Stream gradient

From Wikipedia, the free encyclopedia

This article does not cite any references or sources. (December 2007)
Please help improve this article by adding citations to reliable sources. Unverifiable material may be challenged and removed.

Stream gradient is the ratio of drop in a stream per unit distance, usually expressed as feet per mile or meters per kilometer. A high gradient indicates a steep slope and rapid flow of water (ie. more ability to erode); whereas a low gradient indicates a more nearly level stream bed and sluggishly moving water, that may be able to carry only small amounts of very fine sediment. High gradient streams tend to have steep, narrow V-shaped valleys, and are referred to as young streams. Low gradient streams have wider and less rugged valleys, with a tendency for the stream to meander.

A stream that flows upon a uniformly erodible substrate will tend to have a steep gradient near its source, and a low gradient nearing zero as it reaches its base level. Of course, a uniform substrate would be rare in nature; hard layers of rock along the way may establish a temporary base level, followed by a high gradient, or even a waterfall, as softer materials are encountered below the hard layer. Human dams, glaciation, changes in sea level and many other factors can also change the "normal" gradient pattern.

On topographic maps, stream gradient can be easily approximated if the scale of the map and the contour intervals are known. Contour lines form a V-shape on the map, pointing upstream. By counting the number of lines that cross a certain segment of a stream, multiplying this by the contour interval, and dividing that quantity by the length of the stream segment you can determine the stream gradient. Because stream gradient is customarily given in feet per 1000 feet you should measure the amount a stream segment rises and the length of the stream segment in feet, then multiply feet per foot gradient by 1000. For example, if one measures a scale mile along the stream length, and counts three contour lines crossed on a map with ten-foot contours, the gradient is approximately 5.7 feet per 1000 feet, a fairly steep gradient.