Tied arch bridge
From Wikipedia, the free encyclopedia
A tied arch bridge is a truss bridge in which the outward-directed horizontal forces of the arch, or top chord, are borne as tension by the bottom chord (either tie-rods or the deck itself), rather than by the ground or the bridge foundations. Thrusts downward on such a bridge's deck are translated, as tension, by vertical ties of the deck to the curved top chord, tending to flatten it and thereby to push its tips outward into the abutments, like other arch bridges. However in a tied-arch or bowstring bridge, these movements are restrained not by the abutments but by the bottom chord, which ties these tips together, taking the thrusts as tension, rather like the string of a bow that is being flattened. Therefore the design is often called a 'bowstring arch' or 'bowstring girder' bridge. The elimination of horizontal forces at the abutments allows tied-arch bridges to be constructed with less robust foundations; thus they can be situated atop elevated piers or in areas of unstable soil.[1] In addition, since they do not depend on horizontal compression forces for their integrity, tied arch bridges can be prefabricated offsite, and subsequently floated, hauled or lifted into place. A notable case of these procedures was the installation of the Fremont Bridge.
[edit] References
- ^ For a nontechnical exposition, see J. E. Gordon, Structures; or Why Things Don't Fall Down (London: Penguin, 1978), pp. 208f.
[edit] Gallery of Tied Arch Bridges
|
|
The under-construction Haggerston bridge will carry the London Overground across the Regent's Canal from 2010. |
|
Eldest in the gallery, The Blackfriars Street Bridge is an 1875 cast-iron structure, still carrying motor and pedestrian traffic in the center of London, Ontario, Canada. |
Windsor Railway Bridge designed by Brunel and built in 1849. |