Talyllyn (locomotive)
From Wikipedia, the free encyclopedia
 Talyllyn at Abergynolwyn Station in 1999 |
|
| Power type | steam |
|---|---|
| Builder | Fletcher, Jennings & Co. |
| Serial number | 42 |
| Model | Class C |
| Build date | 1864 |
| Total production | 1 |
| Configuration | 0-4-2 |
| Gauge | 2 ft 3 in (686 mm) |
| Wheel diameter | 2' 4" |
| Wheelbase | 8' |
| Locomotive weight | 11 tons 18 cwt |
| Boiler pressure | 160lb/sq. in. |
| Cylinders | 2 |
| Cylinder size | 85⁄8" x 16" |
| Tractive effort | 5,781 lbs. |
Talyllyn is a narrow gauge steam locomotive. It was built by Fletcher, Jennings & Co. in 1864 and is one of the oldest locomotives still in active service. It was delivered to the Talyllyn Railway on September 24, 1864[1] and continues to run on this railway.
[edit] History
The Talyllyn Railway was the first British narrow gauge line to be built as a steam hauled railway from its conception. The company ordered two locomotives for its opening, Talyllyn and Dolgoch. Both were built by Fletcher, Jennings & Co. of Whitehaven though to very different designs. Talyllyn was the first order the company had delivered to north Wales and the first narrow gauge locomotive they had built with plate frames. [2] It was built to the company's C Class design, although it was the first member of its class to be built to a gauge less than 2 ft 8 in (813 mm). [1]
The locomotive was originally delivered as an 0-4-0 ST with an open cab. Early tests on the railway showed that this wheel arrangement lead to unacceptable vertical oscillation, and in January 1867, Talyllyn was returned to its manufacturer for the fitting of a pair of trailing wheels, converting it into an 0-4-2 ST. A cab was subsequently fitted in the railway's workshops at Pendre. [2]
One unusual feature of the conversion of Talyllyn to an 0-4-2 wheel arrangement is that the trailing axle was fixed rigidly to the frame, resulting in an overall wheelbase of 8ft. Most 0-4-2 locomotives have the trailing wheels that are able to swivel independently of the frame, thus avoiding creating a long fixed wheelbase. To accommodate Talyllyn's long wheelbase, the gauge of the Talyllyn Railway was increased marginally to between 2ft 3½in and 2ft 4in. [1]
The locomotive was returned to Fletcher Jennings for a second time around 1900, although the reason for this visit is not recorded. Repairs and improvements were also made at Pendre over the years, including alterations to the cab, fitting of a footplate at the front of locomotive and of a sandbox. A new set of frames supplied by W.G. Bagnall's was also fitted at Pendre, again around 1900. [1]
Talyllyn remained in service for most of the life of original railway. By the time of the Second World War it had fallen into a very poor state of repair, as it was the more popular of the two locomotives and was used more frequently. [1] It was finally retired in 1945 when its boiler and firebox were found to be beyond use or further repair. At this time the locomotive was still carrying its original 1864 boiler. [2]
[edit] Preservation
Following the rescue of the Talyllyn Railway in 1951, Talyllyn was inspected and found to be beyond economic repair. However as the railway's fortunes improved it became possible to consider a major overhaul. In 1957 the locomotive was sent away to the Gibbons Brother's Brierly Hill engineering works at Lenches Bridge in Pensnett[3] for a complete renewal. A new boiler, saddletank and bunker were built and Talyllyn returned to service in 1958. [2]
[edit] References
- ^ a b c d e Boyd, James I.C. (1988). The Talyllyn Railway. WildSwan Publications. ISBN 0906867460.
- ^ a b c d Boyd, James I.C. (1965). Narrow Gauge Railways in Mid Wales. The Oakwood Press.
- ^ Bate, John L.H. (2001). The Chronicles of Pendre Sidings: a personal account of the first railway preservation society in the world: The Talyllyn Railway Preservation Society 1950-2000. Rail Romances. ISBN 190062205X.
