Tempe railway station, Sydney
From Wikipedia, the free encyclopedia
Tempe
|
|
---|---|
Eastern Suburbs & Illawarra Line | |
Station code | TME |
Suburb | Tempe |
Street(s) | Griffiths St |
Distance from Central Station | 6.84 km |
Altitude (above sea level) | ? m |
Types of stopping trains | Suburban all stops |
Number of platforms | 4 |
Number of tracks | 4 |
Platform arrangement | 2 side, 1 island |
Type of station | Ground |
Ticket barriers | No |
Transfers available | no |
Disabled access | No |
Station facilities | Link |
Tempe railway station is situated on the Illawarra Line of the CityRail system. It is located in the Sydney suburb of Tempe. The station is located between Sydenham railway station and the Wolli Creek Junction. It opened in 1884 with the construction of the Illawarra railway line to Hurstville[1]. The station consists of two side platforms and an island platform connected by an overbridge at the northern end, which previously facilitated interchange between the East Hills and Illawarra lines. The platforms retain their original station buildings. There is no lift access to the platforms
Contents |
[edit] Platforms/Service
The station is served by 2-4 local Illawarra line services per hour which usually utilise platforms 3 and 4. Before the opening of the Airport line, Tempe was the junction between the East Hills Line and Illawarra Line. Most of the East Hills line services now run via the Airport and those running via Sydenham do not stop at Tempe. Platforms 1 and 2 do not see regular timetabled service.
Platform 1:
- Not currently in use - this was formerly for Airport & East Hills Line trains if they served the station.
Platform 2:
- Not currently in use - this was formerly for Airport & East Hills Line trains if they served the station.
Platform 3:
- Eastern Suburbs & Illawarra Line - all stations services to Bondi Junction.
Platform 4:
- Eastern Suburbs & Illawarra Line - all stations services to Hurstville, Mortdale and Waterfall.
[edit] Trackplan
[edit] Gallery
[edit] Neighbouring stations
Preceding Station (inbound) |
Line | Following Station (outbound) |
|
& Illawarra Line |
|
[edit] References
- ^ South Coast Line. NSWrail.net. Retrieved on 8 January 2007.
|
|||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
|
- Tempe railway station, Sydney is at coordinates Coordinates: