdom
In the United Kingdom, trig points are typically concrete pillars, and were erected by the Ordnance Survey.
The process of placing trig points on top of prominent hills and mountains began in 1935 to assist in the accurate retriangulation of Great Britain directed by the cartographer and mathematician Martin Hotine. In low lying or flat areas some trig points may be only a few metres above sea-level. When all the trig points were in place, it was possible, in clear weather, to see at least two other trig points from any one trig point. Careful measurements of the angles between the lines-of-sight of the other trig points then allowed the construction of a system of triangles which could then be referenced back to a single baseline to construct a highly accurate measurement system that covered the entire country.
In most of the United Kingdom, trig points are truncated square concrete (occasionally stone) pyramids or obelisks tapering towards the top, generally known as Hotine Pillars. On the top a brass plate with three arms and a central depression is fixed. A benchmark is set on the side, marked with the letters "O S B M" (Ordnance Survey Bench Mark) and the reference number of the trig point. Within the trig point, there are concealed mountings for a specialized theodolite, which was temporarily mounted on the trig point while measurements were taken. Many of these trig points are now disappearing from the countryside as their function has largely been superseded by aerial photography and digital mapping using lasers and GPS measurements.
[edit] Australia
A national geodetic survey and adjustment carried out in the early 1970s in Australia has left a legacy of trig stations consisting of a ground mark with a white quadripod supporting a black disc above the ground mark. These trig stations are clearly visible for many kilometres and useful for hikers.
[edit] Photo gallery
 An Australian trig point |
 A benchmark on a trig point in North Wales |
 A metal plate for theodolite |
|
 A New Zealand trig point. This one is at the top of Mount John |
.JPG/120px-Beeston_Bump_4th_November_2007_(7).JPG) Triangulation pillar on the Summit of Beeston Bump in Norfolk, United Kingdom. |
 Napier Hill trig, Napier, New Zealand. |
[edit] See also
- Geodesy
- Ordnance Survey
- Retriangulation of Great Britain
- Trigpointing is a 'sport' which has grown for people to individually go out, find and log the location of trig points.
[edit] External links
