TASCAM Digital Interface

From Wikipedia, the free encyclopedia

This article does not cite any references or sources. (April 2007)
Please help improve this article by adding citations to reliable sources. Unverifiable material may be challenged and removed.

The Tascam Digital Interface (TDIF) is a proprietary format connector defined by TASCAM that uses a 25-pin D-sub cable to transmit and/or receive up to eight channels of digital audio between compatible devices. Unlike the ADAT lightpipe connection, TDIF uses a bidirectional connection, meaning that only one cable is required to connect the eight ins and outs of one device or another.

The Initial specification available to implementers was called TDIF-1 Version 1.0.

The first product with this connector was the TASCAM DA-88. That implementation did not include the ability to derive a word clock syncronization between the DA-88 and another TDIF-1 device, so a BNC WORD CLOCK connection was required as well.(cite: DA-88 users manual) Later TASCAM products included the ability to sync to the TDIF-1 connection, although that still excluded the DA-88. (cite:DA-38 users manual). Other manufacturers vary in their completeness of implementation. ^[1]

The signal labelled "word clock" in the TDIF-1 spec is delayed 270 degrees (90 degrees advanced) with respect to the word clock visible from the BNC word clock output. This is because the TDIF-1 spec was derived from the digital audio transmitter of the NEC uPD6381 DSP used in the DA-88.

The TDIF-1 Version 1.1 specification includes parity and other channel information bits. TDIF-1 Version 2.0 includes specification for double speed and quad speed (e.g. 96kHz and 192kHz) rates at reduced channel counts.^[2]

The TASCAM X-48 supports 96kHz at full channel count over 6 TDIF-1 connectors, using a post Version 2.0 specification. ^[3]