Stokes' law
From Wikipedia, the free encyclopedia
- For a theorem in differential geometry, see Stokes' theorem.
In 1851, George Gabriel Stokes derived an expression, now known as Stokes' law, for the frictional force — also called drag force — exerted on spherical objects with very small Reynolds numbers (e.g., very small particles) in a continuous viscous fluid. Stokes' law is derived by solving the Stokes flow limit for small Reynolds numbers of the generally unsolvable Navier–Stokes equations:[1]
where:
-
- Fd is the frictional force (in N),
- μ is the fluid's dynamic viscosity (in Pa s),
- R is the radius of the spherical object (in m), and
- V is the particle's velocity (in m/s).
If the particles are falling in the viscous fluid by their own weight due to gravity, then a terminal velocity, also known as the settling velocity, is reached when this frictional force combined with the buoyant force exactly balance the gravitational force. The resulting settling velocity (or terminal velocity) is given by:[2]
where:
-
- Vs is the particles' settling velocity (m/s) (vertically downwards if ρp > ρf, upwards if ρp < ρf ),
- g is the gravitational acceleration (m/s2),
- ρp is the mass density of the particles (kg/m3), and
- ρf is the mass density of the fluid (kg/m3).
Note that for molecules Stokes' law is used to define their Stokes radius.
Contents |
[edit] Applications
Stokes's law is the basis of the falling sphere viscometer,in which the fluid is stationary in a vertical glass tube. A sphere of known size and density is allowed to descend through the liquid. If correctly selected, it reaches terminal velocity, which can be measured by the time it takes to pass two marks on the tube. Electronic sensing can be used for opaque fluids. Knowing the terminal velocity, the size and density of the sphere, and the density of the liquid, Stokes' law can be used to calculate the viscosity of the fluid. A series of steel ball bearings of different diameter is normally used in the classic experiment to improve the accuracy of the calculation. The school experiment uses glycerine as the fluid, and the technique is used industrially to check the viscosity of fluids used in processes. It includes many different oils, and polymer liquids such as solutions.
The same theory can be used to explain why small water droplets (or ice crystals) can remain suspended in air (as clouds) until they grow to a critical size and start falling as rain (or snow and hail). Similar use of the equation can be made in the settlement of fine particles in water or other fluids.
The CGS unit of kinematic viscosity was named "stokes" after his work.
[edit] Stokes flow around a sphere
[edit] Steady Stokes flow
In Stokes flow, at very low Reynolds number, the convective acceleration terms in the Navier–Stokes equations are neglected. Then the flow equations become, for an incompressible steady flow:[3]
where:
- p is the fluid pressure (in Pa),
- u is the flow velocity (in m/s), and
- ω is the vorticity (in s-1), defined as
By using some vector calculus identities, these equations can be shown to result in Laplace's equations for the pressure and each of the components of the vorticity vector:[3]
- and
Additional forces like those by gravity and buoyancy have not been taken into account, but can easily be added since the above equations are linear, so linear superposition of solutions and associated forces can be applied.
[edit] Flow around a sphere
For the case of a sphere in a uniform far field flow, it is advantageous to use a cylindrical coordinate system ( r , φ , z ). The z–axis is through the centre of the sphere and aligned with the mean flow direction, while r is the radius as measured perpendicular to the z–axis. The origin is at the sphere centre. Because the flow is axisymmetric around the z–axis, it is independent of the azimuth φ.
In this cylindrical coordinate system, the incompressible flow can be described with a Stokes stream function ψ, depending on r and z:[4][5]
with v and w the flow velocity components in the r and z direction, respectively. The azimuthal velocity component in the φ–direction is equal to zero, in this axisymmetric case. The volume flux, through a tube bounded by a surface of some constant value ψ, is equal to 2π ψ and is constant.[4]
For this case of an axisymmetric flow, the only non-zero of the vorticity vector ω is the azimuthal φ–component ωφ[6][7]
The Laplace operator, applied to the vorticity ωφ, becomes in this cylindrical coordinate system with axisymmetry:[7]
From the previous two equations, and with the appropriate boundary conditions, for a far-field uniform-flow velocity V in the z–direction and a sphere of radius R, the solution is found to be[8]
The viscous force per unit area σ, exerted by the flow on the surface on the sphere, is in the z–direction everywhere. More strikingly, it has also the same value everywhere on the sphere:[1]
with ez the unit vector in the z–direction. For other shapes than spherical, σ is not constant along the body surface. Integration of the viscous force per unit area σ over the sphere surface gives the frictional force Fd according to Stokes' law.
[edit] Terminal velocity
At terminal velocity — or settling velocity — the frictional force Fd on the sphere is balanced by the excess force Fg due to the difference of the weight of the sphere and its buoyancy, both caused by gravity:[2]
with ρp and ρf the mass density of the sphere and the fluid, respectively, and g the gravitational acceleration. Demanding force balance: Fd = Fg and solving for the velocity V gives the terminal velocity Vs.
[edit] See also
- Stokes flow
- Navier–Stokes equations
- Einstein relation (kinetic theory)
- Scientific laws named after people
- Drag (physics)
- Viscometry
[edit] References
- Batchelor, G.K. (1967). An Introduction to Fluid Dynamics. Cambridge University Press. ISBN 0521663962.
- Lamb, H. (1994). Hydrodynamics, 6th edition, Cambridge University Press. ISBN 9780521458689. Originally published in 1879, the 6th extended edition appeared first in 1932.